Cisco Nexus 3548 NX-OS Command Reference (Show Commands), Release 7.0(3)I7(4)

show callhome

show callhome [ __readonly__ <output_state> <info> <per_name> [ <name> ] <email_info> [ <email_conf> ] <ph_info> [ <ph_conf> ] <str_addr> [ <str_conf> ] <site_id> [ <site_id_conf> ] <cust_id> [ <cus_id_conf> ] <contr_id> [ <contr_id_conf> ] <swi_pri> [ <swi_pri_value> ] <dup_mess> <per_inv> <per_time> <per_timeofday> <dist> ]

Syntax Description


show	Show running system information
callhome	Show callhome information
__readonly__	(Optional)
output_state	(Optional)
info	(Optional)
per_name	(Optional)
name	(Optional)
email_info	(Optional)
email_conf	(Optional)
ph_info	(Optional)
ph_conf	(Optional)
str_addr	(Optional)
str_conf	(Optional)
site_id	(Optional)
site_id_conf	(Optional)
cust_id	(Optional)
cus_id_conf	(Optional)
contr_id	(Optional)
contr_id_conf	(Optional)
swi_pri	(Optional)
swi_pri_value	(Optional)
dup_mess	(Optional)
per_inv	(Optional)
per_time	(Optional)
per_timeofday	(Optional)
dist	(Optional)

Command Mode

/exec

show callhome destination-profile

show callhome destination-profile [ __readonly__ { TABLE_call_info [ <dest_full_info> ] [ <dest_short_info> ] [ <dest_xml_info> ] [ <dest_def_info> ] <max_mess_size> <mess_format> <mess_level> <trans_method> <email_info> [ <email_conf> ] <url_info> [ <url_conf> ] <alert_groups> [ <alert_conf> ] } ]

Syntax Description


show	Show running system information
callhome	Show callhome information
destination-profile	Show callhome destination profile information
__readonly__	(Optional)
TABLE_call_info	(Optional)
dest_full_info	(Optional)
dest_short_info	(Optional)
dest_xml_info	(Optional)
dest_def_info	(Optional)
max_mess_size	(Optional)
mess_format	(Optional)
mess_level	(Optional)
trans_method	(Optional)
email_info	(Optional)
email_conf	(Optional)
url_info	(Optional)
url_conf	(Optional)
alert_groups	(Optional)
alert_conf	(Optional)

Command Mode

/exec

show callhome destination-profile profile

show callhome destination-profile profile <s0> [ __readonly__ <user_txt_info> <max_mess_size> <mess_format> <mess_level> <trans_method> <email_info> [ TABLE_email [ <email_conf> ] ] <url_info> [ TABLE_url [ <url_conf> ] ] <alert_groups> [ TABLE_alert [ <alert_conf> ] ] ]

Syntax Description


show	Show running system information
callhome	Show callhome information
destination-profile	Show callhome destination profile information
profile	Specify the destination profile
s0	Show information for user defined destination profile
__readonly__	(Optional)
user_txt_info	(Optional)
max_mess_size	(Optional)
mess_format	(Optional)
mess_level	(Optional)
trans_method	(Optional)
email_info	(Optional)
TABLE_email	(Optional)
email_conf	(Optional)
url_info	(Optional)
TABLE_url	(Optional)
url_conf	(Optional)
alert_groups	(Optional)
TABLE_alert	(Optional)
alert_conf	(Optional)

Command Mode

/exec

show callhome destination-profile profile CiscoTAC-1

show callhome destination-profile profile CiscoTAC-1 [ __readonly__ <tac_xml_info> <max_mess_size> <mess_level> <trans_method> <email_info> [ <email_conf> ] <url_info> [ <url_conf> ] <alert_groups> [ <alert_conf> ] ]

Syntax Description


show	Show running system information
callhome	Show callhome information
destination-profile	Show callhome destination profile information
profile	Specify the destination profile
CiscoTAC-1	Show information for CiscoTAC-1 destination profile
__readonly__	(Optional)
tac_xml_info	(Optional)
max_mess_size	(Optional)
mess_level	(Optional)
trans_method	(Optional)
email_info	(Optional)
email_conf	(Optional)
url_info	(Optional)
url_conf	(Optional)
alert_groups	(Optional)
alert_conf	(Optional)

Command Mode

/exec

show callhome destination-profile profile full-txt-destination

show callhome destination-profile profile full-txt-destination [ __readonly__ <full_txt_info> <max_mess_size> <mess_level> <trans_method> <email_info> [ <email_conf> ] <url_info> [ <url_conf> ] <alert_groups> [ <alert_conf> ] ]

Syntax Description


show	Show running system information
callhome	Show callhome information
destination-profile	Show callhome destination profile information
profile	Specify the destination profile
full-txt-destination	Show information for full-txt-destination destination profile
__readonly__	(Optional)
full_txt_info	(Optional)
max_mess_size	(Optional)
mess_level	(Optional)
trans_method	(Optional)
email_info	(Optional)
email_conf	(Optional)
url_info	(Optional)
url_conf	(Optional)
alert_groups	(Optional)
alert_conf	(Optional)

Command Mode

/exec

show callhome destination-profile profile short-txt-destination

show callhome destination-profile profile short-txt-destination [ __readonly__ <shrt_txt_info> <max_mess_size> <mess_level> <trans_method> <email_info> [ <email_conf> ] <url_info> [ <url_conf> ] <alert_groups> [ <alert_conf> ] ]

Syntax Description


show	Show running system information
callhome	Show callhome information
destination-profile	Show callhome destination profile information
profile	Specify the destination profile
short-txt-destination	Show information for short-txt-destination destination profile
__readonly__	(Optional)
shrt_txt_info	(Optional)
max_mess_size	(Optional)
mess_level	(Optional)
trans_method	(Optional)
email_info	(Optional)
email_conf	(Optional)
url_info	(Optional)
url_conf	(Optional)
alert_groups	(Optional)
alert_conf	(Optional)

Command Mode

/exec

show callhome transport-email

show callhome transport-email [ __readonly__ { <from_email> } [ <reply_to_email> ] [ <return_receipt_addr> ] { <smtp_server> } [ <smtp_server_port> ] ]

Syntax Description


__readonly__	(Optional)
show	Show running system information
callhome	Show callhome information
transport-email	Show callhome email transport configuration
from_email	(Optional)
reply_to_email	(Optional)
return_receipt_addr	(Optional)
smtp_server	(Optional)
smtp_server_port	(Optional)

Command Mode

/exec

show callhome transport

show callhome transport [ __readonly__ <vrf> <from_email> [ <rep_email> ] [ <ret_email> ] [ <smtp_ser> ] [ <smtp_ser_port> ] [ <smtp_ser_vrf> ] [ <smtp_ser_prior> ] [ <smtp_ser_do> ] [ <smtp_ser_port_do> ] [ <smtp_ser_vrf_do> ] [ <smtp_ser_prior_do> ] [ <smtp_ser_got> ] [ <smtp_ser_port_got> ] [ <smtp_ser_vrf_got> ] [ <smtp_ser_prior_got> ] <http_prox> <http_port> <http_state> ]

Syntax Description


show	Show running system information
callhome	Show callhome information
transport	Show callhome transport configuration (email and http)
__readonly__	(Optional)
vrf	(Optional)
from_email	(Optional)
rep_email	(Optional)
ret_email	(Optional)
smtp_ser	(Optional)
smtp_ser_port	(Optional)
smtp_ser_vrf	(Optional)
smtp_ser_prior	(Optional)
smtp_ser_do	(Optional)
smtp_ser_port_do	(Optional)
smtp_ser_vrf_do	(Optional)
smtp_ser_prior_do	(Optional)
smtp_ser_got	(Optional)
smtp_ser_port_got	(Optional)
smtp_ser_vrf_got	(Optional)
smtp_ser_prior_got	(Optional)
http_prox	(Optional)
http_port	(Optional)
http_state	(Optional)

