System Specifications

Environmental Specifications

Environment

Specification

Temperature

Ambient operating temperature

32 to 104°F (0 to 40°C)

Ambient nonoperating

–40 to 158°F (–40 to 70°C)

Relative humidity

Ambient (noncondensing)

5 to 95%

Altitude

Operating

0 to 13,123 feet (0 to 4,000 meters)

Switch Dimensions

Switch Component

Width

Depth

Height

Cisco Nexus 9396PX chassis

17.5 inches (44.5 cm)

22.5 inches (57.1 cm)

3.5 inches (8.9 cm) (2 RU)

Switch and Module Weights and Quantities

Component

Weight per Unit

Quantity

Cisco Nexus 9396PX Chassis (N9K-C9396PX)

22.45 lb (10.2 kg)

1

Uplink Module

– M4PC

– M6PQ

– M12PQ

3.4 lb (1.5 kg)

2.0 lb (0.9 kg)

3.12 lb (1.4 kg)

1

Fan Modules (fan modules currently shipped with the switch)

– Port-side exhaust (blue stripe) fan module (N9K-C9300-FAN2-B)

– Port-side intake (burgundy stripe) fan tray (N9K-C9300-FAN2)

3 (2 for operations and 1 for redundancy)

1.14 lb (0.5 kg)

1.14 lb (0.5 kg)

Fan Modules (fan modules previously shipped with the switch)

– Port-side exhaust (blue stripe) fan module (N9K-C9300-FAN1-B)

– Port-side intake (burgundy stripe) fan module (N9K-C9300-FAN1)

3 (2 for operations and 1 for redundancy)

0.92 lb (0.4 kg)

0.92 lb (0.4 kg)

Power Supplies

– 650-W AC port-side exhaust (blue latch) power supply module (N9K-PAC-650W-B)

– 650-W AC port-side intake (burgundy latch) power supply module (N9K-PAC-650W)

– 930-W DC port-side intake (green latch) power supply (UCSC-PSU-930WDC)

2 (1 for operations and one for redundancy)

2.64 lb (1.2 kg)

2.64 lb (1.2 kg)

2.39 lb (1.1 kg)

Transceiver and Cable Specifications

To determine which transceivers and cables are supported by this switch, see http:/​/​www.cisco.com/​c/​en/​us/​support/​interfaces-modules/​transceiver-modules/​products-device-support-tables-list.html.

To see the transceiver specifications and installation information, see http:/​/​www.cisco.com/​c/​en/​us/​support/​interfaces-modules/​transceiver-modules/​products-installation-guides-list.html.

Power Input Requirements

The following table lists the typical amount of power consumed by the switch, and it lists the maximum amount of power that you must provision from the power source as input to the power supply and switch for peak conditions.

Table 1 Switch Power Input Requirements
Typical Power Consumption Maximum Power Consumption

Cisco Nexus 9396PX

232 W

455 W

Power Cord Specifications

If you are using a DC power supply, we recommend using a 8 AWG insulated cable (10 AWG minimum) customer-supplied cable to wire each power supply to its power source and the earth ground. If you are using an AC power supply, see the following table for the power cord specifications.
Table 2 AC Power Cord Specifications
Locale Power Cord Part Number Cord Set Description

CAB-C13-C14-2M

Power Cord Jumper, C13-C14 Connectors, 6.6 feet (2.0 m)

CAB-C13-C14-AC

Power cord, C13 to C14 (recessed receptacle), 10 A, 9.8 feet (3 m)

CAB-C13-CBN

Cabinet jumper power cord, 250 VAC, 10 A, C14-C13 connectors, 2.3 feet (0.7 m)

Argentina

CAB-250V-10A-AR

250 V, 10 A, 8.2 feet (2.5 m)

Australia

CAB-9K10A-AU

250 VAC, 10 A, 3112 plug, 8.2 feet (2.5 m)

Brazil

CAB-250V-10A-BR

250 V, 10 A, 6.9 feet (2.1 m)

European Union

CAB-9K10A-EU

250 VAC, 10 A, CEE 7/7 plug, 8.2 feet (2.5 m)

India

CAB-IND-10A

10 A, 8.2 feet (2.5 m)

Israel

CAB-250V-10A-IS

250 V, 10 A, 8.2 feet (2.5 m)

Italy

CAB-9K10A-IT

250 VAC, 10 A, CEI 23-16/VII plug, 8.2 feet (2.5 m)

North America

CAB-9K12A-NA

125 VAC, 13 A, NEMA 5-15 plug, 8.2 feet (2.5 m)

North America

CAB-AC-L620-C13

NEMA L6-20-C13, 6.6 feet (2.0 m)

North America

CAB-N5K6A-NA

200/240V, 6A, 8.2 feet (2.5 m)

Peoples Republic of China

CAB-250V-10A-CN

250 V, 10 A, 8.2 feet (2.5 m)

South Africa

CAB-250V-10A-ID

250 V, 10 A, 8.2 feet (2.5 m)

Switzerland

CAB-9K10A-SW

250 VAC, 10 A, MP232 plug, 8.2 feet (2.5 m)

United Kingdom

CAB-9K10A-UK

250 VAC, 10 A, BS1363 plug (13 A fuse), 8.2 (2.5 m)