Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 7.0(3)I4(1)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: October 27, 2017

W Commands

show wred-queue qos-group-map

Syntax Description


show	Show running system information
wred-queue	Show WRED qos-group information
qos-group-map	Display mapping of the qos-group information

Command Mode

/exec

show wrr-queue qos-group-map

Syntax Description


show	Show running system information
wrr-queue	Display mapping of traffic priority (CoS) values to L3 Multicast
qos-group-map	Show wrr-queue qos-group-map

Command Mode

/exec

show wrr unicast-bandwidth

Syntax Description


show	Show running system information
wrr	unicast bandwidth configuration
unicast-bandwidth	rate in precentage of data rate

Command Mode

/exec

show wwn interface

show wwn interface <if0>

Syntax Description


show	Show running system information
wwn	show wwn information
interface	Show interface WWN
if0

Command Mode

/exec

show wwn status

show wwn status [ { backplane-prom | block-id <i0> | non-volatile-pss | volatile-pss } ]

Syntax Description


show	Show running system information
wwn	show wwn information
status	Show overall WWN Usage and Alarm Status
backplane-prom	(Optional) Show WWN block in backplane PROM
block-id	(Optional) Enter a block id.
i0	(Optional) Enter a block id.
non-volatile-pss	(Optional) Show contents of non-volatile PSS
volatile-pss	(Optional) Show contents of volatile PSS

Command Mode

/exec

show wwn switch

Syntax Description


show	Show running system information
wwn	show wwn information
switch	Show switch WWN

Command Mode

/exec

show wwn vsan-wwn

Syntax Description


show	Show running system information
wwn	show wwn information
vsan-wwn	Show all user configured vsan wwn

Command Mode

/exec

show wwn vsan

show wwn vsan <i0>

Syntax Description


show	Show running system information
wwn	show wwn information
vsan	Show vsan WWN
i0

Command Mode

/exec

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)