Managing the I/O Modules

This chapter includes the following sections:

I/O Module Management in Cisco UCS Manager GUI

You can manage and monitor all I/O modules in a Cisco UCS domain through Cisco UCS Manager GUI.

Resetting an I/O Module

Procedure
    Step 1   In the Navigation pane, click the Equipment tab.
    Step 2   On the Equipment tab, expand Equipment > Chassis > Chassis Number > IO Modules.
    Step 3   Choose the I/O module that you want to reset.
    Step 4   In the Work pane, click the General tab.
    Step 5   In the Actions area, click Reset IO Module.
    Step 6   If the Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.

    Viewing the POST Results for an I/O Module

    You can view any errors collected during the Power On Self-Test process for an I/O module.

    Procedure
      Step 1   In the Navigation pane, click the Equipment tab.
      Step 2   On the Equipment tab, expand Equipment > Chassis > Chassis Number > IO Modules.
      Step 3   Choose the I/O module for which you want to view the POST results.
      Step 4   In the Work pane, click the General tab.
      Step 5   In the Actions area, click View POST Results.

      The POST Results dialog box lists the POST results for the I/O module.

      Step 6   Click OK to close the POST Results dialog box.