H Commands

ha-policy single

ha-policy { single-sup <hap-change> | dual-sup <sw-change> } +

Syntax Description

ha-policy

Change HA policy for this VDC

hap-change

Change HA policy for this VDC

single-sup

Change HA policy for this VDC for single-sup situations

dual-sup

Change HA policy for this VDC for dual-sup situations

sw-change

Set hap policy

Command Mode

  • /exec/configure/vdc

hardware-telemetry fte

[no] hardware-telemetry fte

Syntax Description

hardware-telemetry

Hardware telemetry configuration

fte

Enable/Disable Flow Table Events configuration

Command Mode

  • /exec/configure

hardware-telemetry inband-telemetry

[no] hardware-telemetry inband-telemetry

Syntax Description

hardware-telemetry

Hardware telemetry configuration

inband-telemetry

Enable/Disable inband telemetry configuration

Command Mode

  • /exec/configure

hardware-telemetry postcard-telemetry

[no] hardware-telemetry postcard-telemetry

Syntax Description

hardware-telemetry

Hardware telemetry configuration

postcard-telemetry

Enable/Disable postcard telemetry configuration

Command Mode

  • /exec/configure

hardware-telemetry ssx

[no] hardware-telemetry ssx

Syntax Description

hardware-telemetry

Hardware Telemetry Configurations

ssx

enable Streaming Statistics Exporter Configurations

Command Mode

  • /exec/configure

hardware access-list lou resource threshold

[no] hardware access-list lou resource threshold <threshold>

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

access-list

Access Control List

lou

LOU

resource

hardware resource

threshold

port expansion threshold

threshold

value of threshold

Command Mode

  • /exec/configure

hardware ecmp hash-offset

[no] hardware ecmp hash-offset <value> [ concatenation ] | no hardware ecmp hash-offset

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

ecmp

ECMP configuration

hash-offset

Configure hash offset

value

Hash offset 0-15 non-concatenate mode, 0-63 concatenate mode

concatenation

(Optional) Configure hash concatenation

Command Mode

  • /exec/configure

hardware ecmp hash-polynomial

hardware ecmp hash-polynomial <poly-type> | no hardware ecmp hash-polynomial

Syntax Description

no

Negate a command or set its defaults

hardware

Change hardware usage settings

ecmp

ECMP configuration

hash-polynomial

Configure hash polynomial

poly-type

Polynomial type

Command Mode

  • /exec/configure

hardware ejector enable

[no] hardware ejector enable

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

ejector

Card ejector functionality

enable

enabled means when both ejectors are open, card is powered down

Command Mode

  • /exec/configure

hardware fan-zone raise-speed

[no] hardware fan-zone <fan_zone_id> raise-speed <speed-to-raise>

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

fan-zone

Fan Zone supported in the switch

fan_zone_id

please enter fan zone id whose speed needs to be increased

raise-speed

Speed to be added for current fan zone speed

speed-to-raise

please enter additional fan speed

Command Mode

  • /exec/configure

hardware forwarding l3 resource route non-deterministic

[no] hardware forwarding l3 resource route non-deterministic

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

hardware information

forwarding

forwarding information

l3

Layer-3

resource

hardware resources

route

TCAM capacity to hold prefixes

non-deterministic

extend upto 1M

Command Mode

  • /exec/configure

hardware forwarding unicast trace

[no] hardware forwarding unicast trace

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

forwarding

Hardware forwarding

unicast

Hardware Unicast forwarding

trace

Debug traces

Command Mode

  • /exec/configure

hardware ip glean throttle

[no] hardware ip glean throttle

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware information

ip

IP

glean

Glean

throttle

Throttle

Command Mode

  • /exec/configure

hardware ip glean throttle maximum

{ hardware ip glean throttle maximum <count> } | { no hardware ip glean throttle maximum }

Syntax Description

no

Negate a command or set its defaults

hardware

Hardware information

ip

IP

glean

Glean

throttle

Throttle

maximum

Maximum number of entries

count

Count

Command Mode

  • /exec/configure

hardware ip glean throttle timeout

{ hardware ip glean throttle timeout <timeout-in-sec> } | { no hardware ip glean throttle timeout }

Syntax Description

no

Negate a command or set its defaults

hardware

Hardware information

ip

IP

glean

Glean

throttle

Throttle

timeout

Timeout

timeout-in-sec

Timeout value in seconds (should be multiple of 30, else will be rounded off to nearest boundary)

Command Mode

  • /exec/configure

hardware ipv6 glean throttle

[no] hardware ipv6 glean throttle

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware information

ipv6

IPv6

glean

Glean

throttle

Throttle

Command Mode

  • /exec/configure

hardware ipv6 glean throttle maximum

{ hardware ipv6 glean throttle maximum <count> } | { no hardware ipv6 glean throttle maximum }

