Index
A
aaa accounting dot1x command 2-1
aaa authentication dot1x command 2-3
AAA methods 2-3
access control entries
access control lists
access groups
IP 2-150
MAC, displaying 2-534
matching for QoS classification 2-286
access list, IPv6 2-219
access mode 2-688
access ports 2-688
ACLs
as match criteria for QoS classes 2-286
deny 2-88
displaying 2-412
for non-IP protocols 2-264
IP 2-150
on Layer 2 interfaces 2-150
permit 2-329
action command 2-5
address aliasing 2-309
aggregate policers
applying 2-342
creating 2-337
displaying 2-566
QoS 2-339
aggregate-port learner 2-318
alarm-contact command 2-7
alarm-contact status, displaying 2-445
allowed VLANs 2-704
archive download-sw command 2-9
archive tar command 2-12
archive upload-sw command 2-15
arp (boot loader) command A-2
arp access-list command 2-17
attaching policy maps to interfaces 2-393
authorization state of controlled port 2-104
autonegotiation of duplex mode 2-116
B
backup interfaces
configuring 2-681
displaying 2-467
bandwidth, configuring for QoS 2-19
bandwidth command 2-19
boot (boot loader) command A-3
boot config-file command 2-23
boot enable-break command 2-24
boot helper command 2-25
boot helper-config file command 2-26
booting
Cisco IOS image 2-29
displaying environment variables 2-417
interrupting 2-24
manually 2-27
boot loader
accessing A-1
booting
Cisco IOS image A-3
helper image 2-25
directories
creating A-18
displaying a list of A-8
removing A-22
displaying
available commands A-13
memory heap utilization A-14
version A-29
environment variables
described A-23
displaying settings A-23
location of A-24
setting A-23
unsetting A-27
files
copying A-6
deleting A-7
displaying a list of A-8
displaying the contents of A-5, A-19, A-26
renaming A-20
file system
formatting A-11
initializing flash A-10
running a consistency check A-12
prompt A-1
resetting the system A-21
boot manual command 2-27
boot private-config-file command 2-28
boot system command 2-29
BPDU filtering, for spanning tree 2-626, 2-664
BPDU guard, for spanning tree 2-628, 2-664
broadcast storm control 2-674
bundling characteristics, UNI 2-126
burst bytes, in QoS policers 2-333, 2-338
C
cat (boot loader) command A-5
CBWFQ, configuring 2-19
CDP, enabling protocol tunneling for 2-244
CFM 2-317
CFM as OAM protocol 2-317
channel-group command 2-30
channel-protocol command 2-34
child policy maps 2-395
class-based traffic shaping 2-410
class-based weighted fair queuing
class command 2-36
class-map command 2-38
class-map configuration mode 2-38
class maps
creating 2-38
defining the match criteria 2-287, 2-289
displaying 2-421
matching in 2-38
class of service
clear ip arp inspection log command 2-40
clear ip arp inspection statistics command 2-41
clear ipc command 2-44
clear ipv6 dhcp conflict command 2-45
clear l2protocol-tunnel counters command 2-46
clear lacp command 2-47
clear logging onboard command 2-48
clear mac address-table command 2-49, 2-50
clear policer cpu uni-eni counters command 2-52
clear port-security command 2-53
clear spanning-tree counters command 2-56
clear spanning-tree detected-protocols command 2-57
clear vmps statistics command 2-59
command modes defined 1-1
committed information rate in QoS policers 2-333, 2-337
configuration files
password recovery disable considerations A-1
specifying the name 2-23, 2-28
configuring multiple interfaces 2-146
conform-action command 2-60
control-plane policer 2-52
control-plane policer information, displaying 2-567
control-plane security 2-344
control plane statistics, clearing 2-52
copy (boot loader) command A-6
copy logging onboard module command 2-62
CoS
as match criteria for QoS groups 2-287
for QoS classification 2-397
setting value in policy maps 2-397
CoS value, assigning to Layer 2 protocol packets 2-247
CPU ASIC statistics, displaying 2-422
CPU protection policers, displaying C-24
cpu traffic qos cos command 2-64
cpu traffic qos dscp command 2-68
cpu traffic qos precedence command 2-73
cpu traffic qos qos-group command 2-76
D
DC power supply 2-353
debug backup command B-2
debug dot1x command B-3
debug etherchannel command B-4
debug interface command B-7
debug ip dhcp snooping command B-8
debug ip igmp filter command B-9
debug ip igmp max-groups command B-10
debug ip igmp snooping command B-11
debug ip sla error twamp connection command B-12
debug ip sla error twamp control reflector command B-14
debug ip sla error twamp control server command B-16
debug ip sla error twamp session command B-18
debug ip sla trace twamp connection command B-20
debug ip sla trace twamp control reflector command B-22
debug ip sla trace twamp control server command B-24
debug ip sla trace twamp session command B-26
debug ip verify source packet command B-28
debug lacp command B-29
debug mac-notification command B-30
debug matm command B-31
debug matm move update command B-32
debug monitor command B-33
debug mvrdbg command B-34
debug nvram command B-35
debug pagp command B-36
debug platform acl command B-37
