Cisco UCS C-Series Servers Integrated Management Controller Configuration Guide, Release 1.0(1x)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: January 21, 2010

Viewing Server Properties

This chapter includes the following sections:

Viewing CPU Properties
Viewing Memory Properties
Viewing Power Supply Properties
Viewing Storage Properties

Viewing CPU Properties

Procedure

Step 1

In the Navigation pane, click the Server tab.

Step 2

On the Server tab, click Inventory.

Step 3

In the Inventory pane, click the CPUs tab.

Step 4

Review the following information for each CPU:

Name	Description
Socket Name field	The socket in which the CPU is installed.
Serial Number field	The serial number for the CPU.
Vendor field	The vendor for the CPU.
Version field	The CPU version.
Number of Cores field	The number of cores in the CPU.
Signature field	The CPU signature.
Max Speed field	The maximum CPU speed supported by the socket.
Number of Threads field	The maximum number of threads that the CPU can process concurrently.

Viewing Memory Properties

Procedure

Step 1

In the Navigation pane, click the Server tab.

Step 2

On the Server tab, click Inventory.

Step 3

In the Inventory pane, click the Memory tab.

Step 4

Review the following information about memory:

Tip

Click a column header to sort the table rows, according to the entries in that column.

Name	Description
Name column	The name of the DIMM slot in which the memory module is installed.
Capacity column	The size of the DIMM, in megabytes.
Speed column	The clock speed of the memory module, in megahertz.
Type column	The memory type.

Viewing Power Supply Properties

Procedure

Step 1

In the Navigation pane, click the Server tab.

Step 2

On the Server tab, click Inventory.

Step 3

In the Inventory pane, click the Power Supplies tab.

Step 4

Review the following information for each power supply:

Tip

Click a column header to sort the table rows, according to the entries in that column.

Name	Description
Device ID column	The identifier for the power supply unit.
Input column	The input into the power supply, in watts.
Max Output column	The maximum output from the power supply, in watts.
FW Version column	The firmware version for the power supply.

Viewing Storage Properties

Procedure

Step 1

In the Navigation pane, click the Server tab.

Step 2

On the Server tab, click Inventory.

Step 3

In the Inventory pane, click the Storage tab.

Step 4

Review the following information about storage:

Tip

Click a column header to sort the table rows, according to the entries in that column.

Name

Description

Name column

The name of the storage device.

Status column

The status of the storage device. This can be:

absent
present

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)