D Show Commands

show dampening interface

show dampening interface [ __readonly__ { <DampenedInterfaceCount> <SuppressedInterfaceCount> } ]

Syntax Description

show

Show running system information

dampening

Display dampening information

interface

Display interface dampening general information

__readonly__

(Optional)

DampenedInterfaceCount

(Optional) Count of interfaces configured with dampening

SuppressedInterfaceCount

(Optional) Count of interfaces in suppressed state

Command Mode

  • /exec

show diagnostic bootup level

show diagnostic bootup level [ __readonly__ <bootup_level> ]

Syntax Description

show

Show running system information

diagnostic

Diagnostic commands

bootup

Show diagnostic bootup information

level

Show diagnostic bootup level information

__readonly__

(Optional)

bootup_level

(Optional) Bootup level

Command Mode

  • /exec

show diagnostic description module test all

show diagnostic description module <module> test { all | <name> | <test-id> } [ __readonly__ { TABLE_desc <testname> <testdesc> } ]

Syntax Description

show

Show running system information

diagnostic

Diagnostic commands

description

Show diagnostic test desc

module

Module keyword

module

Module Number

test

Diagnostic test selection

all

Select all test ID

name

Test name

test-id

__readonly__

(Optional)

TABLE_desc

(Optional) Table of test description

testname

(Optional) Test name

testdesc

(Optional) Description of the test

Command Mode

  • /exec

show diagnostic events

show diagnostic events [ error | info ] [ __readonly__ { TABLE_events <event_text> } ]

Syntax Description

show

Show running system information

diagnostic

Diagnostic commands

events

Diagnostic events

error

(Optional) Error event-type

info

(Optional) Information event-type

__readonly__

(Optional)

TABLE_events

(Optional) list of events logged

event_text

(Optional) Text of one event

Command Mode

  • /exec

show diagnostic result module

show diagnostic result module <module> [ test { <name> | <test-id> } ] { [ detail ] | [ statistics ] } [ __readonly__ <module_id> <curr_diag_level> <module_name> [ <bootup_diag_level> ] [ { TABLE_TestStat <stat_testid> <stat_testname> { TABLE_StatDetail <port_no> <packet_tx> <packet_rx> <packet_loss> } } ] [ { TABLE_Test <test_id> <testname> [ <testresult> ] [ { <passed_ports> <failed_ports> <incomplete_ports> <untested_ports> <aborted_ports> <err_disabled_ports> } ] [ { <err_code> <total_run_count> <last_execution_time> <first_failure_time> <last_failure_time> <last_pass_time> <total_fail_count> <consequtive_fail_count> <last_fail_reason> <next_execution_time> } ] } ] ]

Syntax Description

show

Show running system information

diagnostic

Diagnostic commands

result

Show diagnostic test result

module

Module keyword

module

Module number

test

(Optional) Diagnostic test selection

test-id

(Optional)

name

(Optional) Test name

detail

(Optional) Detailed result

statistics

(Optional) Result statistics

__readonly__

(Optional)

