Firmware Upgrades

Firmware Upgrades

Beginning with Cisco UCS Manager Release 6.0(1b), Cisco is releasing unified Cisco UCS Manager software and firmware upgrades for the following platforms with every release of Cisco UCS Manager:

  • Cisco UCS 6600 Series Fabric Interconnect with Cisco UCS X-Series and C-Series servers.

  • Cisco UCS Fabric Interconnects 9108 100G with Cisco UCS X-Series servers.

  • Cisco UCS 6500 Series Fabric Interconnect with Cisco UCS B-Series, C-Series, and S-Series servers.

  • Cisco UCS 6400 Series Fabric Interconnect with Cisco UCS B-Series, C-Series, and S-Series servers.

You can upgrade the firmware through Auto Install, packages in service profiles, using the firmware automatic synchronization server policy, and directly at endpoints. For more information on guidelines and installing firmware, see the Cisco UCS Firmware Management Guide.

Verifying Firmware Versions on Components

Procedure

Step 1

In the Navigation pane, click Equipment.

Step 2

In the Work pane, click the Firmware Management tab.

Step 3

On the Installed Firmware tab, review the firmware versions listed for each component.

For more information on guidelines and installing firmware, see the Cisco UCS Firmware Management Guide.