Cisco UCS X210c M6 Compute Node Installation and Service Note

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: September 22, 2025

Chapter: Technical Specifications

Technical Specifications
Physical Specifications for the UCS X210c M6 Compute Node
Environmental Specifications

Technical Specifications

This appendix contains the following topics:

Physical Specifications for the UCS X210c M6 Compute Node


Specification	Value
Height	1.93 inches (49.02 mm)
Width	11.79 inches (299.47 mm)
Depth	24.97 inches (634.24 mm)
Weight	The weight depends on the components installed. Minimally configured compute node weight: 12.84 lb (5.83 kg) Fully configured compute node weight: 25.1 lb (11.39 kg)

Environmental Specifications


Specification	Value
Temperature, Operating	50° to 95° F (10° to 35° C) at 0 to10,000 ft altitude
Temperature, Non-Operating	-40° to 149° F (–40° to 65° C)
Humidity, Operating	5% to 93% noncondensing
Humidity, Non-Operating	5% to 93% noncondensing
Altitude, Operating	0 to 10,000 ft (0 to 3000m); maximum ambient temperature decreases by 1°C per 300m
Altitude, Non-Operating	40,000 ft (12,000m)

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)