Command Mode

/exec

show callhome user-def-cmds

show callhome user-def-cmds [ __readonly__ { <user_configured_cmds> } [ { TABLE_user_def_cmds <alert_group> <user_defined_cmds> } ] ]

Syntax Description


show	Show running system information
callhome	Show callhome information
user-def-cmds	Show the cli commands configured for each alert group
__readonly__	(Optional)
user_configured_cmds	(Optional) List of user configured commands
TABLE_user_def_cmds	(Optional)
alert_group	(Optional)
user_defined_cmds	(Optional)

Command Mode

/exec

show catena

show catena <instance-name> [ brief ] [ __readonly__ <instance_name> <state> { TABLE_chain <chain> [ TABLE_rule <seqno> <aclname> <whichconfig> [ <vlan_group> ] [ <ingress_port> ] [ <egress_port> ] [ <egress_device> ] [ <mode> ] [ <l2_lb> ] ] } ]

Syntax Description


show	Show running system information
catena	catena
instance-name	instance name
brief	(Optional) brief
__readonly__	(Optional) Read Only
instance_name	(Optional) instance_name
state	(Optional) status
TABLE_chain	(Optional)
chain	(Optional) chain
TABLE_rule	(Optional)
seqno	(Optional) seqno
aclname	(Optional) aclname
whichconfig	(Optional) whichconfig
vlan_group	(Optional) vlangrp
ingress_port	(Optional) ingress_portgrp
egress_port	(Optional) egress_portgrp
egress_device	(Optional) egress_device
mode	(Optional) mode
l2_lb	(Optional) L2 Load Balance

Command Mode

/exec

show catena analytics

show catena analytics { per-acl { per-node | per-device-group } | per-catena-instance <instance-name> [ per-chain [ <chain-id> ] ] } [ __readonly__ <instance_name> <per_node> <per_node_total> <per_node_total_val> <chain_id> <per_device_group> <per_device_group_hdr> <per_device_group_val> <stats_counter> ]

Syntax Description


show	Show running system information
catena	catena
analytics	show analytics for catena
per-acl	per ACL
per-node	per Node
per-device-group	per Device group
per-catena-instance	per Catena Instance
instance-name	Name of Catena Instance
per-chain	(Optional) per Chain
chain-id	(Optional) chain ID
__readonly__	(Optional) Read Only
instance_name	(Optional) Catena Instance name
chain_id	(Optional) Chain ID
per_node	(Optional) per Node
per_node_total	(Optional) per Node total
per_node_total_val	(Optional) per Node total val
per_device_group	(Optional) per Device Group
per_device_group_hdr	(Optional) per Device Group Header
per_device_group_val	(Optional) per Device Group Val
stats_counter	(Optional) stats_counter

Command Mode

/exec

show cdp

show cdp { entry { all1 | name <s0> } } [ __readonly__ TABLE_cdp_entry_all <device_id> [ <sysname> ] [ { <v4addr> | <v6addr> } + ] <platform_id> <capability> + <intf_id> <port_id> <ttl> <version> <version_no> [ <nativevlan> ] [ <vtpname> ] [ <duplexmode> ] [ <syslocation> ] [ { <v4mgmtaddr> | <v6mgmtaddr> } + ] ]

Syntax Description


show	Show running system information
cdp	Show Cisco Discovery Protocol information
entry	Show CDP entries in database
all1	Show all CDP entries in database
name	Show a specific CDP entry matching a name
s0
__readonly__	(Optional) Read only
TABLE_cdp_entry_all	(Optional) output of show cdp entry all
device_id	(Optional) Device Identifier
sysname	(Optional) System Name
v4addr	(Optional) Interface IP V4 Address
v6addr	(Optional) Interface IP V6 Address
platform_id	(Optional) Platform Id
capability	(Optional) Capability
intf_id	(Optional) Interface Id
port_id	(Optional) Port Identifier
ttl	(Optional) Hold Time
version	(Optional) Software Version
version_no	(Optional) CDP version number
nativevlan	(Optional) NativeVLAN
vtpname	(Optional) Vtp Management Domain Name
duplexmode	(Optional) Duplex Mode
syslocation	(Optional) System Location
v4mgmtaddr	(Optional) IP V4 Mgmt Address
v6mgmtaddr	(Optional) IP V6 Mgmt Address

Command Mode

/exec

show cdp all

show cdp { all | interface <if0> } [ __readonly__ TABLE_cdp_all <intf_id> <port_up> [ <cdp_global_enabled> ] <cdp_intf_enabled> [ <oper_mode> ] <refresh_time> <ttl> ]

Syntax Description


show	Show running system information
cdp	Show Cisco Discovery Protocol information
all	Show all interfaces in CDP database
interface	Show CDP parameters for an interface
if0
__readonly__	(Optional) Read only
TABLE_cdp_all	(Optional) output of show cdp all
intf_id	(Optional) Interface Id
port_up	(Optional) Port status
cdp_global_enabled	(Optional) CDP global status
cdp_intf_enabled	(Optional) CDP interface status
oper_mode	(Optional) CDP operation mode
refresh_time	(Optional) Refresh Time
ttl	(Optional) Hold Time

Command Mode

/exec

show cdp global

show cdp global [ __readonly__ <cdp_global_enabled> <refresh_time> <ttl> <v2_advertisement> <deviceid_format> ]

Syntax Description


show	Show running system information
cdp	Show Cisco Discovery Protocol information
global	Show CDP global parameters
__readonly__	(Optional) Read only
cdp_global_enabled	(Optional) CDP global status
refresh_time	(Optional) Refresh Time
ttl	(Optional) Hold Time
v2_advertisement	(Optional) Show v2 advertisement
deviceid_format	(Optional) Show deviceId Format

Command Mode

/exec

show cdp neighbors

show cdp neighbors [ interface <if> ] [ __readonly__ { TABLE_cdp_neighbor_brief_info <ifindex> <device_id> <intf_id> <ttl> <capability> + <platform_id> <port_id> } { <neigh_count> } ]

Syntax Description


show	Show running system information
cdp	Show Cisco Discovery Protocol information
neighbors	Show CDP neighbors
interface	(Optional) Show CDP neighbors on an interface
if	(Optional) Specify Interface
__readonly__	(Optional) Read only
TABLE_cdp_neighbor_brief_info	(Optional) output of show cdp neighbor - in breif
ifindex	(Optional) Interface index
device_id	(Optional) System Name (or) Device Identifier
intf_id	(Optional) Interface Id
port_id	(Optional) Port Identifier
platform_id	(Optional) Platform Id
ttl	(Optional) Hold Time
capability	(Optional) Capability
neigh_count	(Optional) Neighbor Count

Command Mode

/exec

show cdp neighbors detail

show cdp neighbors [ interface <if> ] detail [ __readonly__ TABLE_cdp_neighbor_detail_info <ifindex> <device_id> [ <sysname> ] [ <vtpname> ] <numaddr> [ { <v4addr> | <v6addr> } + ] <platform_id> <capability> + <intf_id> <port_id> <ttl> <version> <version_no> [ <nativevlan> ] [ <duplexmode> ] [ <mtu> ] [ <syslocation> ] [ <num_mgmtaddr> [ { <v4mgmtaddr> | <v6mgmtaddr> } + ] ] ]

