HP Server Tasks

This chapter contains the following sections:

Boot HP Server

Summary
Boot the HP Server
Description
This task allows user to COLD / WARM Boot the HP server.
Inputs
Input Description Mappable To Type Mandatory
Server Choose the server to boot hp​Server​Identity Y
Boot Mode Choose a boot mode hp​Server​Boot​Identity Y
Outputs
Output Description Type
OUTPUT_​HP_​SERVER_​IDENTITY Identity of the HP Server hp​Server​Identity

Enable/Disable Secure Boot for HP Server

Summary
To Configure Enable/Disable Secure Boot for HP Server
Description
This task creates a configuration job to enable or disable secure boot on an HP server.
Inputs
Input Description Mappable To Type Mandatory
Server Choose the host account hpServerIdentity Y
HP Secure Boot Choose to enable or disable secure boot HPSecureBootEnableDisable Y
Outputs
Output Description Type
OUTPUT_HP_SERVER_IDENTITY Identity of the HP Server hpServerIdentity

Enable Auto Power On for HP Server

Summary
Set the Auto Power On Delay
Description
This task allows user Enable or Disable the Auto Power On. Selection of Power On Delay will enable and set the new value for the delay.
Inputs
Input Description Mappable To Type Mandatory
Server Choose the HP server for which to enable auto power-on.​ hp​Server​Identity Y
Type Choose an auto power type hp​Server​Auto​Power​Saver​Identity Y
Outputs
Output Description Type
OUTPUT_​HP_​SERVER_​IDENTITY Identity of the HP Server hp​Server​Identity

Press HP Server Power Button

Summary
Press the power button in the HP Server
Description
This task allows user press or perss and hold power button. If the ACPI-aware operating system configured with any power button related action then it will be executed.
Inputs
Input Description Mappable To Type Mandatory
Server Choose the HP server hp​Server​Identity Y
Hold Check this option to press and hold the power button
Outputs
Output Description Type
OUTPUT_​HP_​SERVER_​IDENTITY Identity of the HP Server hp​Server​Identity

Reset HP Server

Summary
Reset the HP Server
Description
This task allows user reset the HP server. This script will NOT attempt to gracefully shutdown the host operating system before it powers off the server.
Inputs
Input Description Mappable To Type Mandatory
Server Choose the HP server hp​Server​Identity Y
Outputs
Output Description Type
OUTPUT_​HP_​SERVER_​IDENTITY Identity of the HP Server hp​Server​Identity

Resolve HP ILO Network Address

Summary
HP ILO Resolve Network Address
Description
This task allows user to resolve MAC address for the selected server NIC.
Inputs
Input Description Mappable To Type Mandatory
Server NIC Choose the HP server NIC hp​Server​Nic​Identity Y
Outputs
Output Description Type
OUTPUT_​HP_​SERVER_​NIC_​IDENTITY Identity of the HP Server NICs hp​Server​Nic​Identity
OUTPUT_​MAC_​ADDRESS HP ILO Server NIC's MAC Address hp​Server​Nic​Mac​Address

Set HP Server Boot Source

Summary
Boot source to boot from for HP Server
Description
This task allows user to set the boot Mode for the HP Server. The selected mode will get higher priority.
Inputs
Input Description Mappable To Type Mandatory
Server Choose the HP server boot source hp​Server​Identity Y
Source Choose a boot source hp​Server​Boot​Source​Identity Y
Outputs
Output Description Type
OUTPUT_​HP_​SERVER_​IDENTITY Identity of the HP Server hp​Server​Identity

Set HP Server Power Saver Mode

Summary
Power Saver Mode for HP Server
Description
This task allows user to set the Power Saver Mode for the HP Server. Auto mode make the power saver controlled by the OS.
Inputs
Input Description Mappable To Type Mandatory
Server Choose the HP server to power on hp​Server​Identity Y
Change Mode Choose a power mode hp​Server​Power​Saver​Identity Y
Outputs
Output Description Type
OUTPUT_​HP_​SERVER_​IDENTITY Identity of the HP Server hp​Server​Identity

Toggle HP Server Power

Summary
Power ON or Power OFF the HP Server
Description
This task allows user to Power On or Power off the HP server. A graceful shutdown will be attempted for ACPI-aware operating systems configured to support graceful shutdown.
Inputs
Input Description Mappable To Type Mandatory
Server Choose the HP server hp​Server​Identity Y
Power Choose the power on hp​Server​On​Off​Identiry Y
Outputs
Output Description Type
OUTPUT_​HP_​SERVER_​IDENTITY Identity of the HP Server hp​Server​Identity

Connect Virtual Media to HP Server

Summary
To Connect Virtual Media to HP Server
Description
This task allows you to connect virtual media to CD/DVD Drive of a HP server using an ISO file. You need to provide the path to the ISO file along with the necessary credentials (username and password) to access the ISO file path. The task includes an option to force the connection if needed.
Inputs
Input Description Mappable To Type Mandatory
HP Server Choose the HP server hpServerIdentity Y
Force Connect Check to Force connect Boolean
Use Credentials Check to Provide the credentials Boolean Y
Virtual Media URL Provide the complete path to the ISO file, including the filename (e.g., /path/to/file.iso) gen_text_input Y
User Name Provide the User name to access the Path gen_text_input
Password Provide the Password to access the Path password
Outputs
Output Description Type
OUTPUT_HP_SERVER_IDENTITY Identity of the HP Server hpServerIdentity