Syntax Description

no

Negate a command or set its defaults

hardware

Hardware information

ipv6

IPv6

glean

Glean

throttle

Throttle

maximum

Maximum number of entries

count

Count

Command Mode

  • /exec/configure

hardware ipv6 glean throttle timeout

{ hardware ipv6 glean throttle timeout <timeout-in-sec> } | { no hardware ipv6 glean throttle timeout }

Syntax Description

no

Negate a command or set its defaults

hardware

Hardware information

ipv6

IPv6

glean

Glean

throttle

Throttle

timeout

Timeout

timeout-in-sec

Timeout value in seconds (should be multiple of 30, else will be rounded off to nearest boundary)

Command Mode

  • /exec/configure

hardware module boot-order reverse

[no] hardware module boot-order reverse

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

module

applies on all the modules

boot-order

Configure order of module power-up

reverse

reverse order of module power-up

Command Mode

  • /exec/configure

hardware profile buffer info poll-interval timer

[no] hardware profile buffer info poll-interval [ module <module> ] timer <msec>

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

buffer

Buffer

info

Information

poll-interval

System buffer status polling interval

module

(Optional) Slot/module

module

(Optional) Slot/module number

timer

Polling timer

msec

Polling timer value in msecs

Command Mode

  • /exec/configure

hardware profile buffer info port-threshold threshold

[no] hardware profile buffer info port-threshold [ module <module> ] threshold <value>

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

buffer

Buffer

info

Information

port-threshold

Set port egress buffer usage threshold

module

(Optional) Slot/module

module

(Optional) Slot/module number

threshold

threshold value

value

percentage of maximum usage

Command Mode

  • /exec/configure

hardware profile ecmp auto-recovery threshold

hardware profile ecmp auto-recovery threshold <percentage> | no hardware profile ecmp auto-recovery threshold

Syntax Description

no

Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

ecmp

ECMP settings

auto-recovery

ECMP auto-recovery settings

threshold

ECMP table free percentage threshold for auto-recovery

percentage

Percentage

Command Mode

  • /exec/configure

hardware profile ecmp resilient

[no] hardware profile ecmp resilient

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

ecmp

ECMP settings

resilient

Configure ECMP resilient mode

Command Mode

  • /exec/configure

hardware profile front portmode

hardware profile front portmode <port-mode> | no hardware profile front portmode

Syntax Description

no

Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

front

port 1 QSFP/SFP+ settings

portmode

QSFP or SFP+

port-mode

Configure QSFP/sfp+ port mode

Command Mode

  • /exec/configure

hardware profile ipv6 alpm carve-value

[no] hardware profile ipv6 alpm carve-value <ipv6_alpm_carve_value>

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

profile settings

ipv6

ipv6

alpm

alpm mode

carve-value

carve value

ipv6_alpm_carve_value

maximum entries

Command Mode

  • /exec/configure

hardware profile ipv6 lpm-entries maximum

[no] hardware profile ipv6 lpm-entries maximum <ipv6_lpm_max_entry>

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

profile settings

ipv6

ipv6

lpm-entries

lpm(non-host) entries

maximum

maximum limit

ipv6_lpm_max_entry

maximum entries

Command Mode

  • /exec/configure

hardware profile mpls adjacency-stats bytes

[no] hardware profile mpls adjacency-stats bytes

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

profile

Profile

mpls

MPLS Statistics Mode

adjacency-stats

adjacency-stats

bytes

Bytes Only

Command Mode

  • /exec/configure

hardware profile multicast max-limit

{ hardware profile multicast max-limit <mcast-ent> } | { no hardware profile multicast max-limit }

Syntax Description

no

Negate the command

hardware

Change hardware usage settings

profile

profile settings

multicast

Multicast settings

max-limit

maximum limit for multicast entries

mcast-ent

Mcast Table Entries

Command Mode

  • /exec/configure

hardware profile multicast optimization disable

[no] hardware profile multicast optimization disable

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Set hardware profile

profile

Profile settings

multicast

set multicast profile

optimization

set multicast optimization profile

disable

set the multicast optimization disable profile

Command Mode

  • /exec/configure

hardware profile multicast prefer-source-tree

[no] hardware profile multicast prefer-source-tree [ eternity [ limit <max-limit> ] ]

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

profile settings

multicast

Multicast settings

prefer-source-tree

prefer the source tree

eternity

(Optional) prefer source tree for eternity and not for just 2 minutes

limit

(Optional) Configure a limit for the number of hardware entries used

max-limit

(Optional) Number of (S,G) for which source tree is preferred

Command Mode

  • /exec/configure

hardware profile multicast rpf-check-optimization

{ hardware profile multicast rpf-check-optimization } | { no hardware profile multicast rpf-check-optimization }