Syntax Description


show	Show running system information
cdp	Show Cisco Discovery Protocol information
neighbors	Show CDP neighbors
detail	Show CDP neighbors detailed
interface	(Optional) Show CDP neighbors on an interface
if	(Optional) Specify Interface
__readonly__	(Optional) Read only
TABLE_cdp_neighbor_detail_info	(Optional) output of show cdp neighbor detail
ifindex	(Optional) Interface index
device_id	(Optional) Device Identifier
sysname	(Optional) System Name
vtpname	(Optional) Vtp Management Domain Name
numaddr	(Optional) No of IP Address configured
v4addr	(Optional) Interface IP V4 Address
v6addr	(Optional) Interface IP V6 Address
platform_id	(Optional) Platform Id
capability	(Optional) Capability
intf_id	(Optional) Interface Id
port_id	(Optional) Port Identifier
ttl	(Optional) Hold Time
version	(Optional) Software Version
version_no	(Optional) CDP version number
nativevlan	(Optional) NativeVLAN
duplexmode	(Optional) Duplex Mode
mtu	(Optional) MTU
syslocation	(Optional) System Location
num_mgmtaddr	(Optional) No of Mgmt Address configured
v4mgmtaddr	(Optional) IP V4 Mgmt Address
v6mgmtaddr	(Optional) IP V6 Mgmt Address

Command Mode

/exec

show cdp traffic interface2

show cdp traffic interface2 <if2> [ __readonly__ <intf_id> <total_input_packets> <valid_cdp_packets> <input_v1_packets> <input_v2_packets> <invalid_cdp_packets> <unsupported_version> <checksum_errors> <malformed_packets> <total_output_packets> <output_v1_packets> <output_v2_packets> <send_errors> ]

Syntax Description


show	Show running system information
cdp	Show Cisco Discovery Protocol information
traffic	Show CDP traffic statistics
interface2	Show CDP traffic statistics on an interface
if2
__readonly__	(Optional) Read only
intf_id	(Optional) Interface Id
total_input_packets	(Optional) Total input cdp packets
valid_cdp_packets	(Optional) Total valid cdp packets
input_v1_packets	(Optional) Input vesrion1 packets
input_v2_packets	(Optional) Input vesrion2 packets
invalid_cdp_packets	(Optional) Invalid cdp packets
unsupported_version	(Optional) Packets having unsupported version
checksum_errors	(Optional) Packets having checksum errors
malformed_packets	(Optional) Total malformed packets
total_output_packets	(Optional) Total output packets
output_v1_packets	(Optional) Output vesrion1 packets
output_v2_packets	(Optional) Output vesrion2 packets
send_errors	(Optional) Number of send errors

Command Mode

/exec

show cfs application

show cfs application [ { name <cfs-dyn-app-name> | sap <i0> } ] [ __readonly__ [ { enabled <enabled> } { timeout <timeout> } { merge_capable <merge_capable> } { scope <scope> } { region <region> } ] [ { TABLE_apps <app_name> <app_enabled> <app_scope> } ] ]

Syntax Description


show	Show running system information
cfs	CFS Show Command handler
application	Show locally registered applications
name	(Optional) Show local application information by name
cfs-dyn-app-name	(Optional) Registered name of the local application
sap	(Optional) Show local application information by sap
i0	(Optional) Registered sap of the local application
__readonly__	(Optional)
enabled	(Optional) whether application is CFS enabled
enabled	(Optional) whether application is CFS enabled
timeout	(Optional) timeout
timeout	(Optional) timeout
merge_capable	(Optional) merge_capable
merge_capable	(Optional) merge_capable
scope	(Optional) scope
scope	(Optional) scope
region	(Optional) region
region	(Optional) region
TABLE_apps	(Optional) all cfs applications
app_name	(Optional) name of cfs application
app_enabled	(Optional) whether application is cfs enabled
app_scope	(Optional) distribution scope of cfs application

Command Mode

/exec

show cfs lock

show cfs lock [ { name <cfs-dyn-app-name> | sap <i1> } ] [ __readonly__ [ { TABLE_locks [ <app_name> ] <app_scope> [ <vsan> ] [ <domain> ] [ <wwn> ] <ip_addr> <u_name> <u_type> [ <hostname> ] } ] ]

Syntax Description


show	Show running system information
cfs	CFS Show Command handler
lock	Show state of application's logical/physical locks
name	(Optional) Application name for which the lock status is required
cfs-dyn-app-name	(Optional) Registered name of the local application
sap	(Optional) Application sap for which the lock status is required
i1	(Optional) Application SAP
__readonly__	(Optional)
TABLE_locks	(Optional) table of all CFS locks
app_name	(Optional) name of CFS application
app_scope	(Optional) scope of CFS application
vsan	(Optional) vsan
domain	(Optional) domain
wwn	(Optional) wwn of switch holding CFS lock
ip_addr	(Optional) ip address of switch holding CFS lock
u_name	(Optional) user name
u_type	(Optional) user type
hostname	(Optional) hostname

Command Mode

/exec

show cfs merge status

show cfs merge status [ { name <cfs-dyn-app-name> [ detail ] | sap <i1> [ detail2 ] } ] [ __readonly__ [ { scope <scope> } ] [ { merge_status <status> } ] [ { failure_reason <reason> } ] [ { TABLE_all_merge <app_name> <scope> <vsan> <status> } ] [ { TABLE_local_fabric [ <domain> ] <wwn> <ip_addr> <app_scope> [ <master> ] [ <hostname> ] } ] [ { TABLE_remote_fabric [ <domain> ] <wwn> <ip_addr> <app_scope> [ <master> ] [ <hostname> ] } ] [ { TABLE_remaining_fabric [ <domain> ] <wwn> <ip_addr> [ <hostname> ] } ] ]

Syntax Description


show	Show running system information
cfs	CFS Show Command handler
merge	Show cfs merge information
status	Show status of merge
name	(Optional) Show merge status by name
cfs-dyn-app-name	(Optional) Registered name of the local application
detail	(Optional) Show merge status by name in detail
sap	(Optional) Show merge status by sap
i1	(Optional) Application sap
detail2	(Optional) Show merge status by sap in detail
__readonly__	(Optional)
scope	(Optional) distribution scope of application
scope	(Optional) scope
merge_status	(Optional) status
status	(Optional) status
failure_reason	(Optional) reason
reason	(Optional) reason
TABLE_all_merge	(Optional) all
app_name	(Optional) name
scope	(Optional) scope
vsan	(Optional) vsan
status	(Optional) status
TABLE_local_fabric	(Optional) local fabric
domain	(Optional) domain
wwn	(Optional) wwn
ip_addr	(Optional) ip_addr
app_scope	(Optional) scope
master	(Optional) master
hostname	(Optional) hname
TABLE_remote_fabric	(Optional) remote fabric
domain	(Optional) domain
wwn	(Optional) wwn
ip_addr	(Optional) ip_addr
app_scope	(Optional) scope
master	(Optional) master
hostname	(Optional) hname
TABLE_remaining_fabric	(Optional) remote fabric
domain	(Optional) domain
wwn	(Optional) wwn
ip_addr	(Optional) ip_addr
hostname	(Optional) hname

Command Mode

/exec

show cfs peers

show cfs peers [ { name <cfs-dyn-app-name> | sap <i1> } ] [ __readonly__ [ { scope <scope> } ] [ { TABLE_peers <wwn> <ip_addr> [ <local> ] [ <hostname> ] [ <domain> ] } ] ]

Syntax Description


show	Show running system information
cfs	CFS Show Command handler
peers	Show all the peers in the physical fabric
name	(Optional) Show peers for given application name
cfs-dyn-app-name	(Optional) Registered name of the local application
sap	(Optional) Show peers for given application sap
i1	(Optional) Application sap
__readonly__	(Optional)
scope	(Optional) scope
scope	(Optional) scope
TABLE_peers	(Optional) all peers
wwn	(Optional) wwn
ip_addr	(Optional) ip_addr
local	(Optional) local
hostname	(Optional) hname
domain	(Optional) domain

