New and Changed Information
This section provides information on new features and changed behavior in Cisco UCS Manager, Release 3.1 (x).
|
Feature |
Description |
Where Documented |
|---|---|---|
|
VLAN Groups in vNIC Templates |
You can select VLAN groups in addition to any individual VLAN, while creating a vNIC template. |
Creating a vNIC Template |
|
Automatic configuration of fabric interconnect server ports |
Cisco UCS Manager automatically determines the type of device connected to the switch port and configures the switch port accordingly. |
|
Feature |
Description |
Where Documented |
|---|---|---|
|
Cisco UCS Manager Adapter Redundancy Groups added to vNIC Template pairs |
Cisco UCS Manager supports adapter redundancy groups in vNIC template pairs and enables validation of redundancy on a service profile. |
|
|
Cisco UCS Manager VXLAN with Receive Side-Scaling (RSS) stateless offloading |
Cisco UCS Manager supports VXLAN with Receive Side-Scaling (RSS) stateless offload on VIC adapters 1340, 1380, 1385, 1387, and SIOC on Cisco UCS C3260 for ESXi 6.0 and later releases. |
Configuring an Ethernet Adapter Policy to Enable Stateless Offloads with VXLAN |
|
Cisco UCS Manager IO Timeout Retry and LUN Queue Depth added for Windows environments |
Cisco UCS Manager supports two new options for fiber channel adapter policies for Windows environments. IO Retry Timeout adjusts the IO retry timeout after a pending command expires on a network device. LUN queue depth adjusts the initial queue depth for all LUNs on the adapter. |
Feedback