debug platform backup interface command B-38
debug platform cfm command B-39
debug platform cpu-queues command B-40
debug platform dot1ad command B-42
debug platform dot1x command B-43
debug platform etherchannel command B-44
debug platform forw-tcam command B-45
debug platform ip arp inspection command B-46
debug platform ipc command B-55
debug platform ip dhcp command B-47
debug platform ip igmp snooping command B-48
debug platform ip multicast command B-50
debug platform ip source-guard command B-52
debug platform led command B-56
debug platform matm command B-57
debug platform messaging application command B-58
debug platform phy command B-59
debug platform pm command B-61
debug platform policer cpu uni-eni command B-63
debug platform port-asic command B-64
debug platform port-security command B-65
debug platform qos-acl-tcam command B-66
debug platform qos-manager command B-67
debug platform remote-commands command B-68
debug platform rep command B-69
debug platform resource-manager command B-70
debug platform snmp command B-71
debug platform span command B-72
debug platform supervisor-asic command B-73
debug platform sw-bridge command B-74
debug platform tcam command B-75
debug platform udld command B-77
debug platform vlan command B-78
debug pm command B-79
debug port-security command B-81
debug qos-manager command B-83
debug rep command B-82
debug spanning-tree bpdu command B-86
debug spanning-tree bpdu-opt command B-87
debug spanning-tree command B-84
debug spanning-tree mstp command B-88
debug spanning-tree switch command B-90
debug sw-vlan command B-92
debug sw-vlan ifs command B-93
debug sw-vlan notification command B-94
debug udld command B-96
debug vqpc command B-98
default policer configuration
NNIs C-26
UNIs C-25
define interface-range command 2-78
delete (boot loader) command A-7
delete command 2-80
deny (ARP access-list configuration) command 2-81
deny (IPv6) command 2-83
deny command 2-88
detect mechanism, causes 2-117
DHCP snooping
accepting untrusted packets from edge switch 2-175
enabling
on a VLAN 2-181
trust on an interface 2-179
error recovery timer 2-119
rate limiting 2-178
DHCP snooping binding database
binding file, configuring 2-171
bindings
adding 2-169
deleting 2-169
displaying 2-488
clearing database agent statistics 2-42
database agent, configuring 2-171
displaying
binding entries 2-488
database agent status 2-490, 2-492
renewing 2-369
diagnostic monitor command 2-91
diagnostic schedule test command 2-93
diagnostic start test command 2-95
differentiated service code point
Digital Optical Monitoring
dir (boot loader) command A-8
directories, deleting 2-80
DoM
displaying supported transceivers 2-479, 2-616, 2-617
domains, CFM 2-317
dot1x default command 2-97
dot1x host-mode command 2-98
dot1x initialize command 2-100
dot1x max-req command 2-101, 2-103
dot1x port-control command 2-104
dot1x re-authenticate command 2-106
dot1x reauthentication command 2-107
dot1x supplicant force-multicast command 2-108
dot1x system-auth-control command 2-109
dot1x test eapol-capable command 2-110
dot1x test timeout command 2-111
dot1x timeout command 2-112
dot1x violation-mode command 2-114
drop eligibility indicator 2-399
drop eligibility indicator bit 2-289
dropping packets, with ACL matches 2-5
drop threshold, Layer 2 protocol tunneling 2-244
DSCP
as match criteria for QoS groups 2-291, 2-297
for QoS traffic marking 2-401
setting in policy maps 2-401
dual IPv4 and IPv6 templates 2-324
dual-purpose uplink ports, selecting the type 2-302
duplex command 2-115
dynamic-access ports
configuring 2-679
restrictions 2-680
dynamic ARP inspection
ARP ACLs
apply to a VLAN 2-155
define 2-17
deny packets 2-81
display 2-416
permit packets 2-322
clear
log buffer 2-40
statistics 2-41
display
ARP ACLs 2-416
configuration and operating state 2-483
log buffer 2-483
statistics 2-483
trust state and rate limit 2-483
enable per VLAN 2-164
error detection for 2-117
error recovery timer 2-119
log buffer
clear 2-40
configure 2-159
display 2-483
rate-limit incoming ARP packets 2-157
statistics
clear 2-41
display 2-483
trusted interface state 2-161
type of packet logged 2-165
validation checks 2-162
Dynamic Host Configuration Protocol (DHCP)
E
EAP-request/identity frame
maximum number to send 2-103
response time before retransmitting 2-112
E-LMI
enabling 2-124
mapping 2-126
environment variables, displaying 2-417
errdisable detect cause command 2-117
errdisable recovery command 2-119
error conditions, displaying 2-449
error disable detection 2-117
error-disabled interfaces, displaying 2-467
EtherChannel
assigning Ethernet interface to channel group 2-30
creating port-channel logical interface 2-144
debug EtherChannel/PAgP, display B-4
debug platform-specific events, display B-44
displaying 2-453
enabling Layer 2 protocol tunneling for
LACP 2-245
PAgP 2-245
UDLD 2-245
interface information, displaying 2-467
LACP
clearing channel-group information 2-47
debug messages, display B-29