module_id

(Optional) Module ID

curr_diag_level

(Optional) Current diag level

module_name

(Optional) Module name

bootup_diag_level

(Optional) Diagnostic level at bootup

TABLE_TestStat

(Optional) Statistics table

stat_testid

(Optional) Test id

stat_testname

(Optional) Test name

TABLE_StatDetail

(Optional) Table stats detail

port_no

(Optional) Port Number

packet_tx

(Optional) Packet Tx

packet_rx

(Optional) Packet Rx

packet_loss

(Optional) Packet lost

TABLE_Test

(Optional) Table of tests in module

test_id

(Optional) Test id of tests

testname

(Optional) Test name

testresult

(Optional) Test Results

passed_ports

(Optional) List passed ports

failed_ports

(Optional) List failed ports

incomplete_ports

(Optional) List of Imcompletly tested ports

untested_ports

(Optional) List of untested ports

aborted_ports

(Optional) List of aborted ports

err_disabled_ports

(Optional) List error disabled ports

err_code

(Optional) Error code

total_run_count

(Optional) Total run count

last_execution_time

(Optional) Last execution time

first_failure_time

(Optional) First test failure time

last_failure_time

(Optional) Last test failure time

last_pass_time

(Optional) Last test pass time

total_fail_count

(Optional) Total fail count

consequtive_fail_count

(Optional) Consequetive failure count

last_fail_reason

(Optional) Last failure reason

next_execution_time

(Optional) Next test execution time

Command Mode

  • /exec

show diagnostic result module all

show diagnostic result module all [ detail ] [ __readonly__ { TABLE_Module <module_id> <curr_diag_level> <module_name> [ <bootup_diag_level> ] { TABLE_Test <test_id> <testname> [ <testresult> ] [ { <passed_ports> <failed_ports> <incomplete_ports> <untested_ports> <aborted_ports> <err_disabled_ports> } ] [ { <err_code> <total_run_count> <last_execution_time> <first_failure_time> <last_failure_time> <last_pass_time> <total_fail_count> <consequtive_fail_count> <last_fail_reason> <next_execution_time> } ] } } ]

Syntax Description

show

Show running system information

diagnostic

Diagnostic commands

result

Show diagnostic test result

module

Module keyword

all

Select all test ID

detail

(Optional) Detailed result

__readonly__

(Optional)

TABLE_Module

(Optional) Table of modules

module_id

(Optional) Module ID

curr_diag_level

(Optional) Current diag level

module_name

(Optional) Module name

bootup_diag_level

(Optional) Diagnostic level at bootup

TABLE_Test

(Optional) Table of tests in module

test_id

(Optional) Test id of tests

testname

(Optional) Test name

testresult

(Optional) Test Results

passed_ports

(Optional) List passed ports

failed_ports

(Optional) List failed ports

incomplete_ports

(Optional) List of Imcompletly tested ports

untested_ports

(Optional) List of untested ports

aborted_ports

(Optional) List of aborted ports

err_disabled_ports

(Optional) List error disabled ports

err_code

(Optional) Error code

total_run_count

(Optional) Total run count

last_execution_time

(Optional) Last execution time

first_failure_time

(Optional) First test failure time

last_failure_time

(Optional) Last test failure time

last_pass_time

(Optional) Last test pass time

total_fail_count

(Optional) Total fail count

consequtive_fail_count

(Optional) Consequetive failure count

last_fail_reason

(Optional) Last failure reason

next_execution_time

(Optional) Next test execution time

Command Mode

  • /exec

show diff rollback-patch

show diff rollback-patch { src-checkpoint <chkpoint_name> | src-running-cfg | src-startup-cfg | src-file <srcfile_uri> } { dst-checkpoint <chkpoint_name> | dst-running-cfg | dst-startup-cfg | dst-file <dstfile_uri> } [ __readonly__ [ <patch_entry> ] + ]

Syntax Description

show

Show running system information

diff

Show diff between configuration files or checkpoints

rollback-patch

Show rollback patch between configuration files or checkpoints

src-checkpoint

Use checkpoint as source configuration

chkpoint_name

Checkpoint name

src-running-cfg

Use running configuration as source

src-startup-cfg

Use startup configuration as source

src-file

Src Checkpoint file

srcfile_uri

Src Checkpoint file path

dst-checkpoint

Use checkpoint as destination configuration

chkpoint_name

Checkpoint name

dst-running-cfg

Use running configuration as destination

dst-startup-cfg

Use startup configuration as destination

dst-file

Dst Checkpoint file

dstfile_uri

Src Checkpoint file path

__readonly__

(Optional) Read only

patch_entry

(Optional) rollback patch entry

Command Mode

  • /exec

show dot1q-tunnel

show dot1q-tunnel [ __readonly__ TABLE_interface <interface> ]

