Step 1 | configure terminal
Example:DomainMember# configure terminal
| Enters the global configuration mode.
|
Step 2 | energywise importance importance
Example:DomainMember(config)#energywise importance 65
| Sets the importance.
The range is from 1 to 100. The default is 1.
|
Step 3 | energywise keywords word, word, word...
Example:DomainMember(config)# energywise keywords lab1,devlab
| Assigns at least one keyword.
When assigning multiple keywords, separate the keywords with commas, and do not use spaces between keywords.
You can enter alphanumeric characters and symbols such as #, (, $, !, and &.
Do not enter an asterisk (*) or a space between the characters or symbols.
By default, keywords are not defined.
|
Step 4 | service password-encryption
Example:DomainMember(config)# service password-encryption
| (Optional) Enables password encryption.
If you set a hidden password in Step 3, enter this command.
|
Step 5 | energywise management security shared-secret [ 0 | 7] mgmt-password [port tcp-port-number]
Example:DomainMember(config)# energywise management security shared-secret cisco port 1055
| Sets the management password on the domain member that the management station uses to communicate with the domain.
(Optional) 0—Uses a plain-text password.
(Optional) 7—Uses a hidden password.
If you do not enter 0 or 7, the default is 0.
For the mgmt-password:
You can enter alphanumeric characters and symbols such as #, (, $, !, and &.
Do not enter an asterisk (*) or a space between the characters or symbols.
(Optional) port tcp-port-number—Specifies the TCP port for management access. The range is from 1025 to 65535. The default is 43440.
By default, the management password is not set.
|
Step 6 | energywise name name
Example:DomainMember(config)# energywise name LabSwitch
| Specifies the EnergyWise-specific name.
You can enter alphanumeric characters and symbols such as #, (, $, !, and &.
Do not enter an asterisk (*) or a space between the characters or symbols.
The default is the host name.
|
Step 7 | energywise neighbor [ hostname | ip-address ] udp-port-number
Example:DomainMember(config)# energywise neighbor member1 43440
| Assigns a static neighbor.
Domain Name System (DNS) hostname (hostname) or IP address (ip-address).
UDP port (udp-port-number) that sends and receives queries.
The range is from 1 to 65000.
By default, static neighbors are not assigned.
|
Step 8 | energywise role role
Example:DomainMember(config)# energywise role role.labaccess
| Specifies the role in the EnergyWise domain. For example, lobby.b20.
You can enter alphanumeric characters and symbols such as #, (, $, !, and &.
Do not enter an asterisk (*) or a space between the characters or symbols.
The default is the model number.
|
Step 9 | energywise allow query [save | set]
Example:DomainMember(config)# energywise allow query save
| Configures the domain member to respond to queries from the management station or another domain member.
By default, the domain member responds to the set query.
|
Step 10 | energywise endpoint security [ none | shared-secret [ 0 | 7 ] shared-secret]
Example:DomainMember(config)# energywise endpoint security shared-secret cisco
| Sets the security mode for an endpoint.
none—Disables security.
shared-secret—Uses a password for secure communication with the domain member.
(Optional) 0—Uses a plain-text password.
(Optional) 7—Uses a hidden password.
If you do not enter 0 or 7, the default is 0.
For the shared-secret:
You can enter alphanumeric characters and symbols such as #, (, $, !, and &.
Do not enter an asterisk (*) or a space between the characters or symbols.
By default, the password is not set.
|
Step 11 | end
Example:DomainMember(config)# end
| Returns to privileged EXEC mode.
|
Step 12 | show energywise
Example:DomainMember# show energywise
| Verifies your entries
|
Step 13 | show energywise domain
Example:DomainMember# show energywise domain
| Verifies your entries.
|
Step 14 | copy running-config startup-config
Example:DomainMember# copy running-config startup-config
| (Optional) Saves your entries in the configuration file.
|