Cisco Nexus 9000 Series NX-OS Fundamentals Configuration Guide, Release 9.3(x)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: March 8, 2022

New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 9000 Series NX-OS Fundamentals Configuration Guide Release 9.3(x).

New and Changed Information

Table 1. New and Changed Features for Cisco NX-OS Release 9.3(x)
Feature	Description	Changed in Release	Where Documented
DHCP offer option	Added auto provisioning support for option 53 even when it is not the first packet.	9.3(9)	Guidelines and Limitations for POAP
Erase Configuration	Added support for preserving the IPv6 address on mgmt 0 interface and the IPv6 Default Gateway in Management VRF after write erase, reload operation.	9.3(2)	Erasing a Configuration
No new features for this release		9.3(1)

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)