Syntax Description

show

Show running system information

dot1q-tunnel

Show if port mode is dot1q-tunnel

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

Command Mode

  • /exec

show dot1q-tunnel interface

show dot1q-tunnel interface <ifid_eth_dot1q_tunnel> [ __readonly__ TABLE_interface <interface> ]

Syntax Description

show

Show running system information

dot1q-tunnel

Show if port mode is dot1q-tunnel

interface

Show interface status and information

ifid_eth_dot1q_tunnel

Enter interface type and number in module/slot format

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

Command Mode

  • /exec

show dot1x

show dot1x [ __readonly__ <sys_auth_ctrl> <proto_ver> <mac_move> ]

Syntax Description

dot1x

dot1x configuration commands

__readonly__

(Optional)

sys_auth_ctrl

(Optional) show system auth control

proto_ver

(Optional) show protocol version

mac_move

(Optional) show mac move

Command Mode

  • /exec

show dot1x all

show dot1x all [ __readonly__ <sys_auth_ctrl> <proto_ver> <mac_move> TABLE_all <if_index> TABLE_allpae <pae_type> [ <port_control> ] [ <host_mode> ] [ <quiet_period> ] [ <inactivity_period> ] [ <tx_period> ] [ <max_req> ] [ <reauth> ] [ <rate_limit_period> ] [ <supp_timeout> ] [ <server_timeout> ] [ <reauth_server> ] [ <reauth_period> ] [ <reauth_max> ] [ <mac_auth_bypass> ] [ <start_period> ] [ <auth_period> ] [ <held_period> ] [ <max_start> ] ]

Syntax Description

dot1x

dot1x configuration commands

all

Show information for all interfaces

__readonly__

(Optional)

TABLE_all

(Optional)

TABLE_allpae

(Optional)

if_index

(Optional) Interface Index

sys_auth_ctrl

(Optional) Show System Auth Control

proto_ver

(Optional) Show Protocol Version

mac_move

(Optional) Show Mac Move

pae_type

(Optional) Show PAE Type

port_control

(Optional) Show Port Control

host_mode

(Optional) Show Host Mode

reauth

(Optional) Show Reauth Enabled Status

quiet_period

(Optional) Show Quiet Period

inactivity_period

(Optional) Show Inactivity Period

server_timeout

(Optional) Show Server Timeout

supp_timeout

(Optional) Show Supp Timeout

reauth_period

(Optional) Show Reauth Period

reauth_max

(Optional) Show Reauth Max

max_req

(Optional) Show Max Req

tx_period

(Optional) Show Tx Period

rate_limit_period

(Optional) Show Rate Limit Period

reauth_server

(Optional) Show Reauth Server Enabled Status

mac_auth_bypass

(Optional) Show MAC Auth Bypass Enabled Status

start_period

(Optional) Show Supplicant Start Period

auth_period

(Optional) Show Supplicant Auth Period

held_period

(Optional) Show Supplicant Held Period

max_start

(Optional) Show Supplicant Max Start

Command Mode

  • /exec

show dot1x all details

show dot1x all details [ __readonly__ <sys_auth_ctrl> <proto_ver> <mac_move> TABLE_alldetail <if_index> TABLE_allpaedetail <pae_type> [ <port_control> ] [ <host_mode> ] [ <quiet_period> ] [ <inactivity_period> ] [ <tx_period> ] [ <max_req> ] [ <reauth> ] [ <rate_limit_period> ] [ <supp_timeout> ] [ <server_timeout> ] [ <reauth_server> ] [ <reauth_period> ] [ <reauth_max> ] [ <mac_auth_bypass> ] [ <no_of_clients> ] [ <port_status_no_clients> ] [ { TABLE_if_auth_clients [ <supp_mac_addr> ] [ <auth_domain> ] [ <auth_sm_state> ] [ <auth_bend_sm_state> ] [ <port_status> ] [ <authentication_method> ] [ <authenticated_by> ] [ <reauth_period_client> ] [ <reauth_action> ] [ <time_to_next_reauth> ] [ <auth_vlan> ] } ] [ <start_period> ] [ <auth_period> ] [ <held_period> ] [ <max_start> ] [ <no_of_supp_clients> ] [ <auth_mac_addr> ] [ <supp_sm_state> ] [ <supp_bend_sm_state> ] [ <supp_port_status> ] ]

