PSU Firmware Management
|
Enables you to manage the firmware on a PSU.
|
This feature is documented in the following configuration
guides:
The firmware management guides can be found here:
http://www.cisco.com/en/US/products/ps10281/products_installation_and_configuration_guides_list.html
|
Netflow
Monitoring
|
Enables you
to collect IP traffic data from netflow capable routers.
|
This feature
is documented in the following configuration guides:
The system
monitoring guides can be found here:
http://www.cisco.com/en/US/products/ps10281/products_installation_and_configuration_guides_list.html
|
LACP
|
Enables you
to use the link aggregation control protocol (LACP) policy to provide
additional control over link aggregation groups.
|
LACP Policy
|
Wear Level
Monitoring
|
Enables you
to monitor the life span of solid state drives on certain
Cisco UCS
blade servers.
|
This feature
is documented in the following configuration guides:
The system
monitoring guides can be found here:
http://www.cisco.com/en/US/products/ps10281/products_installation_and_configuration_guides_list.html
|
CIMC
Security Enhancements
|
Enables you
to restrict remote connectivity and use vMedia encryption.
|
CIMC Security Policies
|
Graphics
Card Monitoring
|
Enables you to view the properties of graphics cards and
controllers on certain
Cisco UCS
rack servers.
|
This feature
is documented in the following configuration guides:
The system
monitoring guides can be found here:
http://www.cisco.com/en/US/products/ps10281/products_installation_and_configuration_guides_list.html
|
Auto Install
Firmware Enhancements
|
Enables you
to view a list of warnings and potential issues before upgrading.
|
This feature is documented in the following configuration
guides:
The firmware management guides can be found here:
http://www.cisco.com/en/US/products/ps10281/products_installation_and_configuration_guides_list.html
|
Scriptable
vMedia Support
|
Enables you
to mount virtual media from a remote file location and is available through CLI
and WebGUI CIMC interfaces. This feature supports multiple share types
including NFS, CIFS, HTTP and HTTPS.
|
CIMC Mounted vMedia
|
Community
VLAN Support
|
Enables you
to create community VLANs on Fabric Interconnects and maintain multiple
community VLANs under a given primary VLAN. Also provides support for
promiscuous access and truck modes along with community access for server
vNICs.
|
Community VLANs
|
Logging
Exporter
|
Enables you
to export log files to a remote server before they are deleted.
|
This feature
is documented in the following configuration guide:
The system
monitoring guides can be found here:
http://www.cisco.com/en/US/products/ps10281/products_installation_and_configuration_guides_list.html
|
Anonymous Reporting
|
Enables you to retrieve anonymous reports from the SMTP server.
This feature can be enabled even when call home is disabled.
|
This feature is documented in the following configuration
guides:
The system monitoring guides can be found here:
http://www.cisco.com/en/US/products/ps10281/products_installation_and_configuration_guides_list.html
|
Information Policy on the Fabric Interconnect
|
Displays the uplink switches that are connected to Cisco UCS.
Once you enable information policy on the fabric interconnect, you can view the
LAN and SAN neighbors of the fabric interconnect.
|
Configuring the Information Policy on the Fabric Interconnect
|
Event Detection and Action
|
Retrieves the error statistics for the active network interface
ports using the NiErrStats policy. The retrieved information is sent to Cisco
UCS Manager.
|
Event Detection and Action
|
DIMM Blacklisting Support
|
Now supports Cisco C-Series rack server.
|
DIMM Blacklisting
|
C-Direct Rack Licenses
|
Now C-Direct rack licenses are supported on the ports that are
connected to the rack servers.
|
C-Direct Rack Licensing Support
|
CIMC Secure Boot
|
Allows only Cisco signed firmware images to be installed and run
on the Cisco C-Series rack servers.
|
CIMC Secure Boot
|
UEFI Secure Boot
|
Now supports Cisco C-Series rack server.
|
Configuring Server Boot
|
FX3S Controller
|
Updated controller for SD cards allows you to reset the
controller, format the SD cards, and enable automatic synchronization of your
paired SD cards.
|
FlexFlash FX3S Support
|