The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
To enable the Catena feature, use the feature catena command. To disable this feature, use the no form of this command.
feature catena
no feature catena
This command has no arguments or keywords.
The Catena feature is disabled.
Configuration mode (config)
Release |
Modification |
---|---|
Cisco NX-OS 8.0(1) |
This command was introduced. |
Catena must be configured before using this command. For more information about these task, see "Cisco Nexus 7000 Series Switches Configuration Guide: The Catena Solution."
The following example shows how to enable Catena:
switch# configure terminal switch(config)# feature catena
Command |
Description |
---|---|
Displays the status and configuration for the specified Catena instance. |
|
Displays the running Catena configuration. |