displaying 2-521
modes 2-30
port priority for hot-standby ports 2-248
restricting a protocol 2-34
system priority 2-250
load-distribution methods 2-349
PAgP
aggregate-port learner 2-318
clearing channel-group information 2-51
debug messages, display B-36
displaying 2-562
error detection for 2-117
error recovery timer 2-119
learn method 2-318
modes 2-30
physical-port learner 2-318
priority of interface for transmitted traffic 2-320
Ethernet controller, internal register display 2-424
ethernet dot1ad command 2-121
ethernet evc command 2-123
ethernet lmi ce-vlan map command 2-124, 2-126
ethernet lmi command 2-124
ethernet lmi global command 2-124
Ethernet Local Management Interface
ethernet loopback interface configuration command 2-128
ethernet loopback privileged EXEC command 2-131
ethernet oam remote-failure command 2-133
Ethernet service
debugging B-5
displaying 2-458
Ethernet service instance 2-389
Ethernet service interfaces 2-461
Ethernet statistics, collecting 2-385
Ethernet UNI configuration 2-135
ethernet uni id command 2-137
Ethernet virtual connections
EVC configuration mode 2-123
EVCs 2-123
and VLANs 2-135
service instances 2-389
UNI counts 2-727
EVC service
point-to-multipoint 2-727
point-to-point 2-727
exceed-action command 2-138
extended-range VLANs
and allowed VLAN list 2-704
configuring 2-733
extended system ID for STP 2-634
external alarms, configuring 2-7
F
failure logging data
clearing 2-48
copying 2-62
fan information, displaying 2-445
files, deleting 2-80
flash_init (boot loader) command A-10
Flex Links
configuring 2-681
configuring preferred VLAN 2-683
displaying 2-467
flowcontrol command 2-140
format (boot loader) command A-11
forwarding packets, with ACL matches 2-5
forwarding results, display C-8
frame forwarding information, displaying C-8
front-end controller counter and status information C-10
fsck (boot loader) command A-12
G
global configuration mode 1-2, 1-3
H
hardware ACL statistics 2-412
health-monitoring diagnostic testing 2-91
help (boot loader) command A-13
host connection, port configuration 2-687
host ports, private VLANs 2-691
hw-module module logging onboard command 2-142
I
IEEE 802.1ag Connectivity Fault Management
IEEE 802.1Q trunk ports and native VLANs 2-738
IEEE 802.1Q tunnel ports
configuring 2-688
displaying 2-441
limitations 2-689
IEEE 802.1x
and switchport modes 2-689
violation error recovery 2-119
See also port-based authentication
IGMP filters
applying 2-184
debug messages, display B-9
IGMP groups, setting maximum 2-186
IGMP maximum groups, debugging B-10
IGMP profiles
creating 2-188
displaying 2-495
IGMP snooping
adding ports as a static member of a group 2-203
displaying 2-496, 2-500, 2-501
enabling 2-190
enabling the configurable-leave timer 2-192
enabling the Immediate-Leave feature 2-200
flooding query count 2-198
interface topology change notification behavior 2-199
multicast table 2-498
querier 2-194
query solicitation 2-198
report suppression 2-196
switch topology change notification behavior 2-198
images
Immediate-Leave feature, MVR 2-311
immediate-leave processing 2-200
Immediate-Leave processing, IPv6 2-240
input policy maps
and ACL classification 2-286
and aggregate policers 2-339
commands not supported in 2-347
configuration guidelines 2-347
interface command 2-148
interface configuration mode 1-2, 1-4
interface port-channel command 2-144
interface range command 2-146
interface-range macros 2-78
interfaces
assigning Ethernet interface to channel group 2-30
configuring 2-115
configuring multiple 2-146
creating port-channel logical 2-144
debug messages, display B-7
disabling 2-611
displaying the MAC address table 2-544
restarting 2-611
interface speed, configuring 2-672
internal registers, displaying 2-424, 2-431
Internet Group Management Protocol
invalid GBIC
error detection for 2-117
error recovery timer 2-119
ip address command 2-153
IP addresses, setting 2-153
IP address matching 2-284
ip arp inspection filter vlan command 2-155
ip arp inspection limit command 2-157
ip arp inspection log-buffer command 2-159
ip arp inspection trust command 2-161
ip arp inspection validate command 2-162
ip arp inspection vlan command 2-164
ip arp inspection vlan logging command 2-165
IP DHCP snooping
ip dhcp snooping binding command 2-169
ip dhcp snooping command 2-168
ip dhcp snooping database command 2-171
ip dhcp snooping information option allow-untrusted command 2-175
ip dhcp snooping information option command 2-173
ip dhcp snooping information option format remote-id command 2-177
ip dhcp snooping limit rate command 2-178
ip dhcp snooping trust command 2-179
ip dhcp snooping verify command 2-180
ip dhcp snooping vlan command 2-181
ip dhcp snooping vlan information option format-type circuit-id string command 2-182
ip igmp filter command 2-184
ip igmp max-groups command 2-186, 2-213, 2-215
ip igmp profile command 2-188
ip igmp snooping command 2-190
ip igmp snooping last-member-query-interval command 2-192
