Cisco Firepower Release Notes, Version 6.2.3 Patches

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Cisco Firepower Release Notes, Version 6.2.3 Patches

Chapter Title

Compatibility

Results

Updated:
May 2, 2018

Chapter: Compatibility

Compatibility

For general compatibility information see:

For compatibility information for this version, see:

Firepower Management Center

The Firepower Management Center is a fault-tolerant, purpose-built network appliance that provides a centralized firewall management console. Firepower Management Center Virtual brings full firewall management functionality to virtualized environments.

Firepower Management Center

This release supports the following hardware FMC platforms:

  • FMC 1000, 2500, 4500

  • FMC 2000, 4000

  • FMC 750, 1500, 3500

We recommend you keep the BIOS and RAID controller firmware up to date. For more information, see the Cisco Firepower Compatibility Guide.

Firepower Management Center Virtual

This release supports the following FMCv public cloud implementations:

  • Firepower Management Center Virtual for Amazon Web Services (AWS)

This release supports the following FMCv on-prem/private cloud implementations:

  • Firepower Management Center Virtual for Kernel-based virtual machine (KVM)

  • Firepower Management Center Virtual for VMware vSphere/VMware ESXi 5.5, 6.0, or 6.5

For supported instances, see the Cisco Firepower Management Center Virtual Getting Started Guide.

Firepower Devices

Cisco Firepower devices monitor network traffic and decide whether to allow or block specific traffic based on a defined set of security rules. Some Firepower devices run Firepower Threat Defense (FTD) software; some run NGIPS/ASA FirePOWER software. Some can run either—but not both at the same time.


Note

These release notes list the supported devices for this release. Even if an older device has reached EOL and you can no longer upgrade, you can still manage that device with a newer FMC, up to a few versions ahead. Similarly, newer versions of ASDM can manage older ASA FirePOWER modules. For supported management methods, including backwards compatibility, see Manager-Device Compatibility.

Table 1. Firepower Threat Defense in Version 6.2.3

FTD Platform

OS/Hypervisor

Additional Details

Firepower 2110, 2120, 2130, 2140

—

—

Firepower 4110, 4120, 4140, 4150

Firepower 9300: SM-24, SM-36, SM-44 modules

FXOS 2.3.1.73 or later build.

Note 

Firepower 6.2.3.16+ requires FXOS 2.3.1.157+.

Upgrade FXOS first.

To resolve issues, you may need to upgrade FXOS to the latest build. To help you decide, see the Cisco Firepower 4100/9300 FXOS Release Notes, 2.3(1).

ASA 5506-X, 5506H-X, 5506W-X

ASA 5508-X, 5516-X

ASA 5512-X

ASA 5515-X

ASA 5525-X, 5545-X, 5555-X

ISA 3000

—

Although you do not separately upgrade the operating system on these devices in FTD deployments, you should make sure you have the latest ROMMON image on the ISA 3000, ASA 5506-X, 5508-X, and 5516-X. See the instructions in the Cisco ASA and Firepower Threat Defense Reimage Guide.

Firepower Threat Defense Virtual (FTDv)

Any of:

  • AWS: Amazon Web Services

  • Azure: Microsoft Azure

  • KVM: Kernel-based Virtual Machine

  • VMware vSphere/VMware ESXi 5.5, 6.0, or 6.5

For supported instances, see the appropriate FTDv Getting Started guide.

Table 2. NGIPS/ASA FirePOWER in Version 6.2.3

NGIPS/ASA FirePOWER Platform

OS/Hypervisor

Additional Details

ASA 5506-X, 5506H-X, 5506W-X

ASA 9.6(x) to 9.9(x)

There is wide compatibility between ASA and ASA FirePOWER versions. However, upgrading allows you to take advantage of new features and resolved issues. See the Cisco ASA Upgrade Guide for order of operations.

You should also make sure you have the latest ROMMON image on the ISA 3000, ASA 5506-X, 5508-X, and 5516-X. See the instructions in the Cisco ASA and Firepower Threat Defense Reimage Guide.

ASA 5508-X, 5516-X

ASA 9.5(2) to 9.16(x)

ASA 5512-X

ASA 9.5(2) to 9.9(x)

ASA 5515-X

ASA 9.5(2) to 9.12(x)

ASA 5525-X, 5545-X, 5555-X

ASA 9.5(2) to 9.14(x)

ASA 5585-X-SSP-10, -20, -40, -60

ASA 9.5(2) to 9.12(x)

NGIPSv

VMware vSphere/VMware ESXi 5.5, 6.0, or 6.5

For supported instances, see the Cisco Firepower NGIPSv Quick Start Guide for VMware.

Firepower 7010, 7020, 7030, 7050

Firepower 7110, 7115, 7120, 7125

Firepower 8120, 8130, 8140

Firepower 8250, 8260, 8270, 8290

Firepower 8350, 8360, 8370, 8390

AMP 7150, 8050, 8150

AMP 8350, 8360, 8370, 8390

—

—

Manager-Device Compatibility

Firepower Management Center

All devices support remote management with the Firepower Management Center, which can manage multiple devices. The FMC must run the same or newer version as its managed devices. You cannot upgrade a device past the FMC. Even for maintenance (third-digit) releases, you must upgrade the FMC first.

A newer FMC can manage older devices up to a few major versions back, as listed in the following table. However, we recommend you always update your entire deployment. New features and resolved issues often require the latest release on both the FMC and its managed devices.

