Release Notes for Cisco Catalyst Cellular Gateways, Release IOS CG 17.18.x
Available Languages
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- US/Canada 800-553-2447
- Worldwide Support Phone Numbers
- All Tools
Feedback
Feedback
Cisco Catalyst Cellular Gateways, Release 17.18.1a
Cisco Catalyst Cellular Gateways, Release 17.18.1a
Cisco IOS CG 17.18.1a is the first release for the Cisco Catalyst Cellular Gateways in the Cisco IOS CG 17.18.x series.
The key highlights of this release include these features and enhancements:
● Monitoring and Observability
● Cellular, IPv6, Voice, Virtualization
● SRv6 Enhancements
● Security and SASE enhancements
New software features
This section provides a brief description of the new software features introduced in this release.
Table 1. New software features for Cisco Catalyst Cellular Gateways, Release 17.18.1a
| Product impact |
Feature |
Description |
| Ease of Use
|
From Cisco IOS XE 17.18.1a release, you can now upgrade the firmware image for cellular module, LTE module, or Wi-Fi module of supported devices using Cisco Catalyst SD-WAN Manager, without configuring and managing multiple commands for each device and its associated modules. |
|
| Ease of use
|
You can select specific frequency bands to which the device can connect to, allowing optimized connection depending on location and network availability. This configuration can be done using Feature Parcels in Catalyst Cisco SD-WAN Manager. |
|
| Ease of use
|
Configure logging of crash dump events for cellular interfaces |
You can configure the device to collect the crash dump logs by enabling the boot-and-hold mode on the device using the lte modem crash-action boot-and-hold command. |
| Ease of use
|
You can reset the cellular network profile settings on a specific interface to a factory default state using the cellular<slot> lte profile reset command. |
|
| Ease of use
|
You can enable diagnostic monitoring log capture for devices with cellular interfaces using Catalyst Cisco SD-WAN Manager. |
This section lists the resolved issues in this specific software release.
Note: This software release may contain bug fixes first introduced in other releases. To see additional information, click the bug ID to access the Cisco Bug Search Tool. To search for a documented Cisco product issue, type in the browser: <bug_number> site:cisco.com.
Resolved issues in Cisco IOS XE 17.18.1a
There are no customer impacting bugs that were fixed in this release.
This section lists the open issues in this specific software release.
Note: This software release may contain open bugs first identified in other releases. To see additional information, click the bug ID to access the Cisco Bug Search Tool. To search for a documented Cisco product issue, type in the browser: <bug_number> site:cisco.com.
Open issues in Cisco IOS XE 17.18.1a
There are no customer impacting bugs that were identified in this release.
● Software Configuration Guide
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2025 Cisco Systems, Inc. All rights reserved.