ip igmp snooping querier command 2-194
ip igmp snooping report-suppression command 2-196
ip igmp snooping tcn command 2-198
ip igmp snooping tcn flood command 2-199
ip igmp snooping vlan immediate-leave command 2-200
ip igmp snooping vlan mrouter command 2-201
ip igmp snooping vlan static command 2-203
IP multicast addresses 2-308
IP precedence, as match criteria for QoS groups 2-293
ip sla responder twamp command 2-205
ip sla server twamp command 2-207
ip source binding command 2-209
IP source guard
disabling 2-217
displaying
binding entries 2-507
configuration 2-508
enabling 2-217
static IP source bindings 2-209
IP source guard, displaying dynamic binding entries 2-488
ip ssh command 2-211
IPv6 access list, deny conditions 2-83
ipv6 access-list command 2-219
ipv6 address dhcp command 2-221
ipv6 dhcp client request vendor command 2-222
ipv6 dhcp ping packets command 2-223
ipv6 dhcp pool command 2-224
ipv6 dhcp server command 2-227
ipv6 mld snooping command 2-229
ipv6 mld snooping last-listener-query count command 2-231
ipv6 mld snooping last-listener-query-interval command 2-233
ipv6 mld snooping listener-message-suppression command 2-235
ipv6 mld snooping robustness-variable command 2-236
ipv6 mld snooping tcn command 2-238
ipv6 mld snooping vlan command 2-240
IPv6 SDM template 2-386
ipv6 traffic-filter command 2-242
ip verify source command 2-217
J
jumbo frames
L
l2protocol-tunnel command 2-244
l2protocol-tunnel cos command 2-247
LACP
lacp port-priority command 2-248
lacp system-priority command 2-250
Layer 2 mode, enabling 2-677
Layer 2 protocol ports, displaying 2-519
Layer 2 protocol-tunnel
error detection for 2-117
error recovery timer 2-119
Layer 2 protocol tunnel counters 2-46
Layer 2 protocol tunneling error recovery 2-246
Layer 2 traceroute
IP addresses 2-720
MAC addresses 2-717
Layer 3 mode, enabling 2-677
line configuration mode 1-2, 1-4
Link Aggregation Control Protocol
link flap
error detection for 2-117
error recovery timer 2-119
link state group command 2-252
link state track command 2-254
load-distribution methods for EtherChannel 2-349
location (global configuration) command 2-255
location (interface configuration) command 2-257
logging event command 2-259
logging file command 2-260
logical interface 2-144
loopback error
detection for 2-117
recovery timer 2-119
loop guard, for spanning tree 2-636, 2-640
M
mac access-group command 2-262
MAC access-groups, displaying 2-534
MAC access list configuration mode 2-264
mac access-list extended command 2-264
MAC access lists 2-88
MAC addresses
disabling MAC address learning per VLAN 2-267
displaying
aging time 2-538
all 2-537
dynamic 2-542
MAC address-table move updates 2-547
notification settings 2-546, 2-548
number of addresses in a VLAN 2-540
per interface 2-544
per VLAN 2-552
static 2-550
static and dynamic entries 2-535
dynamic
aging time 2-266
deleting 2-49
displaying 2-542
enabling MAC address notification 2-271
enabling MAC address-table move update 2-269
matching 2-284
static
adding and removing 2-273
displaying 2-550
dropping on an interface 2-274
tables 2-537
MAC address notification, debugging B-30
mac address-table aging-time 2-262, 2-284
mac address-table aging-time command 2-266
mac address-table learning command 2-267
mac address-table move update command 2-269
mac address-table notification command 2-271
mac address-table static command 2-273
mac address-table static drop command 2-274
macro description command 2-278
macro global command 2-279
macro global description command 2-281
macro name command 2-282
macros
adding a description 2-278
adding a global description 2-281
applying 2-279
creating 2-282
displaying 2-564
specifying parameter values 2-279
tracing 2-279
maintenance end points 2-727
mapping tables, QoS 2-713
maps
class
creating 2-38
VLAN
creating 2-736
defining 2-284
displaying 2-605
match access-group command 2-286
match cos command 2-287
match dot1ad dei command 2-289
match ip dscp command 2-291
match ip precedence command 2-293
match qos-group command 2-295
match vlan command 2-297
maximum transmission unit
mdix auto command 2-300
ME 34000EG-2CS switch policers C-24
ME 3400E-24TS switch policers C-24
ME 3400EG-12CS switch policers C-24
media-type command 2-302
memory (boot loader) command A-14
mgmt_clr (boot loader) command A-15
mgmt_init (boot loader) command A-16, A-17
mkdir (boot loader) command A-18
MLD snooping
configuring queries 2-231, 2-233
configuring topology change notification 2-238
enabling 2-229
MLD snooping on a VLAN, enabling 2-240
mode, MVR 2-308
modes, commands 1-1
monitor session command 2-304
more (boot loader) command A-19
MSTP
displaying 2-586
interoperability 2-57
link type 2-638
MST region
aborting changes 2-644
applying changes 2-644
configuration name 2-644
configuration revision number 2-645
current or pending display 2-645
displaying 2-586
MST configuration mode 2-644
VLANs-to-instance mapping 2-644
path cost 2-646
protocol mode 2-642
restart protocol migration process 2-57