Command Mode

/exec

show cfs regions

show cfs regions [ { brief [ region <i0> ] | name <cfs-dyn-app-name> | region1 <i1> } ] [ __readonly__ [ { region <id> } ] [ { application <name> } ] [ { scope <scope> } ] [ { TABLE_PEERS <wwn> <ip_addr> <local> [ <hostname> ] [ <domain> ] } ] [ { TABLE_switches [ <wwn> ] [ <ip_addr> ] <region> <app_name> <enabled> [ <scope> ] } ] ]

Syntax Description


show	Show running system information
cfs	CFS Show Command handler
regions	Show all the applications with peers and region information
brief	(Optional) Show all configured regions and applications(no peers)
region	(Optional) Show all configured applications(no peers)
i0	(Optional) Region Id
name	(Optional) Show peers and region information for a given application
cfs-dyn-app-name	(Optional) Registered name of the local application
region1	(Optional) Show all configured applications with peers
i1	(Optional) Region Id
__readonly__	(Optional)
region	(Optional) region
id	(Optional) id
application	(Optional) app
name	(Optional) name
scope	(Optional) scope
scope	(Optional) scope
TABLE_PEERS	(Optional) all region peers
wwn	(Optional) wwn
ip_addr	(Optional) ip_address
local	(Optional) local
hostname	(Optional) hname
domain	(Optional) domain
TABLE_switches	(Optional) all switches in region
wwn	(Optional) wwn
ip_addr	(Optional) ip_addr
region	(Optional) region
app_name	(Optional) name
enabled	(Optional) enabled
scope	(Optional) scope

Command Mode

/exec

show cfs remote-app vsan domain

show cfs remote-app vsan <i0> domain <i1>

Syntax Description


show	Show running system information
cfs	CFS Show Command handler
remote-app	Show remote cfs registered applications
vsan	Show remote applications given a vsan
i0	VSAN id
domain	Show remote applications
i1	Enter the domain id

Command Mode

/exec

show cfs remote-switches vsan

show cfs remote-switches vsan <i0> [ __readonly__ { local <domain> } [ { TABLE_switches <remote_domain> <wwn> } ] ]

Syntax Description


show	Show running system information
cfs	CFS Show Command handler
remote-switches	Show remote switches on a given vsan
vsan	Show remote switches on a given vsan
i0	VSAN id
__readonly__	(Optional)
local	(Optional) local
domain	(Optional) domain
TABLE_switches	(Optional) all remote switches
remote_domain	(Optional) rdomain
wwn	(Optional) wwn

Command Mode

/exec

show cfs static peers

Syntax Description


show	Show running system information
cfs	CFS Show Command handler
static	Show all static peers with status
peers	Show all configured static peers with status

Command Mode

/exec

show cfs status

show cfs status [ __readonly__ { distribution <distribution> } { distribution_over_ip <dist_over_ip> } { ipv4_multicast_address <ipv4_mcast_addr> } { ipv6_multicast_address <ipv6_mcast_addr> } { distribution_over_ethernet <dist_over_eth> } ]

Syntax Description


show	Show running system information
cfs	CFS Show Command handler
status	Show current status of CFS
__readonly__	(Optional)
distribution	(Optional) runtime status of CFS distribution
distribution	(Optional) operational status of CFS distribution
distribution_over_ip	(Optional) runtime information of CFSoIP
dist_over_ip	(Optional) operational status of CFS overIP
ipv4_multicast_address	(Optional) ipv4 multicast address
ipv4_mcast_addr	(Optional) ipv4 multicast address
ipv6_multicast_address	(Optional) ipv6 multicast address
ipv6_mcast_addr	(Optional) ipv6 multicast address
distribution_over_ethernet	(Optional) runtime status if CFSoE
dist_over_eth	(Optional) operations status of CFSoE

Command Mode

/exec

show checkpoint

show checkpoint [ all ] [ user | system ] [ __readonly__ TABLE_checkpoint_details <name> <checkpoint_config> + ]

Syntax Description


show	Show running system information
checkpoint	Show configuration rollback checkpoints
all	(Optional) Show default config
user	(Optional) Show only user configuration rollback checkpoints
system	(Optional) Show only system configuration rollback checkpoints
__readonly__	(Optional) Read only
TABLE_checkpoint_details	(Optional) checkpoint details
name	(Optional) Checkpoint name
checkpoint_config	(Optional) Configuration entry from checkpoint

Command Mode

/exec

show checkpoint

show checkpoint <chkpoint_name> [ all ] [ __readonly__ TABLE_checkpoint_details <name1> <checkpoint_config> + ]

Syntax Description


show	Show running system information
checkpoint	Show configuration rollback checkpoint contents
chkpoint_name	Checkpoint name
all	(Optional) Show default config
__readonly__	(Optional) Read only
TABLE_checkpoint_details	(Optional) Checkpoint details
name1	(Optional) Checkpoint name
checkpoint_config	(Optional) Configuration entry from checkpoint

Command Mode

/exec

show checkpoint summary

show checkpoint summary [ user | system ] [ __readonly__ TABLE_checkpoint_header_info <name> <user_name> <timestamp> <file_path> <chkpt_type> <description> ]

Syntax Description


show	Show running system information
checkpoint	Show configuration rollback checkpoints
summary	Show configuration rollback checkpoints summary
user	(Optional) Show only user configuration rollback checkpoints summary
system	(Optional) Show only system configuration rollback checkpoints summary
__readonly__	(Optional) Read only
TABLE_checkpoint_header_info	(Optional) Checkpoint header info
user_name	(Optional) Username
name	(Optional) Checkpoint name
file_path	(Optional) Checkpoint name
timestamp	(Optional) Timestamp of checkpoint creation
chkpt_type	(Optional) Type of checkpoint either user or system
description	(Optional) Checkpoint description

Command Mode

/exec

show class-map

show class-map [ { [ type qos ] [ <cmap-name> | xxx <color-map-enum-name> ] } | { type queuing [ yyy <cmap-enum-name> | zzz <default-cmap-enum-name> | <cmap-dce-name> | <cmap-name-hque> ] } ] [ __readonly__ { [ <display-all> ] [ TABLE_cmap <cmap-key> [ <id> ] <xqos-or-q> [ <any_or_all> ] <cmap-name-out> [ <desc> ] [ TABLE_match <match-key> [ <not> ] [ <dscp-list> ] [ <precedence-list> ] [ <cos-list> ] [ <qos-group-list> ] [ <discard-class-list> ] [ <vlan-list> ] [ <match-cmap-name> ] [ <match-acl-name> ] [ <note-string> ] [ <pkt-len-list> ] [ <rtp-port-list> ] [ <roce-port-list> ] [ <prot> ] [ <input-iface-list> ] [ <exp-list> ] [ <cl-def> ] ] ] } ]

