diagnostics (GOLD) define a common framework for diagnostic operations across
Cisco platforms. The GOLD implementation checks the health of hardware
components and verifies proper operation of the system data and control planes.
Some tests take effect when the system is booting up; other tests take effect
when the system is operational. A booting module goes through a series of
checks before coming online to allow the system to detect faults in the
hardware components at bootup and to ensure that a failing module is not
introduced in a live network.
Defects are also
diagnosed during system operation or runtime. You can configure a series of
diagnostic checks to determine the condition of an online system. You must
distinguish between disruptive and nondisruptive diagnostic tests. Although
nondisruptive tests occur in the background and do not affect the system data
or control planes, disruptive tests do affect live packet flows. You should
schedule disruptive tests during special maintenance windows. The
show diagnostic content
displays test attributes such as disruptive or nondisruptive tests.
You can configure
runtime diagnostic checks to run at a specific time or to run continually in
diagnostic tests are nondisruptive, and they run in the background while the
system is in operation. The role of online diagnostic health monitoring is to
proactively detect hardware failures in the live network environment and inform
you of a failure.
diagnostic results and detailed statistics for all tests including the last
execution time, the first and last test pass time, the first and last test
failure time, the total run count, the total failure count, the consecutive
failure count, and the error code. These test results help administrators
determine the condition of a system and understand the reason for a system
failure. Use the
result command to
view diagnostic results.
For more information
about configuring GOLD, see the
Cisco Nexus 9000
Series NX-OS System Management Configuration Guide.