Skip to content
Skip to search
Skip to footer

Cisco Tetration (Secure Workload) M5 Cluster Hardware Deployment Guide

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: May 10, 2021

Chapter: System Specifications

System Specifications
Environmental Specifications
Power Cables

System Specifications

Environmental Specifications

The following table lists the environmental specifications required for installing the Tetration (Secure Workload) cluster.

Table 1. Environmental Specifications
Environment		Specification
Temperature	Operating	41 to 95°F (5 to 35°C) with derating the maximum temperature by 1°C for every 1000 ft (305 m) above sea level
Temperature	Storage	-40 to 149°F (-40 to 65°C)
Humidity	Operating	10 to 80% relative humidity with a humidity gradation of 10% per hour
Humidity	Storage	5 to 93% relative humidity
Altitude	Operating	0 to 10,000 ft (0 to 3050 m)
Altitude	Storage	0 to 40,000 ft (0 to 12,200 m)

Power Cables

The following tables list the power cables that are included with the Tetration (Secure Workload) M5 cluster.

Table 2. 39-RU Cluster, Single-Rack Configuration
Part Number	Description	Quantity
TA-RACK-UCS2-INT	Cisco R42612 dynamic rack with side panels	1
TA-ETH-RJ45-SINGLE	RJ-45 cable kit for a 39-RU single-rack configuration	1
TA-SFP-H10GB-CU2M	10GBASE-CU SFP+ 2-m cable	16
TA-SFP-H10GB-CU1-5	10GBASE-CU SFP+ 1.5-m cable	32
TA-QSFP-H40G-CU1M	40GBASE-CR4 passive copper 1-m cable	4
TA-SFP-H10GB-CU1M	10GBASE-CU SFP+ 1-m cable	25
TA-SFP-H10GB-CU2-5	10GBASE-CU SFP+ 2.5-m cable	20

Table 3. 39-RU Cluster, Dual-Rack Configuration
Part Number	Description	Quantity
TA-RACK-UCS2-INT	Cisco R42612 dynamic rack, with side panels	2
TA-ETH-RJ45-DUAL	RJ-45 cable kit for a 39-RU single-rack configuration	1
TA-SFP-H10GB-CU2M	10GBASE-CU SFP+ 2-m cable	15
TA-SFP-H10GB-CU1-5	10GBASE-CU SFP+ 1.5-m cable	19
TA-QSFP-H40G-CU1M	40GBASE-CR4 passive copper 1-m cable	1
TA-QSFP-H40G-CU5M	40GBASE-CR4 passive copper 5-m cable	3
TA-SFP-H10GB-CU2-5	10GBASE-CU SFP+ 2.5-m cable	12
TA-SFP-H10GB-CU5M	10GBASE-CU SFP+ 5-m cable	47

Table 4. 8-RU Cluster
Part Number	Description	Quantity
TA-RACK-UCS2-INT	Cisco R42612 dynamic rack, with side panels	1
CAB-ETH-S-RJ45	RJ-45 straight-through yellow 6-ft cable for Ethernet	6
TA-SFP-H10GB-CU1M	10GBASE-CU SFP+ 1-m cable	13
TA-SFP-H10GB-CU1-5	10GBASE-CU SFP+ 1.5-m cable	12
TA-QSFP-H40G-CU1M	40GBASE-CR4 passive copper 1-m cable	2
GLC-TE	1000BASE-T SFP transceiver module for Category 5 copper wire	6

Was this Document Helpful?

Feedback

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)