Syntax Description

no

Negate the command

hardware

Change hardware usage settings

profile

profile settings

multicast

Multicast settings

rpf-check-optimization

RPF Check optimization on Monticello ASIC

Command Mode

  • /exec/configure

hardware profile multicast service-reflect port

{ hardware profile multicast service-reflect port <port-num> } | { no hardware profile multicast service-reflect }

Syntax Description

no

Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

multicast

Multicast settings

service-reflect

service-reflect settings

port

loopback port

port-num

loopback port-num

Command Mode

  • /exec/configure

hardware profile multicast syslog-threshold

[no] hardware profile multicast syslog-threshold <percentage>

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

profile settings

multicast

Multicast settings

syslog-threshold

MROUTE table syslog threshold

percentage

Percentage (Default is 90)

Command Mode

  • /exec/configure

hardware profile openflow

[no] hardware profile { openflow [ agent default { drop | normal } ] | { tap-aggregation [ l2drop ] } }

Syntax Description

no

(Optional) Negate the command

hardware

Hardware Internal Information

profile

Profile

openflow

Openflow

tap-aggregation

Tap Aggregation

l2drop

(Optional) Drop non IP traffic ingress on mode tap interfaces

agent

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

default

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

drop

(Optional) Drop all frames that miss MAC

normal

(Optional) [default]Flood unknown traffic

Command Mode

  • /exec/configure

hardware profile packet-drop

[no] hardware profile packet-drop

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

Profile settings

packet-drop

Configure Packet Drop parameters

Command Mode

  • /exec/configure

hardware profile pbr ecmp paths

[no] hardware profile pbr ecmp paths <maxpath>

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

pbr

Policy based routing

ecmp

Equal cost multi path

paths

ecmp path

maxpath

Maximum ecmp paths

Command Mode

  • /exec/configure

hardware profile pbr skip-selfip

[no] hardware profile pbr skip-selfip

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

pbr

PBR feature settings

skip-selfip

Configure Skipping PBR for self-ip packets

Command Mode

  • /exec/configure

hardware profile pfc mmu buffer-reservation

[no] hardware profile pfc mmu buffer-reservation <percentage>

Syntax Description

no

(Optional) Negate the command

hardware

Hardware Internal Information

profile

profile settings

pfc

System level priority-flow-control settings

mmu

Hardware memory management unit configuration

buffer-reservation

Shared pool buffer reservation

percentage

Percentage of shared pool buffers to be reserved

Command Mode

  • /exec/configure

hardware profile portmode

{ hardware profile portmode <port-mode> [ 2-tuple ] } | no hardware profile portmode

Syntax Description

no

Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

portmode

QSFP port mode setting

port-mode

Configure QSFP port mode

2-tuple

(Optional) Display QSFP portnames in 2-tuple mode even in 10G mode

Command Mode

  • /exec/configure

hardware profile statistics pstat

[no] hardware profile statistics pstat [ peak ]

Syntax Description

no

(Optional) Negate the command

hardware

Configure hardware profile setting

profile

profile settings

statistics

hardware stats

pstat

Enable Pstat default is instantaneous

peak

(Optional) Peak stats

Command Mode

  • /exec/configure

hardware profile tcam ipv6-sup-tcam match-inner

{ hardware profile tcam ipv6-sup-tcam match-inner } | { no hardware profile tcam ipv6-sup-tcam match-inner }

Syntax Description

no

Negate a command or set its defaults

hardware

Change hardware usage settings

profile

Profile settings

tcam

Configure tcam parameters

ipv6-sup-tcam

IPv6 SUP TCAM parameters

match-inner

match inner payload for tunnel packets

Command Mode

  • /exec/configure

hardware profile tcam region

[no] hardware profile tcam region { <tcam_compat_type> <tcam_compat_size> | ifacl <tcam_compat_size> [ double-wide ] | nat <tcam_compat_size> }