Table 3. FMC-Device Compatibility

FMC Version

Oldest Device Version You Can Manage

6.7.0/6.7.x

6.3.0

6.6.0/6.6.x

6.2.3

6.5.0

6.2.3

6.4.0

6.1.0

6.3.0

6.1.0

6.2.3

6.1.0

Firepower Device Manager

Firepower Device Manager (FDM) is built into FTD and can manage a single device. FDM lets you configure the basic features of the software that are most commonly used for small or mid-size networks.

Table 4. FDM-FTD Compatibility

FTD Platform

FDM Compatibility

Firepower 2100 series

6.2.1+

Firepower 4100/9300

6.5.0+

ASA 5500-X series

6.1.0+

ISA 3000

6.2.3+

FTDv for AWS

6.6.0+

FTDv for Azure

6.5.0+

FTDv for KVM

6.2.3+

FTDv for VMware

6.2.2+

Adaptive Security Device Manager

ASA with FirePOWER Services is an ASA firewall that runs Firepower NGIPS software as a separate application, also called the ASA FirePOWER module. You can use Cisco Adaptive Security Device Manager (ASDM) to manage both applications.

In most cases, newer ASDM versions are backwards compatible with all previous ASA versions. However, there are some exceptions. For example, ASDM 7.13(1) can manage an ASA 5516-X on ASA 9.10(1). ASDM 7.13(1) and ASDM 7.14(1) did not support ASA 5512-X, 5515-X, 5585-X, and ASASM; you must upgrade to ASDM 7.13(1.101) or 7.14(1.48) to restore ASDM support. For details, see Cisco ASA Compatibility.

A newer ASA FirePOWER module requires a newer version of ASDM, as listed in the following table.

Table 5. ASDM-ASA FirePOWER Compatibility

ASA FirePOWER Version

Minimum ASDM Version

6.7.0/6.7.x

7.15.1

6.6.0/6.6.x

7.14.1

6.5.0

7.13.1

6.4.0

7.12.1

6.3.0

7.10.1

6.2.3

7.9.2

Web Browser Compatibility

Browsers

We test with the latest versions of the following popular browsers, running on currently supported versions of macOS and Microsoft Windows:

  • Google Chrome

  • Mozilla Firefox

  • Microsoft Internet Explorer 10 and 11 (Windows only)

If you encounter issues with any other browser, or are running an operating system that has reached end of life, we ask that you switch or upgrade. If you continue to encounter issues, contact Cisco TAC.


Note

We do not perform extensive testing with Apple Safari or Microsoft Edge. However, Cisco TAC welcomes feedback on issues you encounter.

Browser Settings and Extensions

Regardless of browser, you must make sure JavaScript, cookies, and TLS v1.2 remain enabled.

If you are using Microsoft Internet Explorer 10 or 11:

  • For the Check for newer versions of stored pages browsing history option, choose Automatically.

  • Disable the Include local directory path when uploading files to server custom security setting (Internet Explorer 11 only).

  • Enable Compatibility View for the appliance IP address/URL.

Note that some browser extensions can prevent you from saving values in fields like the certificate and key in PKI objects. These extensions include, but are not limited to, Grammarly and Whatfix Editor. This happens because these extensions insert characters (such as HTML) in the fields, which causes the system to see them invalid. We recommend you disable these extensions while you’re logged into our products.

Securing Communications

When you first log in, the system uses a self-signed digital certificate to secure web communications. Your browser should display an untrusted authority warning, but also should allow you to add the certificate to the trust store. Although this will allow you to continue, we do recommend that you replace the self-signed certificate with a certificate signed by a globally known or internally trusted certificate authority (CA).

To begin replacing the self-signed certificate:

  • Firepower Management Center or 7000/8000 series: Select System > Configuration, then click HTTPS Certificates.

  • Firepower Device Manager: Click Device, then the System Settings > Management Access link, then the Management Web Server tab.

For detailed procedures, see the online help or the configuration guide for your product.


Note

If you do not replace the self-signed certificate:

  • Google Chrome does not cache static content, such as images, CSS, or JavaScript. Especially in low bandwidth environments, this can extend page load times.

  • Mozilla Firefox can stop trusting the self-signed certificate when the browser updates. If this happens, you can refresh Firefox, keeping in mind that you will lose some settings; see Mozilla's Refresh Firefox support page.

Browsing from a Monitored Network

Many browsers use Transport Layer Security (TLS) v1.3 by default. If you are using an SSL policy to handle encrypted traffic, and people in your monitored network use browsers with TLS v1.3 enabled, websites that support TLS v1.3 fail to load. As a workaround, configure your managed device to remove extension 43 (TLS 1.3) from ClientHello negotiation. In Version 6.2.3.7+, a new CLI command allows you to specify when to downgrade; see Features and Functionality.

For more information, see the software advisory titled: Failures loading websites using TLS 1.3 with SSL inspection enabled.

Screen Resolution Requirements

Table 6. Screen Resolution Requirements

Interface

Resolution

Firepower Management Center

1280 x 720

7000/8000 series device (limited local interface)

1280 x 720

Firepower Device Manager

1024 x 768

ASDM managing an ASA FirePOWER module

1024 x 768

Firepower Chassis Manager for the Firepower 4100/9300

1024 x 768

Was this Document Helpful?

FeedbackFeedback

Contact Cisco