Syntax Description

dot1x

dot1x configuration commands

all

Show information for all interfaces

details

802.1x details

__readonly__

(Optional)

TABLE_alldetail

(Optional)

TABLE_allpaedetail

(Optional)

TABLE_if_auth_clients

(Optional)

if_index

(Optional) Interface Index

sys_auth_ctrl

(Optional) Show System Auth Control

proto_ver

(Optional) Show Protocol Version

mac_move

(Optional) Show Mac Move

pae_type

(Optional) Show PAE Type

port_control

(Optional) Show Port Control

host_mode

(Optional) Show Host Mode

reauth

(Optional) Show Reauth Enabled Status

quiet_period

(Optional) Show Quiet Period

server_timeout

(Optional) Show Server Timeout

supp_timeout

(Optional) Show Supp Timeout

reauth_period

(Optional) Show Reauth Period

reauth_max

(Optional) Show Reauth Max

max_req

(Optional) Show Max Req

tx_period

(Optional) Show Tx Period

rate_limit_period

(Optional) Show Rate Limit Period

inactivity_period

(Optional) Show Inactivity Period

reauth_server

(Optional) Show Reauth Server Enabled Status

mac_auth_bypass

(Optional) Show MAC Auth Bypass Enabled Status

no_of_clients

(Optional) Show Supplicant Clients

port_status_no_clients

(Optional) Show Port Status if there are no clients

supp_mac_addr

(Optional) Show Supplicant MAC Address

auth_domain

(Optional) Show Supplicant Auth Domain

auth_sm_state

(Optional) Show Authenticator SM State

auth_bend_sm_state

(Optional) Show Authenticator Backend State

port_status

(Optional) Show Port Status

authentication_method

(Optional) show authentication method

authenticated_by

(Optional) show authenticated by

reauth_period_client

(Optional) Show Reauth Period

reauth_action

(Optional) Show Reauthentication Action

time_to_next_reauth

(Optional) Show Time to Next Reauth

auth_vlan

(Optional) Show Vlan

start_period

(Optional) Show Supplicant Start Period

auth_period

(Optional) Show Supplicant Auth Period

held_period

(Optional) Show Supplicant Held Period

max_start

(Optional) Show Supplicant Max Start

no_of_supp_clients

(Optional) Show Supplicant Clients

auth_mac_addr

(Optional) Show Authenticator MAC Address

supp_sm_state

(Optional) Show Supplicant SM State

supp_bend_sm_state

(Optional) Show Supplicant Backend SM State

supp_port_status

(Optional) Show Supplicant Port Status

Command Mode

  • /exec

show dot1x all statistics

show dot1x all statistics [ __readonly__ TABLE_allstat <if_index> TABLE_allpaestat <pae_type> [ <rxstart> ] [ <rxlogoff> ] [ <rxresp> ] [ <rxrespid> ] [ <rxinvalid> ] [ <rxlenerr> ] [ <rxtotal> ] [ <txreq> ] [ <txreqid> ] [ <txtotal> ] [ <rxversion> ] [ <lastrxsourcemac> ] [ <rxreq> ] [ <rxsuppinvalid> ] [ <rxsupplenerr> ] [ <rxsupptotal> ] [ <txstart> ] [ <txlogoff> ] [ <txresp> ] [ <txsupptotal> ] [ <rxsuppversion> ] [ <lastrxsrcmac> ] ]

Syntax Description

dot1x

dot1x configuration commands

all

Show information for all interfaces

statistics

802.1x statistics

__readonly__

(Optional)

TABLE_allstat

(Optional)