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

profile

profile

tcam

Configure tcam parameters

region

Configure tcam region

ifacl

IPV4 PACL size

double-wide

(Optional) Configure tcam as double wide

nat

NAT size

tcam_compat_type

tcam_compat_size

Enter tcam size

Command Mode

  • /exec/configure

hardware profile tcam region span qualify udf

[no] hardware profile tcam region span qualify udf { <udf_name> } +

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

Profile settings

tcam

Configure tcam parameters

region

Configure tcam region

span

Configure for span region

qualify

Configure UDFs to be qualified for span region

udf

Configure UDF names

udf_name

UDF name

Command Mode

  • /exec/configure

hardware profile tcam region spanv6-l2 qualify udf

[no] hardware profile tcam region spanv6-l2 qualify udf { <udf_name> } +

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

Profile settings

tcam

Configure tcam parameters

region

Configure tcam region

spanv6-l2

Configure for span region

qualify

Configure UDFs to be qualified for span region

udf

Configure UDF names

udf_name

UDF name

Command Mode

  • /exec/configure

hardware profile tcam region spanv6 qualify udf

[no] hardware profile tcam region spanv6 qualify udf { <udf_name> } +

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

Profile settings

tcam

Configure tcam parameters

region

Configure tcam region

spanv6

Configure for span region

qualify

Configure UDFs to be qualified for span region

udf

Configure UDF names

udf_name

UDF name

Command Mode

  • /exec/configure

hardware profile tcam syslog-threshold

{ hardware profile tcam syslog-threshold <percentage> } | { no hardware profile tcam syslog-threshold }

Syntax Description

no

Negate a command or set its defaults

hardware

Change hardware usage settings

profile

Profile settings

tcam

Configure tcam parameters

syslog-threshold

TCAMs syslog threshold

percentage

Percentage

Command Mode

  • /exec/configure

hardware profile ucast6 lpm-65-to-127-max-limit

{ hardware profile ucast6 lpm-65-to-127-max-limit <unicast-ent> } | { no hardware profile ucast6 lpm-65-to-127-max-limit }

Syntax Description

no

Negate the command

hardware

Change hardware usage settings

profile

profile settings

ucast6

unicast ipv6 settings

lpm-65-to-127-max-limit

maximum limit for unicast ipv6 lpm-65-to-127 entries, default is 256

unicast-ent

Unicast ipv6 lpm-65-to-127 Table Entries

Command Mode

  • /exec/configure

hardware profile ucast6 max-limit

{ hardware profile ucast6 max-limit <unicast-ent> } | { no hardware profile ucast6 max-limit }

Syntax Description

no

Negate the command

hardware

Change hardware usage settings

profile

profile settings

ucast6

unicast ipv6 settings

max-limit

maximum limit for unicast ipv6 entries

unicast-ent

Unicast ipv6 Table Entries

Command Mode

  • /exec/configure

hardware profile unicast enable-host-ecmp

[no] hardware profile unicast enable-host-ecmp [ arp-nd | [ ipv4 [ arp ] ] | [ ipv6 [ nd ] ] ]

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

profile settings

unicast

Unicast settings

enable-host-ecmp

Enable ECMP support for /32 (IPv4) and /128 (IPv6) routes

ipv4

(Optional) Enable ECMP support for /32 (IPv4 Only) Routes

ipv6

(Optional) Enable ECMP support for /128 (IPv6 Only) Routes

arp-nd

(Optional) Retain ARP (IPv4) and ND (IPv6) Routes in Host-Table

arp

(Optional) Retain ARP Entries in Host-Table

nd

(Optional) Retain ND Entries in Host-Table

Command Mode

  • /exec/configure

hardware profile unicast syslog-threshold

{ hardware profile unicast syslog-threshold <percentage> } | { no hardware profile unicast syslog-threshold }

Syntax Description

no

Negate the command

hardware

Change hardware usage settings

profile

profile settings

unicast

Unicast settings

syslog-threshold

Unicast Route table syslog threshold

percentage

Percentage

Command Mode

  • /exec/configure

hardware qos fc rate-shaper

[no] hardware qos fc rate-shaper [ low ]

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

qos

Configure qos related configuration

fc

Fibre Channel interface related configuration

rate-shaper

Rate Shaper for FC interface

low

(Optional) Configure FC interface low rate shaper

Command Mode

  • /exec/configure

hardware qos pfc mc-drop

[no] hardware qos pfc mc-drop

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

qos

Configure qos related configuration

pfc

Priority-flow-control specific configuration

mc-drop

Multicast packets are droped in lossless queue

Command Mode

  • /exec/configure

hardware sample-redirect module redirect-interface

hardware sample-redirect module <num> redirect-interface <interface>

Syntax Description

hardware

Change hardware usage settings

sample-redirect

Redirect netflow sampled data

module

Line card module

num

slot number

redirect-interface

Interface for redirecting the traffic

interface

Interface Name

Command Mode

  • /exec

head

| head [ -n <lines> ]

Syntax Description

|

Pipe command output to filter

head

Display first lines

-n

(Optional) modify number of lines (default 10)

lines

(Optional) number of lines to print

Command Mode

  • /output

hello-interval

{ { hello-interval <interval> } | { no hello-interval [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

hello-interval

Hello interval

interval

(seconds)

Command Mode

  • /exec/configure/router-ospf3/router-ospf3-vlink /exec/configure/router-ospf3/vrf/router-ospf3-vlink

hello-interval

{ { hello-interval <interval> } | { no hello-interval [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

hello-interval

Hello interval

interval

(seconds)

