Accessory Kits

Accessory Kit Contents

The following table lists and illustrates the contents for the accessory kit (N9K-C9504-ACK).

Illustration Description Quantity

Rack-Mount Kit (N9K-C9504-RMK)

  • 12-24 x 3/4-in. Phillips screws (24)

  • M6 x 19 mm Phillips screws (24)

  • Adjustable bottom-support rails (2)

1 kit

RJ-45 rollover cable

1

DB-9F/RJ-45F PC terminal

1

Ground lug kit

  • Two-hole lug (1)

  • M4 x 8-mm Phillips pan-head screws (2)

1 kit

Cable tie, 8.5 inches (10)

1

ESD wrist strap (disposable)

1

Not applicable

Hazardous substances list for customers in China

1

Not applicable

Cisco Information Packet

1

Not applicable

1-Year Limited Warranty for Hardware

1


Note

If you do not receive a part listed in this document, contact Cisco Technical Support at this URL: http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml.

If you purchased this product through a Cisco reseller, you might receive additional contents in your kit, such as documentation, hardware, and power cables.

The product shipment includes a power cord for each 3-kW AC power supply. You must supply a 6 AWG cable for up to 45 A.

The shipped cables depend on your specification when placing an order. The available power cords for the 3-kW AC power supplies are as follows:

  • CAB-AC-16A-AUS—power cord, 250-VAC 16A, C19, Australia

  • CAB-AC-16A-CH—power cord, 16-A, China

  • CAB-AC-2500W-EU—power cord, 250-VAC 16A, Europe

  • CAB-AC-2500W-INT—power cord, 250-VAC 16A, International

  • CAB-AC-2500W-ISRL—power cord, 250-VAC 16-A, Israel

  • CAB-AC-2500W-US1—power cord, 250-VAC 16A, straight-blade NEMA 6

  • CAB-AC-C6K-TWLK—power cord, 250-VAC 16A, twist lock, NEMA L6-20

  • CAB-C19-CBN—cabinet jumper power cord, 250-VAC, 16A, C20C

  • CAB-ACS-16—power cord, 16-A, Switzerland

  • CAB-L520P-C19-US—NEMA L5-20 to IEC-C19, 6 ft, US