The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Communication Service configuration can’t be deployed. Error: [configStatusMessage]
This fault typically occurs because Cisco UCS Manager has detected an invalid communication policy confiuration.
If you see this fault, take the following actions:
Step 1 Verify that ports configured across all communication services is unique.
Statistics database connect/read/write error (Possible database connectivity or disk space issue):[[lastDbStatus]] Please check
This fault occurs when the statistics database is configured incorrectly, is down, or ran out of disk space.
If you see this fault, take the following actions:
Step 1 Check the statistics database configuration, correct them if required.
Step 2 Check the statistics database to see if it is down or ran out of disk space..
Step 3 If the above action did not resolve the issue, create a show tech-support file and contact Cisco TAC.
[name] Trustpoint’s cert-chain is invalid, reason: [certStatus].
This fault occurs when certificate status of TrustPoint has become invalid.
Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. If you cannot resolve the issue, create a show tech-support file and contact Cisco Technical Support.
[name] Keyring’s certificate is invalid, reason: [certStatus].
This fault occurs when certificate status of Keyring has become invalid.
Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. If you cannot resolve the issue, create a show tech-support file and contact Cisco Technical Support.