Syntax Description


xxx	(Optional) xxx
yyy	(Optional) yyy
zzz	(Optional) zzz
show	Show running system information
class-map	Show class maps
type	(Optional) Type of the class-map
qos	(Optional) type qos
queuing	(Optional) type queuing
cmap-name	(Optional) class map name
cmap-enum-name	(Optional)
default-cmap-enum-name	(Optional)
cmap-dce-name	(Optional) Queuing class-map name
cmap-name-hque	(Optional) Hierarchical class-map name
color-map-enum-name	(Optional)
__readonly__	(Optional)
display-all	(Optional) Display all kinds of class-maps
TABLE_cmap	(Optional) all cmap xml sessions
cmap-key	(Optional) Class-map name: xml key
TABLE_match	(Optional) all match xml sessions
match-key	(Optional) match count: xml key
cmap-name-out	(Optional) Class-map name
xqos-or-q	(Optional)
any_or_all	(Optional) Enter match-any or match-all
id	(Optional) Class-map ID
desc	(Optional) Description string
not	(Optional) Negate this match result
dscp-list	(Optional) List of DSCP values
precedence-list	(Optional) List of precedence values
cos-list	(Optional) List of class-of-service values
qos-group-list	(Optional) List of qos-group values
discard-class-list	(Optional) List of discard-class values
vlan-list	(Optional) List of vlan-ids
match-cmap-name	(Optional) class-map name
match-acl-name	(Optional) Match class-map name
note-string	(Optional) Placeholder string param to display any info in string format
pkt-len-list	(Optional) Packet length multi-range
rtp-port-list	(Optional) IP RTP UDP port multi-range
roce-port-list	(Optional) IP ROCE UDP port multi-range
prot	(Optional) Protocol
input-iface-list	(Optional) Input Interface multi-range
exp-list	(Optional) List of MPLS exp values
cl-def	(Optional) Match any criteria for class-default only

Command Mode

/exec

show class-map type control-plane

show class-map type control-plane [ <cmap-name> ] [ __readonly__ [ { TABLE_cmap <cmap-key> <cmap-name-out> <opt_any_or_all> [ TABLE_match <match-key> [ access_grp <acc_grp_name> ] [ redirect <opt_match_redirect> ] [ exception <opt_match_excpt> ] [ protocol <opt_match_protocol> ] ] } ] ]

Syntax Description


show	Show running system information
class-map	Show class maps
type	Type of the class-map
control-plane	This is for copp policy
cmap-name	(Optional) Name of the class-map
__readonly__	(Optional)
TABLE_cmap	(Optional) all cmap xml sessions
cmap-name-out	(Optional) Name of the class-map
cmap-key	(Optional) Class-map name: xml key
opt_any_or_all	(Optional) Enter match-any or match-all
TABLE_match	(Optional) all match xml sessions
match-key	(Optional) match count: xml key
access_grp	(Optional)
acc_grp_name	(Optional)
redirect	(Optional)
opt_match_redirect	(Optional) Match criteria for redirected packets
exception	(Optional)
opt_match_excpt	(Optional) Match criteria for exception packets
protocol	(Optional)
opt_match_protocol	(Optional) Match criteria for protocol packets

Command Mode

/exec

show class-map type network-qos

show class-map type network-qos [ <cmap-name-nq> ] [ __readonly__ { [ <display-all> ] [ TABLE_cmap <cmap-key> <xcmap-name> [ <desc> ] [ <cos-list> ] <qos-group-list> [ <protocol> ] ] } ]

Syntax Description


show	Show running system information
class-map	Show class maps
type	Type of the class-map
cmap-name-nq	(Optional) Class-map name
network-qos	type network-qos
__readonly__	(Optional)
display-all	(Optional) Display all network-qos class-maps
TABLE_cmap	(Optional) all network-qos cmap xml sessions
cmap-key	(Optional) Class-map name: xml key
desc	(Optional) Description string
xcmap-name	(Optional) Class-map name
protocol	(Optional) protocol
cos-list	(Optional) List of class-of-service values
qos-group-list	(Optional) List of qos-group values

Command Mode

/exec

show class-map type psp

show class-map type psp { [ <cmap-name-plc> [ client <clienttype> <clientID> ] [ cfg-mode <cfgmode> ] ] | [ handle <ppf_id> ] } [ __readonly__ { [ <display-all> ] [ TABLE_cmap <cmap-key> [ <id> ] [ <any_or_all> ] [ <__inline__> ] [ class-default ] <cmap-name-out> [ <desc> ] [ TABLE_match <match-key> [ <not> ] [ <any> ] [ <cos-list> ] [ <mac_src> <mac_src_wild> ] [ <mac_dest> <mac_dest_wild> ] [ <eth-value> ] [ <vlan-number> ] [ <tos-value> ] [ <ip-protocol-value> ] [ <ip-s-addr> <ip-s-mask> ] [ <ip-d-addr> <ip-d-mask> ] [ <tcp-src-port-addr> ] [ <tcp-dest-port-addr> ] [ <udp-src-port-addr> ] [ <udp-dest-port-addr> ] [ <interface-name> ] [ <ipv6-s-addr> <ipv6-s-mask> ] [ <ipv6-d-addr> <ipv6-d-mask> ] [ <dscp-list> ] ] ] } ]

Syntax Description


show	Show running system information
class-map	Show class maps
type	Type of the class-map
psp	type psp
cmap-name-plc	(Optional) Class-map name
client	(Optional) set client type
clienttype	(Optional) cli/onep
clientID	(Optional) client appID
cfg-mode	(Optional) cfg-mode
cfgmode	(Optional) persistent/transient
handle	(Optional) Handle
ppf_id	(Optional) PPF ID
__readonly__	(Optional)
display-all	(Optional) Display all kinds of class-maps
TABLE_cmap	(Optional) all cmap xml sessions
cmap-key	(Optional) Class-map name: xml key
TABLE_match	(Optional) all match xml sessions
match-key	(Optional) match count: xml key
class-default	(Optional)
cmap-name-out	(Optional) Class-map name
any_or_all	(Optional) Enter match-any or match-all
__inline__	(Optional) Inline class
id	(Optional) Class-map ID
desc	(Optional) Description string
not	(Optional) Negate this match result
any	(Optional) Wildcard match
cos-list	(Optional) List of class-of-service values
mac_src	(Optional) Source MAC address
mac_src_wild	(Optional) Source MAC mask
mac_dest	(Optional) Destination MAC address
mac_dest_wild	(Optional) Destination MAC mask
eth-value	(Optional) Ethernet type
vlan-number	(Optional) Vlan number
tos-value	(Optional) IPv4 TOS
ip-protocol-value	(Optional) IPV4 protocol
ip-s-addr	(Optional) IP address in format a.b.c.d
ip-d-addr	(Optional) IP address in format a.b.c.d
ip-s-mask	(Optional) IP address Mask in format a.b.c.d
ip-d-mask	(Optional) IP address Mask in format a.b.c.d
tcp-src-port-addr	(Optional) Transport layer port number
tcp-dest-port-addr	(Optional) Transport layer port number
udp-src-port-addr	(Optional) Transport layer port number
udp-dest-port-addr	(Optional) Transport layer port number
interface-name	(Optional) Physical interface Name and Number
dscp-list	(Optional) List of DSCP values

Command Mode

/exec

show cli alias

show cli alias [ name <s0> ] [ __readonly__ { TABLE_cli_alias <alias> <name> } ]

Syntax Description


show	Show running system information
cli	Show CLI information
alias	Display the alias configuration
name	(Optional) Display a specific alias
s0	(Optional) Specify the alias
__readonly__	(Optional)
TABLE_cli_alias	(Optional) cli alias table
alias	(Optional) alias
name	(Optional) name

Command Mode

/exec

show cli dynamic-cmd

Syntax Description


show	Show running system information
cli	CLI commands
dynamic-cmd	Display the list of dynamic commands(cli)

Command Mode

/exec

show cli dynamic integers

show cli dynamic integers [ <name> ] [ __readonly__ TABLE_dynamic_integers <name-o> <min> <max> ]

Syntax Description


show	Show running system information
cli	CLI commands
dynamic	Display current range of dynamic parameters
integers	Display current range of dynamic integer parameters
name	(Optional) name of the dynamic parameter
__readonly__	(Optional)
TABLE_dynamic_integers	(Optional)
name-o	(Optional)
min	(Optional)
max	(Optional)