Command Mode

  • /exec/configure/router-ospf/router-ospf-vlink /exec/configure/router-ospf/vrf/router-ospf-vlink

hello-interval

{ { hello-interval <interval> } | { no hello-interval [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

hello-interval

Hello interval

interval

(seconds)

Command Mode

  • /exec/configure/router-ospf/vrf/router-ospf-slink

history

{ no | default } history { { distributions-of-statistics-kept } | { enhanced [ interval [ <interval-seconds> [ buckets [ <num-buckets> ] ] ] ] } | { hours-of-statistics-kept } | { statistics-distribution-interval } }

Syntax Description

no

interval

(Optional) buckets

distributions-of-statistics-kept

hours-of-statistics-kept

statistics-distribution-interval

default

Set a command to its defaults

history

History and Distribution Data

enhanced

Enable enhanced history collection

interval-seconds

(Optional) Interval in seconds

buckets

(Optional) Number of buckets to collect data

num-buckets

(Optional) Number of buckets

hours-of-statistics-kept

Maximum number of statistics hour groups to capture

Command Mode

  • /exec/configure/ip-sla/jitter

history

{ no | default } history { { buckets-kept } | { distributions-of-statistics-kept } | { enhanced [ interval [ <interval-seconds> [ buckets [ <num-buckets> ] ] ] ] } | { filter } | { hours-of-statistics-kept } | { lives-kept } | { statistics-distribution-interval } }

Syntax Description

no

interval

(Optional) buckets

default

Set a command to its defaults

history

History and Distribution Data

buckets-kept

Maximum number of history buckets to collect

distributions-of-statistics-kept

Maximum number of statistics distribution buckets to capture

enhanced

Enable enhanced history collection

interval-seconds

(Optional) Interval in seconds

buckets

(Optional) Number of buckets to collect data

num-buckets

(Optional) Number of buckets

filter

Add operation to History when...

hours-of-statistics-kept

Maximum number of statistics hour groups to capture

lives-kept

Maximum number of history lives to collect

statistics-distribution-interval

Statistics distribution interval size

Command Mode

  • /exec/configure/ip-sla/udp /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho

history

history { { buckets-kept <num-buckets-kept> } | { distributions-of-statistics-kept <num-dist-stats> } | { enhanced [ interval [ <interval-seconds> [ buckets [ <num-buckets> ] ] ] ] } | { filter { all | failures | none | overThreshold } } | { hours-of-statistics-kept <num-hours-of-stats> } | { lives-kept <life-size-value> } | { statistics-distribution-interval <dist-interval> } }

Syntax Description

interval

(Optional) buckets

interval-seconds

(Optional) <num-buckets>

life-size-value

<dist-interval>

history

History and Distribution Data

buckets-kept

Maximum number of history buckets to collect

num-buckets-kept

Bucket size value (default 15)

distributions-of-statistics-kept

Maximum number of statistics distribution buckets to capture

num-dist-stats

Distribution bucket size value (default 1)

enhanced

Enable enhanced history collection

buckets

(Optional) Number of buckets to collect data

num-buckets

(Optional) Number of buckets

filter

Add operation to History when...

all

Collect every operation in History

failures

Collect operations that fail in History

none

Shutoff History collection

overThreshold

Collect operations that are over threshold in History

hours-of-statistics-kept

Maximum number of statistics hour groups to capture

num-hours-of-stats

Hour groups size value (default 2)

lives-kept

Maximum number of history lives to collect

statistics-distribution-interval

Statistics distribution interval size

dist-interval

Distribution interval value in msec (default 20ms), Value in usec if precision microsecond is enabled

Command Mode

  • /exec/configure/ip-sla/udp /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho

history

{ no | default } history { { buckets-kept } | { distributions-of-statistics-kept } | { filter } | { hours-of-statistics-kept } | { lives-kept } | { statistics-distribution-interval } }

Syntax Description

no

default

Set a command to its defaults

history

History and Distribution Data

buckets-kept

Maximum number of history buckets to collect

distributions-of-statistics-kept

Maximum number of statistics distribution buckets to capture

filter

Add operation to History when...

hours-of-statistics-kept

Maximum number of statistics hour groups to capture

lives-kept

Maximum number of history lives to collect

statistics-distribution-interval

Statistics distribution interval size

Command Mode

  • /exec/configure/ip-sla/dns /exec/configure/ip-sla/fabricPathEcho /exec/configure/ip-sla/http

history

history { { buckets-kept <num-buckets-kept> } | { distributions-of-statistics-kept <num-dist-stats> } | { filter { all | failures | none | overThreshold } } | { hours-of-statistics-kept <num-hours-of-stats> } | { lives-kept <life-size-value> } | { statistics-distribution-interval <dist-interval> } }