TABLE_allpaestat

(Optional)

if_index

(Optional) Interface Index

pae_type

(Optional) Show PAE Type

rxstart

(Optional) Show Received EAPOL-Start

rxlogoff

(Optional) Show Received EAPOL-Logoff

rxresp

(Optional) Show Received EAP-Response

rxrespid

(Optional) Show Received EAP-ResponseID

rxinvalid

(Optional) Show Received Invalid EAPOL Frame

rxlenerr

(Optional) Show Received EAPOL Bad Length Frame

rxtotal

(Optional) Show Received Total EAPOL Frame

txreq

(Optional) Show Transmitted EAP-Request

txreqid

(Optional) Show Transmitted EAP-RequestID

txtotal

(Optional) Show Transmitted Total EAPOL Frame

rxversion

(Optional) Show Received EAPOL Version

lastrxsourcemac

(Optional) Show Last Source MAC

rxreq

(Optional) Show Received EAP-Request

rxsuppinvalid

(Optional) Show received Invalid EAPOL Frame

rxsupplenerr

(Optional) Show received EAPOL Bad Length Frame

rxsupptotal

(Optional) Show Received Total EAPOL Frame

txstart

(Optional) Show transmitted EAPOL-Start

txlogoff

(Optional) Show transmitted EAPOL-Logoff

txresp

(Optional) Show transmitted EAP-Response

txsupptotal

(Optional) Show transmitted Total EAPOL Frame

rxsuppversion

(Optional) Show Received EAPOL Version

lastrxsrcmac

(Optional) Show Last Source MAC received

Command Mode

  • /exec

show dot1x all summary

show dot1x all summary [ __readonly__ TABLE_allsummary <if_index> <pae_type> [ <port_status_no_clients> ] [ { TABLE_if_auth_clients [ <auth_mac_addr> ] [ <port_status> ] } ] ]

Syntax Description

dot1x

dot1x configuration commands

all

Show information for all interfaces

summary

802.1x summary

__readonly__

(Optional)

TABLE_allsummary

(Optional)

TABLE_if_auth_clients

(Optional)

if_index

(Optional) Interface Index

pae_type

(Optional) Show PAE Type

auth_mac_addr

(Optional) Show Authenticator MAC Address

port_status_no_clients

(Optional) Show Port Status if there are no clients

port_status

(Optional) Show Port Status

Command Mode

  • /exec

show dot1x interface

{ show dot1x interface <if> [ __readonly__ <if_index> <pae_type> [ <port_control> ] [ <host_mode> ] [ <quiet_period> ] [ <inactivity_period> ] [ <tx_period> ] [ <max_req> ] [ <reauth> ] [ <rate_limit_period> ] [ <supp_timeout> ] [ <server_timeout> ] [ <reauth_server> ] [ <reauth_period> ] [ <reauth_max> ] [ <mac_auth_bypass> ] [ <start_period> ] [ <auth_period> ] [ <held_period> ] [ <max_start> ] ] } | { show dot1x interface <if> details [ __readonly__ <if_index_detail> <pae_type_detail> [ <port_control_detail> ] [ <host_mode_detail> ] [ <quiet_period_detail> ] [ <inactivity_period_detail> ] [ <tx_period_detail> ] [ <max_req_detail> ] [ <reauth_detail> ] [ <rate_limit_period_detail> ] [ <supp_timeout_detail> ] [ <server_timeout_detail> ] [ <reauth_server_detail> ] [ <reauth_period_detail> ] [ <reauth_max_detail> ] [ <mac_auth_bypass_detail> ] [ <no_of_clients> ] [ <port_status_no_clients_detail> ] [ { TABLE_if_auth_clients_detail [ <supp_mac_addr_detail> ] [ <auth_domain> ] [ <auth_sm_state> ] [ <auth_bend_sm_state> ] [ <port_status> ] [ <authentication_method> ] [ <authenticated_by> ] [ <reauth_period_client> ] [ <reauth_action> ] [ <time_to_next_reauth> ] [ <auth_vlan> ] } ] [ <start_period_detail> ] [ <auth_period_detail> ] [ <held_period_detail> ] [ <max_start_detail> ] [ <no_of_supp_clients> ] [ <auth_mac_addr_detail> ] [ <supp_sm_state> ] [ <supp_bend_sm_state> ] [ <supp_port_status> ] ] } | { show dot1x interface <if> statistics [ __readonly__ <if_index_stat> <pae_type_stat> [ <rxstart> ] [ <rxlogoff> ] [ <rxresp> ] [ <rxrespid> ] [ <rxinvalid> ] [ <rxlenerr> ] [ <rxtotal> ] [ <txreq> ] [ <txreqid> ] [ <txtotal> ] [ <rxversion> ] [ <lastrxsourcemac> ] [ <rxreq> ] [ <rxsuppinvalid> ] [ <rxsupplenerr> ] [ <rxsupptotal> ] [ <txstart> ] [ <txlogoff> ] [ <txresp> ] [ <txsupptotal> ] [ <rxsuppversion> ] [ <lastrxsrcmac> ] ] } | { show dot1x interface <if> summary [ __readonly__ <if_index_summary> <pae_type_summary> [ <port_status_no_clients_summary> ] [ { TABLE_if_auth_clients_summary [ <auth_mac_addr> ] [ <port_status_summary> ] } ] [ <supp_mac_addr> ] [ <supp_port_status_summary> ] ] }