root port
loop guard 2-636
preventing from becoming designated 2-636
restricting which can be root 2-636
root guard 2-636
root switch
affects of extended system ID 2-634
interval between BDPU messages 2-651
interval between hello BPDU messages 2-649, 2-660
max-age 2-651
maximum hop count before discarding BPDU 2-653
port priority for selection of 2-655
primary or secondary 2-660
switch priority 2-658
state changes
blocking to forwarding state 2-667
enabling BPDU filtering 2-626, 2-664
enabling BPDU guard 2-628, 2-664
enabling Port Fast 2-664, 2-667
forward-delay time 2-648
length of listening and learning states 2-648
rapid transition to forwarding 2-638
shutting down Port Fast-enabled ports 2-664
state information display 2-585
MTU
configuring size 2-710
displaying global setting 2-593
multicast group address, MVR 2-311
multicast groups, MVR 2-309
Multicast Listener Discovery
multicast router learning method 2-201
multicast router ports, configuring 2-201
multicast router ports, IPv6 2-240
multicast storm control 2-674
multicast VLAN, MVR 2-309
multicast VLAN registration
multiple hosts on authorized port 2-98
Multiple Spanning Tree Protocol
multiplexing, UNI 2-135
MVR
and address aliasing 2-309
configuring 2-308
configuring interfaces 2-311
debug messages, display B-34
displaying 2-556
displaying interface information 2-558
members, displaying 2-560
mvr (global configuration) command 2-308
mvr (interface configuration) command 2-311
mvr vlan group command 2-312
N
native VLANs 2-704
native VLAN tagging 2-738
network node interface 2-351
no authentication logging verbose 2-314
no dot1x logging verbose 2-315
no mab logging verbose 2-316
nonegotiate, speed 2-672, 2-673
non-IP protocols
denying 2-88
forwarding 2-329
non-IP traffic access lists 2-264
non-IP traffic forwarding
denying 2-88
permitting 2-329
normal-range VLANs 2-733
no vlan command 2-733
O
OAM PDUs 2-133
OAM protocol 2-317
oam protocol cfm svlan command 2-317
on-board failure logging, displaying 2-530
on-board failure logging, enabling 2-142
online diagnostics
enabling
scheduling 2-93
global configuration mode
clearing test-based testing schedule 2-93
setting test-based testing 2-93
setting up test-based testing 2-93
removing scheduling 2-93
scheduled switchover
disabling 2-93
enabling 2-93
setting test interval 2-93
starting testing 2-95
online diagnostic tests, displaying results 2-437
online diagnostic tests, starting 2-95
operation, administration, and maintenance protocol
output policy maps
and QoS group classification 2-295
and traffic shaping 2-410
commands not supported in 2-347
configuration guidelines 2-347
priority in 2-356
queue limit in 2-363
P
PAgP
pagp learn-method command 2-318
pagp port-priority command 2-320
parent policy maps 2-395
password-recovery mechanism, enabling and disabling 2-391
permit (ARP access-list configuration) command 2-322
permit (IPv6) command 2-324
permit command 2-329
per-VLAN spanning-tree plus
physical-port learner 2-318
PID, displaying 2-482
PIM-DVMRP, as multicast router learning method 2-201
police
multiple conform actions for a class 2-60
multiple exceed actions for a class 2-138
multiple violate actions for a class 2-731
with priority 2-332
police aggregate command 2-342
police command 2-332
policer aggregate command 2-337
policer configuration
default for NNIs C-26
default for UNIs C-25
policer cpu uni command 2-344
policers
for CPU protection 2-344
individual 2-332
policy-map class, configuring multiple actions 2-60, 2-138, 2-731
policy-map class configuration mode 2-36
policy-map class police configuration mode 2-60, 2-335
policy-map command 2-346
policy-map configuration mode 2-346
policy maps
and CoS classification 2-287
and DSCP classification 2-291
and IP precedence classification 2-293
and policing 2-335
applying 2-393
applying to an interface 2-347, 2-393, 2-407
child 2-395
creating 2-346
displaying 2-570
hierarchical 2-395
parent 2-395
policers
for a single class 2-332
for multiple classes 2-337, 2-342, 2-344, 2-395
setting priority 2-355
setting QoS group identifier 2-405
traffic classification, defining 2-36
traffic marking
setting CoS values 2-397
setting DSCP values 2-399, 2-401
setting IP precedence values 2-403
Port Aggregation Protocol
port-based authentication
AAA method list 2-3
configuring violation modes 2-114
debug messages, display B-3
enabling 802.1x
globally 2-109
per interface 2-104
host modes 2-98
IEEE 802.1x AAA accounting methods 2-1
initialize an interface 2-100, 2-111
manual control of authorization state 2-104
multiple hosts on authorized port 2-98
periodic re-authentication
enabling 2-107
time between attempts 2-112
quiet period between failed authentication exchanges 2-112
re-authenticating 802.1x-enabled ports 2-106
resetting configurable 802.1x parameters 2-97
switch-to-authentication server retransmission time 2-112
switch-to-client frame-retransmission number2-101to 2-103
switch-to-client retransmission time 2-112