Syntax Description

dist-interval

<num-buckets-kept>

num-hours-of-stats

<life-size-value>

distributions-of-statistics-kept

hours-of-statistics-kept

statistics-distribution-interval

history

History and Distribution Data

buckets-kept

Maximum number of history buckets to collect

num-buckets-kept

Bucket size value (default 15)

num-dist-stats

Distribution bucket size value (default 1)

filter

Add operation to History when...

all

Collect every operation in History

failures

Collect operations that fail in History

none

Shutoff History collection

overThreshold

Collect operations that are over threshold in History

hours-of-statistics-kept

Maximum number of statistics hour groups to capture

lives-kept

Maximum number of history lives to collect

life-size-value

Life size value (default 0)

Command Mode

  • /exec/configure/ip-sla/dns /exec/configure/ip-sla/fabricPathEcho /exec/configure/ip-sla/http

history

history { { distributions-of-statistics-kept <num-dist-stats> } | { enhanced [ interval [ <interval-seconds> [ buckets [ <num-buckets> ] ] ] ] } | { hours-of-statistics-kept <num-hours-of-stats> } | { statistics-distribution-interval <dist-interval> } }

Syntax Description

interval

(Optional) buckets

num-buckets

(Optional) <num-hours-of-stats>

enhanced

hours-of-statistics-kept

history

History and Distribution Data

distributions-of-statistics-kept

Maximum number of statistics distribution buckets to capture

num-dist-stats

Distribution bucket size value (default 1)

interval-seconds

(Optional) Interval in seconds

buckets

(Optional) Number of buckets to collect data

hours-of-statistics-kept

Maximum number of statistics hour groups to capture

num-hours-of-stats

Hour groups size value (default 2)

statistics-distribution-interval

Statistics distribution interval size

dist-interval

Distribution interval value in msec (default 20ms), Value in usec if precision microsecond is enabled

Command Mode

  • /exec/configure/ip-sla/jitter

holdtime

holdtime { infinite | <secs> } | no holdtime

Syntax Description

no

Negate a command or set its defaults

holdtime

LDP session holdtime

infinite

Ignore LDP session holdtime

secs

Holdtime in seconds

Command Mode

  • /exec/configure/ldp

hop-limit maximum

[no] hop-limit maximum <limit>

Syntax Description

no

(Optional) Negate a command or set its defaults

limit

Maximum hop count value allowed

Command Mode

  • /exec/configure/config-ra-guard

hop-limit minimum

[no] hop-limit minimum <limit>

Syntax Description

no

(Optional) Negate a command or set its defaults

limit

Minimum hop count value allowed

Command Mode

  • /exec/configure/config-ra-guard

hop

{ hop <val> } | { no hop }

Syntax Description

no

Negate a command or set its defaults

hop

Configure ngoam hop count

val

Configure ngoam service hop count value

Command Mode

  • /exec/configure/configngoamprofile

host-reachability protocol

[no] host-reachability protocol { bgp | openflow | openflow-ir }

Syntax Description

no

(Optional) Negate a command or set its defaults

host-reachability

Configure host reachability advertisement

protocol

Control protocol to use

bgp

Border Gateway Protocol

openflow

OpenFlow

openflow-ir

OpenFlow-IR

Command Mode

  • /exec/configure/if-nve

host

[no] { host <hostaddr> | <prefix> | <addr> <mask> }

Syntax Description

no

(Optional) Negate a command or set its defaults

host

Host address of the object-group member

hostaddr

A.B.C.D Host address

addr

A.B.C.D Network address of object-group member

mask

A.B.C.D wildcard

prefix

A.B.C.D/nn Network prefix of the object-group member

Command Mode

  • /exec/configure/objgroup

host group permit

{ <seq> host <hostip> group <range> { permit | deny } } | { no <seq> [ host <hostip> group <range> { permit | deny } ] }

Syntax Description

no

Negate a command or set its defaults

seq

Sequence Number

host

Host IP Address

hostip

Host IP Address

group

Configure explicit group ranges

range

Group Prefix

permit

Admission Permitted

deny

Admission Denied

Command Mode

  • /exec/configure/nbm-vrf/nbm-host-policy/sender

host group permit

{ <seq> host <hostip> group <range> { permit | deny } } | { no <seq> [ host <hostip> group <range> { permit | deny } ] }

Syntax Description

no

Negate a command or set its defaults

seq

Sequence Number

host

Host IP Address

hostip

Host IP Address

group

Configure explicit group ranges

range

Group Prefix

permit

Admission Permitted

deny

Admission Denied

Command Mode

  • /exec/configure/nbm-host-policy/sender

host source group permit

{ <seq> host <hostip> source <sourceip> group <range> { permit | deny } } | { no <seq> [ host <hostip> source <sourceip> group <range> { permit | deny } ] }