Command Mode

/exec

show cli dynamic strings

show cli dynamic strings [ <name> ] [ __readonly__ TABLE_dynamic_strings <name-o> <value> + ]

Syntax Description


show	Show running system information
cli	CLI commands
dynamic	Display current range of dynamic parameters
strings	Display current range of dynamic string parameters
name	(Optional) name of the dynamic parameter
__readonly__	(Optional)
TABLE_dynamic_strings	(Optional)
name-o	(Optional)
value	(Optional)

Command Mode

/exec

show cli history

show cli history [ this-mode-only | exec-mode | config-mode ] [ <count> | unformatted ] +

Syntax Description


show	Show running system information
cli	debug cli
history	history of cli commands
count	(Optional) number of lines to display (from end)
unformatted	(Optional) display just the commands
this-mode-only	(Optional) display history from current mode only
exec-mode	(Optional) display history of exec commands only
config-mode	(Optional) display history of config commands only

Command Mode

/exec

show cli interface table

Syntax Description


show	show
cli	cli
interface	interface
table	table

Command Mode

/exec

show cli list

show cli list [ detail | recurse | <component> | <max-per-cmd> ] +

Syntax Description


show	Show running system information
cli	Show CLI information
list	show
component	(Optional) component
max-per-cmd	(Optional) max
recurse	(Optional) go
detail	(Optional) formats

Command Mode

/exec

show cli registry

show cli registry [ ctags | tags | modes | session | inherit ]

Syntax Description


show	Show running system information
cli
registry
ctags	(Optional)
tags	(Optional)
modes	(Optional)
session	(Optional)
inherit	(Optional)

Command Mode

/exec

show cli syntax

Syntax Description


show	Show running system information
cli	Show CLI information
syntax	show
long	(Optional) use
recurse	(Optional) also
has-xml-out	(Optional) show
has-no-xml-out	(Optional) show
is-data-modeled	(Optional) show
roles	(Optional) show
network-admin	(Optional) show
network-operator	(Optional) show
roles-mask	(Optional) show

Command Mode

/exec

show cli variables

show cli variables [ __readonly__ <switchname> <timestamp> [ { TABLE_variable <key> <value> } ] [ { TABLE_session_variable <key> <value> } ] ]

Syntax Description


show	Show running system information
cli	Show CLI information
variables	Show CLI variables
__readonly__	(Optional)
switchname	(Optional) Switch Name
timestamp	(Optional) Timestamp
TABLE_variable	(Optional) Variable table
key	(Optional) key
value	(Optional) value
TABLE_session_variable	(Optional) Session variable table
key	(Optional) key
value	(Optional) value

Command Mode

/exec

show clock

show clock [ detail ] [ __readonly__ { <simple_time> [ <daylight_zone> <daylight_start_week> <daylight_start_weekday> <daylight_start_month> <daylight_start_time> <daylight_end_week> <daylight_end_weekday> <daylight_end_month> <daylight_end_time> <daylight_utc_min_offset> ] } ]

Syntax Description


show	Show running system information
clock	Display current Date
detail	(Optional) Display current date and summertime configuration
__readonly__	(Optional)
simple_time	(Optional) simple clock format
daylight_zone	(Optional) summer-time daylight zone
daylight_start_week	(Optional) daylight start week
daylight_start_weekday	(Optional) daylight start weekday
daylight_start_month	(Optional) daylight start month
daylight_start_time	(Optional) daylight start time
daylight_end_week	(Optional) daylight end week
daylight_end_weekday	(Optional) daylight end weekday
daylight_end_month	(Optional) daylight end month
daylight_end_time	(Optional) daylight end time
daylight_utc_min_offset	(Optional) daylight utc offset

Command Mode

/exec

show clock utc

Syntax Description


show	Show running system information
clock	Display current Date
utc	Display current time in UTC

Command Mode

/exec

show config-profile

show config-profile [ name <all_conf_profile_name> ] [ __readonly__ TABLE_conf_profile_all <conf_profile_name> { <conf_profile_desc> <conf_profile_cfg> + <conf_profile_applied> + <conf_profile_include> + } ]

Syntax Description


show	Show running system information
config-profile	Show config-profiles
name	(Optional) config-profile name
all_conf_profile_name	(Optional) Enter the name of configuration profile
__readonly__	(Optional)
TABLE_conf_profile_all	(Optional)
conf_profile_name	(Optional)
conf_profile_desc	(Optional)
conf_profile_cfg	(Optional)
conf_profile_applied	(Optional)
conf_profile_include	(Optional)

Command Mode

/exec

show config-profile applied

show config-profile { applied [ auto | manually ] | non-applied } [ match-name <profile_substring> ] [ __readonly__ <profiles> ]

Syntax Description


show	Show running system information
config-profile	Show config-profiles
applied	List of config-profiles that are applied
auto	(Optional) List of config-profiles that are applied via auto-config
manually	(Optional) List of all config-profiles which were applied directly from cli
non-applied	List of config-profiles that are not applied
match-name	(Optional) List of all config-profiles that have matching sub-string
__readonly__	(Optional)
profiles	(Optional)
profile_substring	(Optional) Enter a substring to match with config-profile name

Command Mode

/exec

show config-replace log exec

show config-replace log { exec | verify } [ __readonly__ [ <log_entry> + ] ]

Syntax Description


show	Show running system information
config-replace	Show config-replace
log	show config-replace log
exec	show config-replace execution log
verify	show config-replace verify log
__readonly__	(Optional) Read only
log_entry	(Optional) log entry from configure replace log

Command Mode

/exec

show config-replace status

show config-replace status [ __readonly__ <last_operation> [ <config_replace_type> ] [ <name> ] [ <start_time> ] [ <end_time> ] [ <operation_status> ] [ <commit_status> ] [ <commit_timeout_remaining> ] ]

Syntax Description


show	Show running system information
config-replace	show config-replace
status	show status of last configure replace operation
__readonly__	(Optional) Read only
last_operation	(Optional) last operation
config_replace_type	(Optional) config-replace type
name	(Optional) name
start_time	(Optional) start time
end_time	(Optional) end time
operation_status	(Optional) operation status
commit_status	(Optional) Commit status
commit_timeout_remaining	(Optional) commit timeout remaining

Command Mode

/exec

show config-template

show config-template [ [ <template-name> ] [ status [ { vrf <vrf-name> } ] ] ] [ __readonly__ { TABLE_profile <name> <refcount> <type> [ TABLE_cfg <cfg> ] [ TABLE_status <vrfname> <status> ] } ]

Syntax Description


show	Show running system information
config-template	config-template
template-name	(Optional) config-template name
status	(Optional) config-template status
vrf	(Optional) VRF referencing config-template
vrf-name	(Optional) config-template name
__readonly__	(Optional)
TABLE_profile	(Optional)
name	(Optional) config-template name
refcount	(Optional) Ref count of VRFs using this config-template
type	(Optional) config-template type
TABLE_cfg	(Optional)
cfg	(Optional) profile config
TABLE_status	(Optional)
vrfname	(Optional) profile config
status	(Optional) profile status

Command Mode

/exec

show configuration session

show configuration session <s3> [ __readonly__ <ssn-name> { <ssn-cmd-num> <command> } + ]

Syntax Description


show	Show running system information
configuration	Show information about configuration sessions
session	Show active configuration sessions
s3	Shows configuration session given a name
__readonly__	(Optional) Read only
ssn-name	(Optional)
ssn-cmd-num	(Optional)
command	(Optional)

Command Mode

/exec

show configuration session

show configuration session [ __readonly__ { <ssn-name> <ssn-cmd-num> <command> } + <trlr> ]