test for IEEE 802.1x readiness 2-110
port-channel load-balance command 2-349
Port Fast, for spanning tree 2-667
port ranges, defining 2-48, 2-62, 2-78
ports, debugging B-79
ports, protected 2-702
port security
aging 2-698
debug messages, display B-81
enabling 2-694
violation error recovery 2-119
port shaping 2-411
port-type command 2-351
port types, MVR 2-311
power information, displaying 2-445
power-supply alarm indications, configuring 2-353
power-supply dual command 2-353
power-supply status, displaying 2-445
precedence
for QoS traffic marking 2-403
setting in policy maps 2-403
priority command 2-355
priority queuing, QoS 2-355
priority with police, QoS 2-355
private-vlan command 2-358
private-vlan mapping command 2-361
private VLANs
association 2-700
configuring 2-358
configuring ports 2-691
displaying 2-600
host ports 2-691
mapping
configuring 2-700
displaying 2-467
promiscuous ports 2-691
product identification information, displaying 2-482
promiscuous ports, private VLANs 2-691
PVST+
Q
QoS
aggregate policers
applying 2-342
creating 2-337
displaying 2-566
class maps
creating 2-38
defining the match criteria 2-287, 2-289
displaying 2-421
conform actions, configuring 2-61
displaying statistics for 2-570, C-33
exceed actions, configuring 2-139
policy maps
applying an aggregate policer 2-337, 2-342, 2-344, 2-395
applying to an interface 2-393, 2-407
creating 2-346
defining policers 2-332
displaying policy maps 2-570
setting CoS values 2-397
setting DSCP values 2-399, 2-401
setting IP precedence values 2-403
setting QoS group identifier 2-405
traffic classifications 2-36
table maps
configuring 2-713
displaying 2-594
violate actions, configuring 2-732
QoS groups
as match criteria 2-295
for QoS traffic classification 2-405
setting in policy maps 2-405
QoS match criteria
ACLs 2-286
CoS value 2-287
precedence value 2-293
QoS group number 2-295
quality of service
querytime, MVR 2-308
queue-limit command 2-363
R
rapid per-VLAN spanning-tree plus
rapid PVST+
re-authenticating 802.1x-enabled ports 2-106
re-authentication
periodic 2-107
time between attempts 2-112
receiver ports, MVR 2-311
receiving flow-control packets 2-140
recovery mechanism
causes 2-119
timer interval 2-120
remote-span command 2-367
Remote Switched Port Analyzer
rename (boot loader) command A-20
renew ip dhcp snooping database command 2-369
rep admin vlan command 2-370
rep block port command 2-371
rep lsl-age-timer command 2-375
rep preempt delay command 2-377
rep preempt segment command 2-379
rep segment command 2-380
rep stcn command 2-383
reset (boot loader) command A-21
resource templates, displaying 2-583
rmdir (boot loader) command A-22
rmon collection stats command 2-385
root guard, for spanning tree 2-636
routed ports
IP addresses on 2-154
number supported 2-154
RSPAN
configuring 2-304
displaying 2-554
filter RSPAN traffic 2-304
remote-span command 2-367
sessions
add interfaces to 2-304
displaying 2-554
start new 2-304
S
scheduled switchover
disabling 2-93
enabling 2-93
scheduling diagnostic tests 2-93
sdm prefer command 2-386
SDM templates
allowed resources 2-387
displaying 2-583
dual IPv4 and IPv6 2-386
secure ports, limitations 2-696
sending flow-control packets 2-140
service instance command 2-389
service instances, displaying 2-459
service password-recovery command 2-391
service policy (policy-map class configuration) command 2-395
service-policy interface configuration command 2-393
service-policy policy-map class configuration command 2-395
set (boot loader) command A-23
set cos command 2-397
set dot1ad dei command 2-399
set dscp command 2-401
set precedence command 2-403
set qos-group command 2-405
setup command 2-407
SFPs, displaying information about 2-482
shape average command 2-410
show access-lists command 2-412
show aggregate-policer command 2-593
show archive status command 2-415
show arp access-list command 2-416
show boot command 2-417
show class-map command 2-421
show controllers cpu-interface command 2-422
show controllers ethernet-controller command 2-424
show controllers tcam command 2-431
show controllers utilization command 2-433
show controller utilization command 2-433
show cpu traffic qos command 2-435
show diagnostic command 2-437
show dot1q-tunnel command 2-441
show dot1x command 2-442
show env command 2-445
show errdisable detect command 2-447
show errdisable flap-values command 2-449
show errdisable recovery command 2-451
show etherchannel command 2-453
show ethernet loopback command 2-456
show ethernet service evc command 2-458
show ethernet service instance command 2-459
show ethernet service interface command 2-461
show flowcontrol command 2-463
show idprom command 2-465
show interface rep command 2-477
show interfaces command 2-467
show interfaces counters command 2-475
show interfaces rep command 2-477
show interface transceivers command 2-479
show inventory command 2-482
show ip arp inspection command 2-483
show ipc command 2-510
show ip dhcp snooping binding command 2-488