Syntax Description

no

Negate a command or set its defaults

seq

Sequence Number

host

Host IP Address

hostip

Host IP Address value

source

Source IP Address

sourceip

Source IP Address value

group

Configure explicit group ranges

range

Group Prefix

permit

Admission Permitted

deny

Admission Denied

Command Mode

  • /exec/configure/nbm-vrf/nbm-host-policy/receiver

host source group permit

{ <seq> host <hostip> source <sourceip> group <range> { permit | deny } } | { no <seq> [ host <hostip> source <sourceip> group <range> { permit | deny } ] }

Syntax Description

no

Negate a command or set its defaults

seq

Sequence Number

host

Host IP Address

hostip

Host IP Address value

source

Source IP Address

sourceip

Source IP Address value

group

Configure explicit group ranges

range

Group Prefix

permit

Admission Permitted

deny

Admission Denied

Command Mode

  • /exec/configure/nbm-host-policy/receiver

hostname

{ hostname | switchname } <name> | no { hostname | switchname }

Syntax Description

no

Negate a command or set its defaults

hostname

Configure system's host name

switchname

Configure system's host name

name

Enter switchname

Command Mode

  • /exec/configure

hostname dynamic

[no] hostname dynamic

Syntax Description

no

(Optional) Negate a command or set its defaults

hostname

Set dynamic hostname for IS-IS

dynamic

Dynamic hostname

Command Mode

  • /exec/configure/otv-isis/otv-isis-vrf-common

hostname dynamic

[no] hostname dynamic

Syntax Description

no

(Optional) Negate a command or set its defaults

hostname

Set dynamic hostname for IS-IS

dynamic

Dynamic hostname

Command Mode

  • /exec/configure/router-isis/router-isis-vrf-common

hostname dynamic

[no] hostname dynamic

Syntax Description

no

(Optional) Negate a command or set its defaults

hostname

Set dynamic hostname for IS-IS

dynamic

Dynamic hostname

Command Mode

  • /exec/configure/l2mp-isis/l2mp-isis-vrf-common

hsrp

[no] hsrp <group-id> [ ipv4 ]

Syntax Description

no

(Optional) Negate a command or set its defaults

hsrp

HSRP interface configuration commands

group-id

Group number (0-255 for HSRPv1)

ipv4

(Optional) Configure IP Version 4 group

Command Mode

  • /exec/configure/if-eth-any /exec/configure/if-vlan-common /exec/configure/if-port-channel /exec/configure/if-sub /exec/configure/if-ethernet-all

hsrp anycast

[no] hsrp anycast <id> { ipv4 | ipv6 | both }

Syntax Description

no

(Optional) Negate a command or set its defaults

hsrp

HSRP configuration commands

anycast

Anycast related commands

id

Bundle number

ipv4

Associate IP Version 4 for the bundle

ipv6

Associate IP Version 6 for the bundle

both

Associate IP Version 4 and 6 for the bundle

Command Mode

  • /exec/configure

hsrp bfd

[no] hsrp bfd

Syntax Description

no

(Optional) Negate a command or set its defaults

hsrp

HSRP interface configuration commands

bfd

BFD protocol

Command Mode

  • /exec/configure/if-eth-any /exec/configure/if-vlan-common /exec/configure/if-port-channel /exec/configure/if-sub /exec/configure/if-ethernet-all

hsrp delay minimum

hsrp delay { minimum <min-delay> | reload <reload-delay> } + | no hsrp delay [ minimum | reload ]

Syntax Description

no

Negate a command or set its defaults

hsrp

HSRP interface configuration commands

delay

HSRP initialisation delay

minimum

Minimum delay

reload

Delay after reload

min-delay

<0-10000> Delay in seconds

reload-delay

<0-10000> Delay in seconds

Command Mode

  • /exec/configure/if-eth-any /exec/configure/if-vlan-common /exec/configure/if-port-channel /exec/configure/if-sub /exec/configure/if-ethernet-all

hsrp force state vlan

hsrp force state vlan { <vlans> | all }

Syntax Description

hsrp

Hot Standby Router Protocol (HSRP) information

force

Move the HSRP state

state

HSRP state

vlan

HSRP state changes for these vlans

all

Include all HSRP configured VLANs

vlans

VLAN IDs of the VLAN for which state change will affect

Command Mode

  • /exec

hsrp ipv6

[no] hsrp <group-id> ipv6

Syntax Description

no

(Optional) Negate a command or set its defaults

hsrp

HSRP interface configuration commands

group-id

Group number

ipv6

Configure IP Version 6 group

Command Mode

  • /exec/configure/if-eth-any /exec/configure/if-vlan-common /exec/configure/if-port-channel /exec/configure/if-sub /exec/configure/if-ethernet-all