Syntax Description

dot1x

dot1x configuration commands

if

details

802.1x details

statistics

802.1x statistics

summary

802.1x summary

TABLE_if_auth_clients_detail

(Optional)

TABLE_if_auth_clients_summary

(Optional)

__readonly__

(Optional)

if_index

(Optional) Interface Index

if_index_detail

(Optional) Interface Index

if_index_stat

(Optional) Interface Index

if_index_summary

(Optional) Interface Index

pae_type

(Optional) Show PAE Type

port_control

(Optional) Show Port Control

host_mode

(Optional) Show Host Mode

reauth

(Optional) Show Reauth Enabled Status

quiet_period

(Optional) Show Quiet Period

inactivity_period

(Optional) Show Inactivity Period

server_timeout

(Optional) Show Server Timeout

supp_timeout

(Optional) Show Supp Timeout

reauth_period

(Optional) Show Reauth Period

reauth_max

(Optional) Show Reauth Max

max_req

(Optional) Show Max Req

tx_period

(Optional) Show Tx Period

rate_limit_period

(Optional) Show Rate Limit Period

start_period

(Optional) Show Supplicant Start Period

auth_period

(Optional) Show Supplicant Auth Period

held_period

(Optional) Show Supplicant Held Period

max_start

(Optional) Show Supplicant Max Start

reauth_server

(Optional) Show Reauth Server Enabled Status

mac_auth_bypass

(Optional) Show MAC Auth Bypass Enabled Status

pae_type_detail

(Optional) Show PAE Type

port_control_detail

(Optional) Show Port Control

host_mode_detail

(Optional) Show Host Mode

reauth_detail

(Optional) Show Reauth Enabled Status

quiet_period_detail

(Optional) Show Quiet Period

inactivity_period_detail

(Optional) Show Inactivity Period

server_timeout_detail

(Optional) Show Server Timeout

supp_timeout_detail

(Optional) Show Supp Timeout

reauth_period_detail

(Optional) Show Reauth Period

reauth_max_detail

(Optional) Show Reauth Max

max_req_detail

(Optional) Show Max Req

tx_period_detail

(Optional) Show Tx Period

rate_limit_period_detail

(Optional) Show Rate Limit Period

reauth_server_detail

(Optional) Show Reauth Server Enabled Status

mac_auth_bypass_detail

(Optional) Show MAC Auth Bypass Enabled Status

no_of_clients

(Optional) Show Supplicant Clients

port_status_no_clients_detail

(Optional) Show Port Status if there are no clients

supp_mac_addr_detail

(Optional) Show Supplicant MAC Address

auth_domain

(Optional) Show Supplicant Auth Domain

auth_sm_state

(Optional) Show Authenticator SM State

auth_bend_sm_state

(Optional) Show Authenticator Backend State

port_status

(Optional) Show Port Status

authentication_method

(Optional) show authentication method

authenticated_by

(Optional) show authenticated by

reauth_period_client

(Optional) Show Reauth Period

reauth_action

(Optional) Show Reauthentication Action

time_to_next_reauth

(Optional) Show Time to Next Reauth