show ip dhcp snooping command 2-487
show ip dhcp snooping database command 2-490, 2-492
show ip igmp profile command 2-495
show ip igmp snooping command 2-496
show ip igmp snooping command querier detail 2-501
show ip igmp snooping groups command 2-498
show ip igmp snooping mrouter command 2-500
show ip igmp snooping querier command 2-501
show ip igmp snooping querier detail command 2-501
show ip sla standards command 2-503
show ip sla twamp connection 2-435
show ip sla twamp connection command 2-504
show ip sla twamp session command 2-506
show ip source binding command 2-507
show ipv6 access-list command 2-514
show ipv6 dhcp conflict command 2-516
show ipv6 route updated command 2-517
show ip verify source command 2-508
show l2protocol-tunnel command 2-519
show lacp command 2-521
show link state group command 2-525
show location command 2-527
show logging onboard command 2-530
show mac access-group command 2-534
show mac address-table address command 2-537
show mac address-table aging time command 2-538
show mac address-table command 2-535
show mac address-table count command 2-540
show mac address-table dynamic command 2-542
show mac address-table interface command 2-544
show mac address-table learning command 2-546
show mac address-table move update command 2-547
show mac address-table notification command 2-50, 2-548, B-32
show mac address-table static command 2-550
show mac address-table vlan command 2-552
show monitor command 2-554
show mvr command 2-556
show mvr interface command 2-558
show mvr members command 2-560
show pagp command 2-562
show parser macro command 2-564
show platform acl command C-2
show platform backup interface command C-3
show platform cfm command C-4
show platform configuration command C-5
show platform dl command C-6
show platform etherchannel command C-7
show platform forward command C-8
show platform frontend-controller command C-10
show platform igmp snooping command C-11
show platform ipc trace command C-14
show platform ip multicast command C-12
show platform ip unicast command C-13
show platform ipv6 unicast command C-15
show platform l2pt dm command C-17
show platform layer4op command C-18, C-40
show platform mac-address-table command C-19
show platform messaging command C-20
show platform monitor command C-21
show platform mvr table command C-22
show platform pm command C-23
show platform policer cpu command C-24
show platform port-asic command C-28
show platform port-security command C-32
show platform qos command C-33
show platform resource-manager command C-36
show platform snmp counters command C-38
show platform spanning-tree synchronization command C-39
show platform stp-instance command C-41
show platform tcam command C-42
show platform vlan command C-44
show platform vlan mapping command C-45
show policer aggregate command 2-566
show policer cpu uni-eni command 2-567
show policy-map command 2-570
show policy-map interface output fields 2-573
show port security command 2-575
show port-type command 2-578
show rep topology command 2-580
show sdm prefer command 2-583
show spanning-tree command 2-585
show storm-control command 2-591
show system mtu command 2-593
show udld command 2-595
show version command 2-598
show vlan access-map command 2-605
show vlan command 2-600
show vlan command, fields 2-602
show vlan filter command 2-606
show vlan mapping command 2-607
show vmps command 2-609
shutdown command 2-611
shutdown threshold, Layer 2 protocol tunneling 2-244
shutdown vlan command 2-612
SNMP host, specifying 2-618
SNMP informs, enabling the sending of 2-614
snmp mib rep trap-rate command 2-613
snmp-server enable traps command 2-614
snmp-server host command 2-618
snmp trap mac-notification change command 2-622
SNMP traps
enabling MAC address notification trap 2-622
enabling the MAC address notification feature 2-271
enabling the sending of 2-614
software images
deleting 2-80
downloading 2-9
upgrading 2-9
uploading 2-15
software version, displaying 2-598
source ports, MVR 2-311
SPAN
configuring 2-304
debug messages, display B-33
displaying 2-554
filter SPAN traffic 2-304
sessions
add interfaces to 2-304
displaying 2-554
start new 2-304
spanning-tree bpdufilter command 2-624, 2-626
spanning-tree bpduguard command 2-628
spanning-tree cost command 2-630
spanning-tree etherchannel command 2-632
spanning-tree extend system-id command 2-634
spanning-tree guard command 2-636
spanning-tree link-type command 2-638
spanning-tree loopguard default command 2-640
spanning-tree mode command 2-642
spanning-tree mst configuration command 2-644
spanning-tree mst cost command 2-646
spanning-tree mst forward-time command 2-648
spanning-tree mst hello-time command 2-649
spanning-tree mst max-age command 2-651
spanning-tree mst max-hops command 2-653
spanning-tree mst port-priority command 2-655
spanning-tree mst pre-standard command 2-657
spanning-tree mst priority command 2-658
spanning-tree mst root command 2-660