hsrp mac-refresh

hsrp mac-refresh [ <time> ] | no hsrp mac-refresh

Syntax Description

no

Negate a command or set its defaults

hsrp

HSRP interface configuration commands

mac-refresh

Interface mac-refresh time

time

(Optional) Timeout value (0-10000) in sec

Command Mode

  • /exec/configure/if-eth-any /exec/configure/if-vlan-common /exec/configure/if-port-channel /exec/configure/if-sub /exec/configure/if-ethernet-all

hsrp timers extended-hold

[no] hsrp timers extended-hold [ <extended-hold> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

hsrp

HSRP interface configuration commands

timers

Global Timers

extended-hold

Extended Hold

extended-hold

(Optional) Time in seconds

Command Mode

  • /exec/configure

hsrp use-bia

[no] hsrp use-bia [ scope interface ]

Syntax Description

no

(Optional) Negate a command or set its defaults

hsrp

HSRP interface configuration commands

use-bia

HSRP uses interface's burned in address

scope

(Optional) Specify the scope of use-bia

interface

(Optional) Use-bia applies to all groups on this interface or sub-interface

Command Mode

  • /exec/configure/if-eth-any /exec/configure/if-vlan-common /exec/configure/if-port-channel /exec/configure/if-sub /exec/configure/if-ethernet-all

hsrp version 1

hsrp version { 1 | 2 } | no hsrp version

Syntax Description

no

Negate a command or set its defaults

hsrp

HSRP interface configuration commands

version

HSRP version

1

Version 1

2

Version 2

Command Mode

  • /exec/configure/if-eth-any /exec/configure/if-vlan-common /exec/configure/if-port-channel /exec/configure/if-sub /exec/configure/if-ethernet-all

http get

[no] http { get } <WORD> { [ cache { disable | enable } ] [ proxy <proxy-info> ] [ source-ip { <source-ip-hostname> | <source-ip-address> } ] [ source-port <src-port> ] [ version <http-version> ] } +

Syntax Description

no

(Optional)

cache

(Optional) enable

proxy

(Optional) <proxy-info>

source-ip

(Optional) <source-ip-hostname>

source-port

(Optional) <src-port>

version

(Optional) <http-version>

http

HTTP Operation

get

HTTP get operation

WORD

URL

enable

(Optional) enable download of cached entries (default)

disable

(Optional) disable download of cached entries (default)

proxy-info

(Optional) proxy information string

source-ip-hostname

(Optional) source IP hostname, broadcast disallowed

source-ip-address

(Optional) source IP address, broadcast disallowed

src-port

(Optional) Port Number (Recommended port range between 1025-65534)

http-version

(Optional) Supported HTTP versions are '1.0' and '1.1'.

Command Mode

  • /exec/configure/ip-sla

http proxy server

[no] http proxy server <hostipname> [ port <port-num> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

http

Configure http related parameters

proxy

Http Proxy related parameters

server

Server address

hostipname

IPV4/IPV6 address or DNS name of proxy server

port

(Optional) Http proxy server port

port-num

(Optional) port number

Command Mode

  • /exec/configure/trustpool

human

| human

Syntax Description

|

Pipe command output to filter

human

output in human format

Command Mode

  • /output

human

| human

Syntax Description

|

Pipe command output to filter

human

output in human format

Command Mode

  • /output

hw-module logging onboard

[no] hw-module logging onboard [ { environmental-history | error-stats | interrupt-stats | module <module> [ { environmental-history | error-stats | interrupt-stats | obfl-logs | cpuhog } ] | obfl-logs | cpuhog } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

hw-module

Enable/Disable OBFL information

logging

Enable/Disable OBFL information

onboard

Enable/Disable OBFL information

environmental-history

(Optional) Enable/Disable OBFL environmental history

error-stats

(Optional) Enable/Disable OBFL error statistics

interrupt-stats

(Optional) Enable/Disable OBFL interrupt statistics

cpuhog

(Optional) Enable/Disable OBFL cpu hog events

module

(Optional) Enable/Disable OBFL information for Module

module

(Optional) Enter module number

obfl-logs

(Optional) Enable/Disable OBFL (boot-uptime/device-version/obfl-history)

Command Mode

  • /exec/configure

hw-module logging onboard

[no] hw-module logging onboard [ { counter-stats | module <module> [ { counter-stats } ] } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

hw-module

Enable/Disable OBFL information

logging

Enable/Disable OBFL information

onboard

Enable/Disable OBFL information

counter-stats

(Optional) Enable/Disable OBFL counter statistics

module

(Optional) Enable/Disable OBFL information for Module

module

(Optional) Enter module number

Command Mode

  • /exec/configure