The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The network status information that displays depends on whether Network Fault Tolerance is enabled. When Network Fault Tolerance is enabled, Ethernet port 1 automatically takes over network communications if Ethernet port 0 fails. If Network Fault Tolerance is enabled, network status information displays for the network ports Ethernet 0, Ethernet 1, and Bond 0. If Network Fault Tolerance is not enabled, status information displays only for Ethernet 0.
Step 1 | Sign in to Cisco Unified IM and Presence Operating System Administration. | ||||||||||||||||||||||||||||||||
Step 2 | Select . | ||||||||||||||||||||||||||||||||
Step 3 | Review the
fields in the
Network
Configuration window, as described in the table below.
|
You can view the software versions and installed software options.
Step 1 | Sign in to Cisco Unified IM and Presence Operating System Administration. | ||||||||
Step 2 | Select . | ||||||||
Step 3 | Review the fields in the Software Packages window described in
the table below.
|
Step 1 | Sign in to Cisco Unified IM and Presence Operating System Administration. | ||||||||||||||||||||||||||
Step 2 | Select . | ||||||||||||||||||||||||||
Step 3 | Review the
fields in the
System
Status window, as described in the table below.
|
Step 1 | Sign in to Cisco Unified IM and Presence Operating System Administration. | ||||||||||||||||
Step 2 | Select . | ||||||||||||||||
Step 3 | To filter or search records, perform one of the following actions: | ||||||||||||||||
Step 4 | Select Find. | ||||||||||||||||
Step 5 | Review the fields in the System Status window.
|