Read Me First
 Note |
To achieve simplification and consistency, the Cisco SD-WAN solution has been rebranded as Cisco Catalyst SD-WAN. In addition, from Cisco IOS XE SD-WAN Release 17.12.1a and Cisco Catalyst SD-WAN Release 20.12.1, the following component changes are applicable: Cisco vManage to Cisco Catalyst SD-WAN Manager, Cisco vAnalytics to Cisco Catalyst SD-WAN Analytics, Cisco vBond to Cisco Catalyst SD-WAN Validator, Cisco vSmart to Cisco Catalyst SD-WAN Controller, and Cisco Controllers to Cisco Catalyst SD-WAN Control Components. See the latest Release Notes for a comprehensive list of all the component brand name changes. While we transition to the new names, some inconsistencies might be present in the documentation set because of a phased approach to the user interface updates of the software product. |
Related References
User Documentation
Communications, Services, and Additional Information
-
Sign up for Cisco email newsletters and other communications at: Cisco Profile Manager.
-
For information on the latest technical, advanced, and remote services to increase the operational reliability of your network visit Cisco Services.
-
To browse and discover secure, validated enterprise-class apps, products, solutions, and services, visit Cisco Devnet.
-
To obtain general networking, training, and certification titles from Cisco Press Publishers, visit Cisco Press.
-
To find warranty information for a specific product or product family, visit Cisco Warranty Finder.
-
To view open and resolved bugs for a release, access the Cisco Bug Search Tool.
-
To submit a service request, visit Cisco Support.
Documentation Feedback
To provide feedback about Cisco technical documentation use the feedback form available in the right pane of every online document.
Release Notes for Cisco IOS XE Catalyst SD-WAN Devices, Cisco IOS XE Catalyst SD-WAN Release 17.12.1a
Note |
To achieve simplification and consistency, the Cisco SD-WAN solution has been rebranded as Cisco Catalyst SD-WAN. In addition, from Cisco IOS XE SD-WAN Release 17.12.1a and Cisco Catalyst SD-WAN Release 20.12.1, the following component changes are applicable: Cisco vManage to Cisco Catalyst SD-WAN Manager, Cisco vAnalytics to Cisco Catalyst SD-WAN Analytics, Cisco vBond to Cisco Catalyst SD-WAN Validator, Cisco vSmart to Cisco Catalyst SD-WAN Controller, and Cisco Controllers to Cisco Catalyst SD-WAN Control Components. See the latest Release Notes for a comprehensive list of all the component brand name changes. While we transition to the new names, some inconsistencies might be present in the documentation set because of a phased approach to the user interface updates of the software product. |
These release notes accompany the Cisco IOS XE Catalyst SD-WAN Release 17.12.1a, which provides Cisco Catalyst SD-WAN capabilities. They include release-specific information for Cisco Catalyst SD-WAN Controllers, Cisco Catalyst SD-WAN Validators, Cisco SD-WAN Manager, as applicable to Cisco IOS XE Catalyst SD-WAN devices.
Related Releases
For release information about Cisco Catalyst SD-WAN Control Components, refer to Release Notes for Cisco SD-WAN Control Components, Cisco Catalyst SD-WAN Control Components Release 20.12.x
What's New for Cisco IOS XE Catalyst SD-WAN Release 17.12.1a
This section applies to Cisco IOS XE Catalyst SD-WAN devices.
Cisco is constantly enhancing the Cisco Catalyst SD-WAN solution with every release and we try and keep the content in line with the latest enhancements. The following table lists new and modified features we documented in the Configuration, Command Reference, and Hardware Installation guides. For information on additional features and fixes that were committed to the Cisco Catalyst SD-WAN solution, see the Resolved and Open Bugs section in the Release Notes.
| Feature | Description |
|---|---|
|
Cisco Catalyst SD-WAN Getting Started Guide |
|
|
Support for Certificates Without the Organizational Unit Field |
Enterprise certificates that you install on devices do not require the Organizational Unit (OU) field to be defined. Earlier, this field was used as part of the authentication of a device. However, if a signed certificate includes the OU field, the field must match the organization name configured on the device. |
|
Cisco Catalyst SD-WAN Systems and Interfaces |
|
|
Cisco Catalyst SD-WAN Remote Access Configuration in SSL-VPN Mode |
This feature enables you to configure the following Cisco Catalyst SD-WAN Remote Access features for a device in SSL-VPN mode, using Cisco SD-WAN Manager: — Private IP Pool — Authentication — AAA Policy |
|
The following new features are introduced to the feature profiles: — In the System Profile: Flexible Port Speed. — In the Transport Profile: OSPFv3 IPv4 Routing, OSPFv3 IPv6 Routing, T1/E1 Controller — Subfeatures for transport VPN: OSPFv3 IPv4 Routing, OSPFv3 IPv6 Routing, T1/E1 Serial, DSL PPPoE, DSL PPPoA, DSL IPoE, Ethernet PPPoE — In the Service Profile: OSPFv3 IPv4 Routing, OSPFv3 IPv6 Routing, EIGRP Routing, Object Tracker, Object Tracker Group — Subfeatures for service VPN: OSPFv3 IPv4 Routing, OSPFv3 IPv6 Routing, EIGRP Routing, Multilink Controller, Object Tracker, Object Tracker Group — The Route leak to Global VPN option is added to the Route Leak parameter in the service VPN. |
|
|
This feature supports dual devices site configuration using configuration groups, for redundancy. |
|
|
Device tagging has the following new functionalities: — When you add devices to a configuration group using rules, you can choose Match All or Match Any. — You can use Starts With and Ends With operator conditions when you add devices to a configuration group using rules. — In addition, the button formerly called Add New Tag is now Create New Tag. |
