Cisco Nexus 2000 Series NX-OS Fabric Extender Software Configuration Guide for Cisco Nexus 5000 Series Switches, Release 4.1

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: May 23, 2014

Chapter: New and Changed Information for the Cisco Nexus 2000 Series

New and Changed Features for Release 4.1(3)N1(1)

New and Changed Information for the Cisco Nexus 2000 Series

This chapter provides release specific information for each new and changed feature in the Cisco Nexus 2000 Series Fabric Extender Software Configuration Guide.

To check for additional information about Cisco NX-OS Release 4.1(3)N1(1), see the Cisco Nexus 5000 Series and Cisco Nexus 2000 Series Release Notes, 31/July/2009 available at the following Cisco website: http://www.cisco.com/c/en/us/support/switches/nexus-2000-series-fabric-extenders/products-release-notes-list.html.

New and Changed Features for Release 4.1(3)N1(1)

New and Changed Features for Release 4.1(3)N1(1)

This table summarizes the new and changed features for the Cisco Nexus 2000 Series Fabric Extender Software Configuration Guide for Cisco NX-OS Release 4.1(3)N1(1), and tells you where they are documented.

Feature	Description	Changed in Release	Where Documented
vPC	Added a description of virtual Port Channels (vPC).	4.1(3)N1(1)	Virtual Port Channels
vPC	Added configuration steps to upgrade the Fabric Extender when configured in a vPC.	4.1(3)N1(1)	Upgrading the Fabric Extender in a vPC Topology
Locator beacon LED	The locator beacon LED is enabled or disabled with a new command.	4.1(3)N1(1)	Enabling the Fabric Extender Locator LED

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)