auth_vlan

(Optional) Show vlan

start_period_detail

(Optional) Show Supplicant Start Period

auth_period_detail

(Optional) Show Supplicant Auth Period

held_period_detail

(Optional) Show Supplicant Held Period

max_start_detail

(Optional) Show Supplicant Max Start

no_of_supp_clients

(Optional) Show Supplicant Clients

auth_mac_addr_detail

(Optional) Show Authenticator MAC Address

supp_sm_state

(Optional) Show Supplicant SM State

supp_bend_sm_state

(Optional) Show Supplicant Backend SM State

supp_port_status

(Optional) Show Supplicant Port Status

pae_type_stat

(Optional) Show PAE Type

rxstart

(Optional) Show Received EAPOL-Start

rxlogoff

(Optional) Show Received EAPOL-Logoff

rxresp

(Optional) Show Received EAP-Response

rxrespid

(Optional) Show Received EAP-ResponseID

rxinvalid

(Optional) Show Received Invalid EAPOL Frame

rxlenerr

(Optional) Show Received EAPOL Bad Length Frame

rxtotal

(Optional) Show Received Total EAPOL Frame

txreq

(Optional) Show Transmitted EAP-Request

txreqid

(Optional) Show Transmitted EAP-RequestID

txtotal

(Optional) Show Transmitted Total EAPOL Frame

rxversion

(Optional) Show Received EAPOL Version

lastrxsourcemac

(Optional) Show Last Source MAC

rxreq

(Optional) Show Received EAP-Request

rxsuppinvalid

(Optional) Show received Invalid EAPOL Frame

rxsupplenerr

(Optional) Show received EAPOL Bad Length Frame

rxsupptotal

(Optional) Show Received Total EAPOL Frame

txstart

(Optional) Show transmitted EAPOL-Start

txlogoff

(Optional) Show transmitted EAPOL-Logoff

txresp

(Optional) Show transmitted EAP-Response

txsupptotal

(Optional) Show transmitted Total EAPOL Frame

rxsuppversion

(Optional) Show Received EAPOL Version

lastrxsrcmac

(Optional) Show Last Soouce MAC received

pae_type_summary

(Optional) Show PAE Type

port_status_no_clients_summary

(Optional) Show Port Status if there are no clients

port_status_summary

(Optional) Show Port Status

supp_port_status_summary

(Optional) Show Port Status

supp_mac_addr

(Optional) Show Supplicant Client MAC Address

auth_mac_addr

(Optional) Show Auth Client MAC Address

Command Mode

  • /exec

show dot1x interface client statistics

show dot1x interface <if> client statistics [ __readonly__ <if_index_stat> <pae_type_stat> [ { TABLE_mac_address [ <macaddr> ] [ <rxstart> ] [ <rxlogoff> ] [ <rxresp> ] [ <rxrespid> ] [ <rxinvalid> ] [ <rxlenerr> ] [ <rxtotal> ] [ <txreq> ] [ <txreqid> ] [ <txtotal> ] [ <rxversion> ] [ <lastrxsourcemac> ] } ] [ <spurious_rxstart> ] [ <spurious_rxlogoff> ] [ <spurious_rxresp> ] [ <spurious_rxrespid> ] [ <spurious_rxinvalid> ] [ <spurious_rxlenerr> ] [ <spurious_rxtotal> ] [ <spurious_txreq> ] [ <spurious_txreqid> ] [ <spurious_txtotal> ] [ <spurious_rxversion> ] [ <spurious_lastrxsourcemac> ] ]

