Core Faults
fltSysdebugCoreCoreFile
Process core dump generated: [name]
This fault typically occurs when process core dump is generated.
Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. If you cannot resolve the issue, create a show tech-support file and contact Cisco Technical Support.
fltStorageItemCapacityExceeded
Disk usage for partition [systemName] [name] exceeded 70%
This fault occurs when the partition disk usage exceeds 70% but is less than 90%.
If you see this fault, take the following actions:
Step 1
Reduce the partition disk usage to less than 70% by deleting unused and unnecessary files.
Step 2 If the above action did not resolve the issue, create a show tech-support file and contact Cisco TAC.
fltStorageItemCapacityWarning
Disk usage for partition [systemName] [name] exceeded 90%
This fault occurs when the partition disk usage exceeds 90%.
If you see this fault, take the following actions:
Step 1 Reduce the partition disk usage to less than 90% by deleting unused and unnecessary files.
Step 2 If the above action did not resolve the issue, create a show tech-support file and contact Cisco TAC.
fltStorageItemSpeedLowSD
Disk read speed [readSpeed] MB/s for partition [name] is less than 75 MB/s
This fault typically occurs when disk read speed is less than 75 MB/s.
Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. If you cannot resolve the issue, create a show tech-support file and contact Cisco Technical Support.
fltStorageItemSpeedDegradedSD
Disk read speed [readSpeed] MB/s for partition [name] is less than 100 MB/s
This fault typically occurs when disk read speed is less than 100 MB/s.
Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. If you cannot resolve the issue, create a show tech-support file and contact Cisco Technical Support.
fltStorageItemSpeedWarningSD
Disk read speed [readSpeed] MB/s for partition [name] is less than 125 MB/s
This fault typically occurs when disk read speed is less than 125 MB/s.
Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. If you cannot resolve the issue, create a show tech-support file and contact Cisco Technical Support.
fltCommSvcEpCommSvcNotDeployed
Communication Service configuration can’t be deployed. Error: [configStatusMessage]
This fault typically occurs because Cisco UCS Manager has detected an invalid communication policy confiuration.
If you see this fault, take the following actions:
Step 1 Verify that ports configured across all communication services is unique.
fltPkiTPStatus
[name] Trustpoint’s cert-chain is invalid, reason: [certStatus].
This fault occurs when certificate status of TrustPoint has become invalid.
If you see this fault, take the following actions:
Step 1 Identify the Trustpoint(s) affected.
Step 2 For affected trust-points, delete those keyrings using this trustpoint. Obtain new CA certificate and install.
fltPkiKeyRingStatus
[name] Keyring’s certificate is invalid, reason: [certStatus].
This fault occurs when certificate status of Keyring has become invalid.
If you see this fault, take the following actions:
Step 1 Identify the keyring(s) affected.
Step 2 If default keyring certificate is affected, regenerate the certificate.
Step 3 For other keyrings create new cert-req and get it signed by CA and set to keyring.
fltMgmtExportPolicyNo-scheduler-exists
scheduler [schedName] not found
This fault typically occurs when scheduler is missing.
Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. If you cannot resolve the issue, create a show tech-support file and contact Cisco Technical Support.
Feedback