Syntax Description


show	Show running system information
configuration	Show information about configuration sessions
session	Show active configuration sessions
__readonly__	(Optional) Read only
ssn-name	(Optional)
ssn-cmd-num	(Optional)
command	(Optional)
trlr	(Optional)

Command Mode

/exec

show configuration session global-info

show configuration session global-info [ __readonly__ <max-ssns> <max-cmds> <curr-num-ssns> <curr-num-cmds> ]

Syntax Description


show	Show running system information
configuration	Show information about configuration sessions
session	Show active configuration sessions
global-info	Show configuration sessions global-info
__readonly__	(Optional) Read only
max-ssns	(Optional)
max-cmds	(Optional)
curr-num-ssns	(Optional)
curr-num-cmds	(Optional)

Command Mode

/exec

show configuration session nx-api rest

Syntax Description


show	Show running system information
configuration	Show information about configuration sessions
session	Show active configuration sessions
nx-api	NX-API
rest	NX-API REST JSON format

Command Mode

/exec

show configuration session nx-yang json

show configuration session nx-yang { json | xml }

Syntax Description


show	Show running system information
configuration	Show information about configuration sessions
session	Show active configuration sessions
nx-yang	NXOS YANG
json	NXOS YANG JSON format
xml	NXOS YANG XML format

Command Mode

/exec

show configuration session status

show configuration session status [ <s3> ] [ __readonly__ <ssn-name> { <last-action> <ac-tstamp> <ac-status> <ac-reason> } { <failed-cmd-num> + <failed-cmd> } + { <last-vfy-cmd-num> <last-vfy-cmd> <last-vfy-tstamp> } + <rollback-status> + <trlr> ]

Syntax Description


show	Show running system information
configuration	Show information about configuration sessions
session	Show active configuration sessions
status	Show configuration session-mgr status
s3	(Optional) Shows configuration session status given a name
__readonly__	(Optional) Read only
ssn-name	(Optional)
last-action	(Optional)
ac-tstamp	(Optional)
ac-status	(Optional)
ac-reason	(Optional)
failed-cmd-num	(Optional)
failed-cmd	(Optional)
last-vfy-cmd-num	(Optional)
last-vfy-cmd	(Optional)
last-vfy-tstamp	(Optional)
rollback-status	(Optional)
trlr	(Optional)

Command Mode

/exec

show configuration session summary

show configuration session summary [ __readonly__ <hdr> { <ssn-name> <username> <tstamp> } + <trlr> ]

Syntax Description


show	Show running system information
configuration	Show information about configuration sessions
session	Show active configuration sessions
summary	Show summary of the active configuration sessions
__readonly__	(Optional) Read only
hdr	(Optional)
ssn-name	(Optional)
username	(Optional)
tstamp	(Optional)
trlr	(Optional)

Command Mode

/exec

show configuration session vsh

show configuration session <s3> vsh [ __readonly__ <ssn-name> { <ssn-cmd-num> <command> } + ]

Syntax Description


show	Show running system information
configuration	Show information about configuration sessions
session	Show active configuration sessions
s3	Shows configuration session given a name
vsh
__readonly__	(Optional) Read only
ssn-name	(Optional)
ssn-cmd-num	(Optional)
command	(Optional)

Command Mode

/exec

show consistency-checker l2 multicast group source vlan

show consistency-checker l2 multicast group <grp-address> source <src-address> vlan <vlan-id>

Syntax Description


show	Show running system information
consistency-checker	Consistency Checker
l2	l2 consistency
multicast	multicast related information
group	Do consistency check for group
grp-address	group IP address
source	Do consistency check for source
src-address	source IP address
vlan	Do consistency check for vlan
vlan-id	vlan number

Command Mode

/exec

show consistency-checker l3 multicast group source vrf

show consistency-checker l3 multicast group <grp-address> source <src-address> vrf <vrf-string>

Syntax Description


show	Show running system information
consistency-checker	Consistency Checker
l3	l3 consistency
multicast	multicast related information
group	Do consistency check for group
grp-address	group IP address
source	Do consistency check for source
src-address	source IP address
vrf	Do consistancy check for vrf
vrf-string	Vrf string

Command Mode

/exec

show consistency-checker link-state fabric-ieth

show consistency-checker link-state fabric-ieth { [ module <module> ] }

Syntax Description


show	Show running system information
consistency-checker	Consistency Checker
link-state	Compares software and hardware link state of interfaces
fabric-ieth	Internal Fabric ports
module	(Optional) Limit display to interfaces on module
module	(Optional) Enter module number

Command Mode

/exec

show consistency-checker vxlan l3-route vrf

show consistency-checker vxlan l3-route <l3-route> vrf <vrf-string>

Syntax Description


show	Show running system information
consistency-checker	Consistency Checker
vxlan	vxlan related information
l3-route	Do consistency check for route
l3-route	L3 Route IP Address
vrf	Do consistancy check for vrf
vrf-string	Vrf string

Command Mode

/exec

show controller accounting log

show controller <ctrl-id> accounting log

Syntax Description


show	Show running system information
controller	Controller command
ctrl-id	Controller id value
accounting	Accounting
log	Show log information

Command Mode

/exec

show copp status

show copp status [ __readonly__ { last_config_operation <last_cfg_oper> } { last_config_operation_time <last_cfg_oper_time> } { last_config_operation_status <last_cfg_oper_status> } [ last_config_operation_error_time <last_cfg_oper_error_time> ] [ last_config_operation_error <last_cfg_oper_error> ] { service_policy <srv_policy> } ]

Syntax Description


show	Show running system information
copp	Control-Plane Policing
status	Show the internal status of CoPP
__readonly__	(Optional)
last_config_operation	(Optional) last config operation
last_cfg_oper	(Optional) last config operation
last_config_operation_time	(Optional) timestamp of last config operation
last_cfg_oper_time	(Optional) timestamp of last config operation
last_config_operation_status	(Optional) status of last config operation
last_cfg_oper_status	(Optional) status of last config operation
last_config_operation_error_time	(Optional) timestamp of last config operation's error
last_cfg_oper_error_time	(Optional) timestamp of last config operation's error
last_config_operation_error	(Optional) last config operation's error
last_cfg_oper_error	(Optional) last config operation's error
service_policy	(Optional) policy-map attached to control-plane
srv_policy	(Optional) policy-map attached to control-plane

Command Mode

/exec

show copyright

show copyright [ __readonly__ { <content> } ]

Syntax Description


show	Show running system information
copyright	Copyright information
__readonly__	(Optional)
content	(Optional) Copyrigh information

Command Mode

/exec

show cores

show cores [ vdc-all | { vdc [ <e-vdc2> | <vdc-id> ] } ] [ __readonly__ { [ TABLE_cores <vdc_id> <module_id> <instance> <process_name> <pid> <sys_time> ] } ]

Syntax Description


show	Show running system information
cores	show all core dumps for the current vdc
vdc-all	(Optional) show core dumps from all vdcs
vdc	(Optional) show all core dumps for the vdc
__readonly__	(Optional)
TABLE_cores	(Optional)
vdc_id	(Optional) vdc id
module_id	(Optional) module id
instance	(Optional) instance number
process_name	(Optional) name of the process
pid	(Optional) process id
sys_time	(Optional) core generate time
e-vdc2	(Optional) Enter VDC <vdc-id>
vdc-id	(Optional) vdc number

Command Mode

/exec

show crypto ca certificates

show crypto ca certificates [ __readonly__ [ { TABLE_ca_certificates <trustpoint> [ <certificate> ] [ { TABLE_ca_cert_chains <index> <ca_certificate> } ] } ] ]

