Cisco Nexus 9000 Series NX-OS Fundamentals Configuration Guide, Release 9.2(x)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: May 15, 2020

New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 9000 Series NX-OS Fundamentals Guide, Release 9.x.

New and Changed Information

Table 1. New and Changed Features for Cisco NX-OS Release 9.2(x)
Feature	Description	Changed in Release	Where Documented
Network Plug and Play support	Added support for Network Plug and Play.	9.2(3)	Using Network Plug and Play
system no poap command	Added support to disable POAP.	9.2(2)	Disabling POAP
POAP over IPv6 support	Added support for POAP over IPv6.	9.2(2)	Guidelines and Limitations for POAP
show time-stamp running-config last-changed command	Added support to display the time-stamp when the running configuration was last changed.	9.2(1)	Verifying the Device Configuration

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)