Cisco Nexus 1000V Command Reference, Release 4.2(1)SV1(5.1)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: June 26, 2014

X Commands

This chapter describes the Cisco Nexus 1000V commands that begin with the letter X.

xml server max-session

To set the number of allowed XML server sessions, use the xml server max-session command.

xml server max-session sessions

Syntax Description

sessions

Maximum number of XML sessions permitted at one time. The range is 1–8.

Defaults

The default maximum number of sessions is eight.

Command Modes

Global configuration (config)

Supported User Roles

network-admin

Command History

Release	Modification
4.0(4)SV1(1)	This command was introduced.

Examples

This example shows how to set the number of allowed XML server sessions to 6:

n1000v# config t

n1000v# xml server max-session 6

n1000v#

Related Commands

Command	Description
show xml server status	Displays information about XML server settings and any active XML server sessions.
xml server terminate session	Displays information about XML server settings and any active XML server sessions.
xml server timeout	Sets the number of seconds after which an inactive XML server session is terminated.

xml server terminate session

To terminate the specified XML server session, use the xml server terminate session command.

xml server terminate session session-number

Syntax Description

session-number

Identifier for an existing XML server session. The range is 0–214748364.

Defaults

None

Command Modes

Any

Supported User Roles

network-admin

Command History

Release	Modification
4.0(4)SV1(1)	This command was introduced.

Examples

This example shows how to terminate the XML server session 8665:

n1000v# xml server terminate 8665

n1000v#

Related Commands

Command	Description
show xml server status	Displays information about XML server settings and any active XML server sessions.
xml server max-session	Sets the number of allowed XML server sessions.
xml server timeout	Sets the number of seconds after which an inactive XML server session is terminated.

xml server timeout

To set the number of seconds after which an inactive XML server session is terminated, use the xml server timeout command.

xml server timeout seconds

Syntax Description

seconds

Maximum time that the XML server can remain inactive before session termination. The range is 0–1200 seconds.

Defaults

None

Command Modes

Global configuration (config)

Supported User Roles

network-admin

Command History

Release	Modification
4.0(4)SV1(1)	This command was introduced.

Examples

This example shows how to set the XML server timeout to 600 seconds:

n1000v# config t

n1000v# xml server timeout 600

n1000v#

Related Commands

Command	Description
show xml server status	Displays information about XML server settings and any active XML server sessions.
xml server max-session	Sets the number of allowed XML server sessions.
xml server terminate session	Displays information about XML server settings and any active XML server sessions.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)