The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This document describes the configuration details for Cisco NX-OS unicast routing in Cisco Nexus 6000 Series switches switches.
This chapter includes the following sections:
To use this guide, you must be familiar with IP and routing technology.
This document is organized into the following chapters:
|
|
---|---|
Presents an overview of unicast routing and brief descriptions of each feature. |
|
Describes how to configure and manage IPv4, including ARP and ICMP. |
|
Describes how to configure and manage IPv6, including ARP and ICMP. |
|
Describes how to configure the OSPFv2 routing protocol for IPv4 networks. |
|
Describes how to configure the OSPFv3 routing protocol for IPv6 networks. |
|
Describes how to configure the Cisco EIGRP routing protocol for IPv4 networks. |
|
Describes how to configure basic features for the BGP routing protocol for IPv4 networks. |
|
Describes how to configure advanced features for the BGP routing protocol for IPv4 networks, including route redistribution and route aggregation. |
|
Describes how to configure the RIP routing protocols for IPv4 networks. |
|
Describes how to configure static routing for IPv4 networks. |
|
Describes how to configure the Route Policy Manager, including IP prefix lists and route maps for filtering and redistribution. |
|
Describes how to configure Policy-Based Routing and includes guidelines, limitations, and examples. |
|
Describes how to configure the Hot Standby Routing Protocol. |
|
Describes how to configure the Virtual Router Redundancy Protocol. |
|
Appendix 1, “IETF RFCs supported by Cisco NX-OS Unicast Features, Release 6.x” |
Note As part of our constant endeavor to remodel our documents to meet our customers’ requirements, we have modified the manner in which we document configuration tasks. As a result of this, you may find a deviation in the style used to describe these tasks, with the newly included sections of the document following the new format.
Command descriptions use these conventions:
Screen examples use these conventions:
This document uses the following conventions:
Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the manual.
Documentation for Cisco Nexus 6000 Series switches Switches and Cisco Nexus 2000 Series Fabric Extender is available at the following URL:
http://www.cisco.com/en/US/products/ps9670/tsd_products_support_series_home.html
The following are related Cisco Nexus 6000 Series and Cisco Nexus 2000 Series Fabric Extender documents:
Cisco Nexus 6000 Series and Cisco Nexus 2000 Series Release Notes
Cisco Nexus 6000 Series Platform Hardware Installation Guide
Cisco Nexus 2000 Series Hardware Installation Guide
Regulatory Compliance and Safety Information for the Cisco Nexus 6000 Series Switches and Cisco Nexus 2000 Series Fabric Extenders
Cisco Bug Search Tool (BST) is a web-based tool that acts as a gateway to the Cisco bug tracking system that maintains a comprehensive list of defects and vulnerabilities in Cisco products and software. BST provides you with detailed defect information about your products and software.