Syntax Description


show	Show running system information
crypto	show crypto configuration
ca	show trustpoint configuration
certificates	show various certificates
__readonly__	(Optional)
TABLE_ca_certificates	(Optional) Table of CA certificates
trustpoint	(Optional) Trustpoint name
certificate	(Optional) Certificate
TABLE_ca_cert_chains	(Optional) Table of CA certificates in chain
index	(Optional) CA Certificate Index
ca_certificate	(Optional) CA certificate

Command Mode

/exec

show crypto ca certificates

show crypto ca certificates <s0> [ __readonly__ { Trustpoint <trustpoint> } [ { Certificate <certificate> } ] [ { TABLE_ca_cert_chains <index> <ca_certificate> } ] ]

Syntax Description


show	Show running system information
crypto	show crypto configuration
ca	show trustpoint configuration
certificates	show various certificates
s0	trustpoint label
__readonly__	(Optional)
Trustpoint	(Optional) Trustpoint
trustpoint	(Optional) Trustpoint
Certificate	(Optional) Certificate
certificate	(Optional) Certificate
TABLE_ca_cert_chains	(Optional) Table of CA certificates in chain
index	(Optional) CA Certificate Index
ca_certificate	(Optional) CA certificate

Command Mode

/exec

show crypto ca certstore

show crypto ca certstore [ __readonly__ { certstore_lookup <lookup_type> } ]

Syntax Description


show	Show running system information
crypto	Show crypto configuration
ca	show crypto ca configuration
certstore	Show the configured certstore
__readonly__	(Optional)
certstore_lookup	(Optional) Certificate strore lookup
lookup_type	(Optional) Lookup type

Command Mode

/exec

show crypto ca crl

show crypto ca crl <s0> [ __readonly__ { Trustpoint <trustpoint> } [ { CRL <crl> } ] ]

Syntax Description


show	Show running system information
crypto	show crypto configuration
ca	show trustpoint configuration
crl	show CRL
s0	trustpoint label
__readonly__	(Optional)
Trustpoint	(Optional) Trustpoint
trustpoint	(Optional) Trustpoint
CRL	(Optional) Certificate Revocation List
crl	(Optional) Certificate Revocation List

Command Mode

/exec

show crypto ca remote-certstore

show crypto ca remote-certstore [ __readonly__ { remote_cert_store <rem_cert_store> } [ { crl_timer <crltimer> } { ldap_server_group <ldap_server_grp> } ] ]

Syntax Description


show	Show running system information
crypto	Show crypto configuration
ca	show crypto ca configuration
remote-certstore	Show remote certstore configuration
__readonly__	(Optional)
remote_cert_store	(Optional) Remote cert store
rem_cert_store	(Optional) Remote certificate store
crl_timer	(Optional) CRL timer
crltimer	(Optional) CRL timer
ldap_server_group	(Optional) LDAP Server Group
ldap_server_grp	(Optional) LDAP Server Group

Command Mode

/exec

show crypto ca trustpoints

show crypto ca trustpoints [ __readonly__ [ { TABLE_ca_truspoints <trustpoint> <key-pair> [ { TABLE_revocation_methods <revocation-method> } ] [ <ocsp-url> ] } ] ]

Syntax Description


show	Show running system information
crypto	show crypto configuration
ca	show trustpoint configuration
trustpoints	show trustpoint configuration
__readonly__	(Optional)
trustpoint	(Optional) Trustpoint
key-pair	(Optional) Key pair
TABLE_revocation_methods	(Optional) Table of revocation methods
revocation-method	(Optional) Revocation mehtod
ocsp-url	(Optional) OCSP URL
TABLE_ca_truspoints	(Optional) Table of CA trustpoints

Command Mode

/exec

show crypto certificatemap

show crypto certificatemap [ __readonly__ [ { TABLE_certmap <map_name> <subject_name> <alternate_email> <alternate_upn> } ] ]

Syntax Description


show	Show running system information
crypto	show crypto configuration
certificatemap	show certificatemap filters
__readonly__	(Optional)
TABLE_certmap	(Optional) Table of Certificate Map
map_name	(Optional) Map name
subject_name	(Optional) Subject name
alternate_email	(Optional) Alternate Email
alternate_upn	(Optional) Alternate UPN

Command Mode

/exec

show crypto key mypubkey rsa

show crypto key mypubkey rsa [ __readonly__ [ { TABLE_rsa_keys <key_label> <key_size> <exportable> <err_string> } ] ]

Syntax Description


show	Show running system information
crypto	show crypto configuration
key	show key configuration
mypubkey	show my public keys configuration
rsa	show my rsa public keys configuration
__readonly__	(Optional)
TABLE_rsa_keys	(Optional) Table of RSA keys
key_label	(Optional) Key Lable
key_size	(Optional) Key size
exportable	(Optional) Exportable
err_string	(Optional) Error String

Command Mode

/exec

show crypto ssh-auth-map

show crypto ssh-auth-map [ __readonly__ [ { TABLE_ssh_auth_map <issuer_name> <map1> [ <map2> ] } ] ]

Syntax Description


show	Show running system information
crypto	show crypto configuration
ssh-auth-map	show mapping filters applied for ssh authentication
__readonly__	(Optional)
TABLE_ssh_auth_map	(Optional) Table of SSH Auth MAP
issuer_name	(Optional) Issuer Name
map1	(Optional) Map 1
map2	(Optional) Map 2

Command Mode

/exec

show cts

show cts [ __readonly__ <device-id> <cache_en> <num-dot1x> <num-man> <sgt> ]

Syntax Description


cts	Show CTS global configuration
__readonly__	(Optional)
device-id	(Optional) name
cache_en	(Optional) enable/disable
num-dot1x	(Optional) number of interfaces in dot1x mode
num-man	(Optional) number of interfaces in manual mode
sgt	(Optional)

Command Mode

/exec

show current

Syntax Description


show	Display region configurations
current	Display mst configuration currently used

Command Mode

/exec/configure/spanning-tree/mst/configuration

Bias-Free Language

Results

Chapter: C Show Commands

C Show Commands

show callhome

show callhome destination-profile

show callhome destination-profile profile

show callhome destination-profile profile CiscoTAC-1

show callhome destination-profile profile full-txt-destination

show callhome destination-profile profile short-txt-destination

show callhome transport-email

show callhome transport

show callhome user-def-cmds

show catena

show catena analytics

show cdp

show cdp all

show cdp global

show cdp neighbors

show cdp neighbors detail

show cdp traffic interface2

show cfs application

show cfs lock

show cfs merge status

show cfs peers

show cfs regions

show cfs remote-app vsan domain

show cfs remote-switches vsan

show cfs static peers

show cfs status

show checkpoint

show checkpoint

show checkpoint summary

show class-map

show class-map type control-plane

show class-map type network-qos

show class-map type psp

show cli alias

show cli dynamic-cmd

show cli dynamic integers

show cli dynamic strings

show cli history

show cli interface table

show cli list

show cli registry

show cli syntax

show cli variables

show clock

show clock utc

show config-profile

show config-profile applied

show config-replace log exec

show config-replace status

show config-template

show configuration session

show configuration session

show configuration session global-info

show configuration session nx-api rest

show configuration session nx-yang json

show configuration session status

show configuration session summary

show configuration session vsh

show consistency-checker l2 multicast group source vlan

show consistency-checker l3 multicast group source vrf

show consistency-checker link-state fabric-ieth

show consistency-checker vxlan l3-route vrf

show controller accounting log

show copp status

show copyright

show cores

show crypto ca certificates

show crypto ca certificates

show crypto ca certstore

show crypto ca crl

show crypto ca remote-certstore

show crypto ca trustpoints

show crypto certificatemap

show crypto key mypubkey rsa

show crypto ssh-auth-map