spanning-tree portfast (global configuration) command 2-664
spanning-tree portfast (interface configuration) command 2-667
spanning-tree port-priority command 2-662
Spanning Tree Protocol
spanning-tree vlan command 2-669
speed command 2-672
SSH, configuring version 2-211
static-access ports, configuring 2-679
statistics, Ethernet group 2-385
sticky learning, enabling 2-694
storm-control command 2-674
STP
counters, clearing 2-56
debug messages, display
MSTP B-88
optimized BPDUs handling B-87
spanning-tree activity B-84
switch shim B-90
transmitted and received BPDUs B-86
enabling on ENIs 2-624
enabling protocol tunneling for 2-244
EtherChannel misconfiguration 2-632
extended system ID 2-634
path cost 2-630
protocol modes 2-642
root port
loop guard 2-636
preventing from becoming designated 2-636
restricting which can be root 2-636
root guard 2-636
root switch
affects of extended system ID 2-634, 2-670
hello-time 2-669
interval between BDPU messages 2-669
interval between hello BPDU messages 2-669
max-age 2-669
port priority for selection of 2-662
primary or secondary 2-669
switch priority 2-669
state changes
blocking to forwarding state 2-667
enabling BPDU filtering 2-626, 2-664
enabling BPDU guard 2-628, 2-664
enabling Port Fast 2-664, 2-667
enabling timer to recover from error state 2-119
forward-delay time 2-669
length of listening and learning states 2-669
shutting down Port Fast-enabled ports 2-664
state information display 2-585
SVIs, creating 2-148
Switched Port Analyzer
switching characteristics
modifying 2-677
returning to interfaces 2-677
switchport access command 2-679
switchport backup interface command 2-681
switchport block command 2-685
switchport command 2-677
switchport host command 2-687
switchport mode command 2-688
switchport mode private-vlan command 2-691
switchport port-security aging command 2-698
switchport port-security command 2-694
switchport private-vlan command 2-700
switchport protected command 2-702
switchports, displaying 2-467
switchport trunk command 2-704
switchport vlan mapping command 2-706
system env temperature threshold yellow command 2-709
system message logging, save message to flash 2-260
system mtu command 2-710
system resource templates 2-386
T
table-map command 2-713
table-map configuration mode 2-713
table maps
configuring 2-713
displaying 2-594
QoS 2-713
tar files, creating, listing, and extracting 2-12
TDR, running 2-715
temperature information, displaying 2-445
temperature status, displaying 2-445
templates, system resources 2-386
test cable-diagnostics tdr command 2-715
traceroute mac command 2-717
traceroute mac ip command 2-720
traffic shaping, QoS 2-410
trunking, VLAN mode 2-688
trunk mode 2-688
trunk ports 2-688
tunnel ports, Layer 2 protocol, displaying 2-519
type (boot loader) command A-26
U
UDLD
debug messages, display B-96
enable globally 2-722
enable per interface 2-724
error recovery timer 2-119
message timer 2-722
reset a shutdown interface 2-726
status 2-595
udld command 2-722
udld port command 2-724
udld reset command 2-726
UNI
bundling and multiplexing 2-135
Ethernet 2-135
unicast storm control 2-674
uni count command 2-727
UniDirectional Link Detection
UNI ID, Ethernet 2-137
uni-vlan command 2-729
unknown multicast traffic, preventing 2-685
unknown unicast traffic, preventing 2-685
unset (boot loader) command A-27
upgrading
software images 2-9
monitoring status of 2-415
user EXEC mode 1-2
user network interface 2-351
V
version (boot loader) command A-29
violate-action command 2-731
vlan access-map command 2-736
VLAN access map configuration mode 2-736
VLAN access maps
actions 2-5
displaying 2-605
vlan command 2-733
VLAN configuration mode
commands 2-733
description 1-4
entering 2-733
summary 1-2
vlan dot1q tag native command 2-738
vlan filter command 2-740
VLAN filters, displaying 2-606
VLAN ID range 2-733
VLAN ID translation
VLAN mapping
configuring 2-706
described 2-707
displaying 2-607
VLAN maps
applying 2-740
creating 2-736
defining 2-284
displaying 2-605
VLAN Query Protocol
VLANs
adding 2-733
configuring 2-733
debug messages, display
activation of B-94
VLAN IOS file system error tests B-93
VLAN manager activity B-92
displaying configurations 2-600
extended-range 2-733
MAC addresses
displaying 2-552
number of 2-540
normal-range 2-733
private 2-691
configuring 2-358
displaying 2-600
restarting 2-612
saving the configuration 2-733
shutting down 2-612
suspending 2-612
VMPS
configuring servers 2-745
displaying 2-609
error recovery timer 2-120
reconfirming dynamic VLAN assignments 2-742
vmps reconfirm (global configuration) command 2-743
vmps reconfirm (privileged EXEC) command 2-742
vmps retry command 2-744
vmps server command 2-745
VQP
and dynamic-access ports 2-680
clearing client statistics 2-59
displaying information 2-609
per-server retry count 2-744
reconfirmation interval 2-743
reconfirming dynamic VLAN assignments 2-742
VTP
enabling
tunneling for 2-244
W
Weighted Tail Drop
WTD, queue-limit command 2-363
Feedback