Syntax Description

dot1x

dot1x configuration commands

if

client

802.1x client

statistics

802.1x statistics

__readonly__

(Optional)

TABLE_mac_address

(Optional)

if_index_stat

(Optional) Interface Index

pae_type_stat

(Optional) Show PAE Type

macaddr

(Optional) mac-address of the client

rxstart

(Optional) Show Received EAPOL-Start

rxlogoff

(Optional) Show Received EAPOL-Logoff

rxresp

(Optional) Show Received EAP-Response

rxrespid

(Optional) Show Received EAP-ResponseID

rxinvalid

(Optional) Show Received Invalid EAPOL Frame

rxlenerr

(Optional) Show Received EAPOL Bad Length Frame

rxtotal

(Optional) Show Received Total EAPOL Frame

txreq

(Optional) Show Transmitted EAP-Request

txreqid

(Optional) Show Transmitted EAP-RequestID

txtotal

(Optional) Show Transmitted Total EAPOL Frame

rxversion

(Optional) Show Received EAPOL Version

lastrxsourcemac

(Optional) Show Last Source MAC

spurious_rxstart

(Optional) Show Received EAPOL-Start of spurious macs

spurious_rxlogoff

(Optional) Show Received EAPOL-Logoff of spurious macs

spurious_rxresp

(Optional) Show Received EAP-Response of spurious macs

spurious_rxrespid

(Optional) Show Received EAP-ResponseID of spurious macs

spurious_rxinvalid

(Optional) Show Received Invalid EAPOL Frame of spurious macs

spurious_rxlenerr

(Optional) Show Received EAPOL Bad Length Frame of spurious macs

spurious_rxtotal

(Optional) Show Received Total EAPOL Frame of spurious macs

spurious_txreq

(Optional) Show Transmitted EAP-Request of spurious macs

spurious_txreqid

(Optional) Show Transmitted EAP-RequestID of spurious macs

spurious_txtotal

(Optional) Show Transmitted Total EAPOL Frame of spurious macs

spurious_rxversion

(Optional) Show Received EAPOL Version of spurious macs

spurious_lastrxsourcemac

(Optional) Show Last Source MAC of spurious macs

Command Mode

  • /exec

show dot1x interface client statistics address

show dot1x interface <if> client statistics address <mac-address> [ __readonly__ <if_index_stat> <pae_type_stat> [ <rxstart> ] [ <rxlogoff> ] [ <rxresp> ] [ <rxrespid> ] [ <rxinvalid> ] [ <rxlenerr> ] [ <rxtotal> ] [ <txreq> ] [ <txreqid> ] [ <txtotal> ] [ <rxversion> ] [ <lastrxsourcemac> ] ]

Syntax Description

dot1x

dot1x configuration commands

if

client

802.1x client

statistics

802.1x statistics

address

802.1x client address

mac-address

mac address EE:EE:EE:EE:EE:EE

__readonly__

(Optional)

if_index_stat

(Optional) Interface Index

pae_type_stat

(Optional) Show PAE Type

rxstart

(Optional) Show Received EAPOL-Start

rxlogoff

(Optional) Show Received EAPOL-Logoff

rxresp

(Optional) Show Received EAP-Response

rxrespid

(Optional) Show Received EAP-ResponseID

rxinvalid

(Optional) Show Received Invalid EAPOL Frame

rxlenerr

(Optional) Show Received EAPOL Bad Length Frame

rxtotal

(Optional) Show Received Total EAPOL Frame

txreq

(Optional) Show Transmitted EAP-Request

txreqid

(Optional) Show Transmitted EAP-RequestID

txtotal

(Optional) Show Transmitted Total EAPOL Frame

rxversion

(Optional) Show Received EAPOL Version

lastrxsourcemac

(Optional) Show Last Source MAC

Command Mode

  • /exec