|
|
VFR (Virtual Fragmentation Reassembly) and Underlay Fragmentation |
The VFR mechanism reassembles fragmented packets in Cisco Catalyst SD-WAN networks. The packets are fragmented for better transportion and are fragmented while they are travelling through a VFR enabled Cisco IOS XE Catalyst SD-WAN device. Underlay fragmentation fragments packets in the underlying layer of a network. Underlay fragmentation is introduced to easily transport larger packets that exceed the (MTU). |
|
Enhanced Cisco Catalyst SD-WAN Manager Dashboard for Multitenancy |
This feature is enhanced to support consistent user experience in tenant and service providers dashboard. The Cisco Catalyst SD-WAN Manager dashboard provides visibility into the available resources on shared devices. |
|
This feature enables support for Remote Authentication Dial-In User Service (RADIUS) and Terminal Access Controller Access Control System (TACACS) authentication in a multitenant deployment on WAN edge devices. |
|
|
This feature is enhanced to support NAT to enforce per tenant maximum limit on the translations. From this release Tier is called Resource Profile in Cisco SD-WAN Manager. |
|
|
Cisco Catalyst SD-WAN Routing Configuration Guide |
|
|
A transport gateway operates as the hub in a hub-and-spoke routing topology. It offers the advantage of achieving this topology without requiring complex routing policy configuration. The following are some uses of a transport gateway:
|
|
|
Hub-and-spoke configuration simplifies the process of configuring a hub-and-spoke topology, making complex centralized control policy unnecessary. Instead, the configuration requires only a few simple configurations: a single command each on (a) the Cisco SD-WAN Controllers serving a network, (b) a router that serves as a hub, and (c) the routers that operate as spokes. |
|
|
You can use affinity groups, affinity group preference, and translation of RIB metrics to ensure symmetric routing of traffic flows across devices in a network. Symmetric routing accommodates various network topologies, including Multi-Region Fabric. To support symmetric routing beyond the overlay network, transport gateways can translate RIB metrics to control plane protocols such as BGP and OSPF. This extends the path preference configuration to routers outside of the overlay network, such as routers in a data center LAN. |
|
|
Cisco Catalyst SD-WAN Policies |
|
|
With this feature, you can apply the recommendations that are available on vAnalytics to Cisco SD-WAN Manager AAR policy and view the applied recommendations on Cisco SD-WAN Manager. |
|
|
When you configure a loopback interface as an ingress or egress transport interface, this feature enables you to collect loopback interface reports in FNF records and is supported for IPv4 and IPv6. A show command is enhanced on the device to display the binding relationship between the loopback and physical interfaces. |
|
|
This feature lets you configure intercepts in the Cisco Catalyst SD-WAN multitenancy mode, and also provides support for Cisco Catalyst SD-WAN Manager clusters. |
|
|
This feature introduces logging enhancements to Cisco Flexible NetFlow for Cisco SD-WAN Analytics. The output of the show flow record command has been enhanced for IPv4 and IPv6 flow records. |
|
|
Without enhanced application-aware routing enabled, Cisco IOS XE Catalyst SD-WAN device require several minutes to switch traffic from one network path to another to meet SLA requirements when the loss, latency, and jitter exceed specific threshold values. Enabling enhanced application-aware routing speeds the detection of tunnel performance issues. This enables Cisco IOS XE Catalyst SD-WAN devices to redirect traffic away from tunnels that do not meet SLA requirements. |
|
|
Cisco Catalyst SD-WAN Security |
|
|
This feature adds support for Snort engine version 3, which is an upgrade from version 2. |
|
|
IPv6 GRE or IPsec Tunnels Between Cisco Catalyst SD-WAN and Third-Party Devices |
This feature allows you to configure an IPv6 GRE or IPSEC tunnel from a Cisco IOS XE Catalyst SD-WAN device device to a third-party device over a service VPN. |
|
This feature adds support for enabling MACsec using Cisco SD-WAN Manager for Cisco Catalyst SD-WAN devices on the service side. With MACsec enabled using Cisco SD-WAN Manager, communication between devices in the service VPN is protected, thus enhancing security for the service VPN. |
|
|
The OMP routes are typically present in the IOS RIB. The OMP routes aren't present in the IOS FIB containing entries that map destination IP addresses to next-hop IP addresses. The IOS FIB operates independently of the control plane, receiving the forwarding instructions from a centralized Cisco SD-WAN Controller instead of consuming the OMP routes from the IOS RIB. Starting from Cisco IOS XE Catalyst SD-WAN Release 17.12.1a, the OMP prefixes get added to the IOS FIB which improves IP-SGT binding. |
|
|
Cisco Catalyst SD-WAN Cloud OnRamp |
|
|
AWS Cloud WAN is a managed wide-area network (WAN) service. This feature enables you to easily connect and route remote sites, regions and cloud applications over the AWS global network. You can build and operate the wide-area networks using simple network policies and get a complete view of the global network. |
|
|
For the Microsoft Azure West Central US and Australia East regions, added the Standard_D16_v5 Azure instance type, which includes 16 CPU cores and 64 GB of memory. You can deploy this type of instance for SKU scale values of 20, 40, 60, and 80. |
|
|
You can deploy a Cisco Catalyst 8000v Edge Software as the Interconnect Gateway in the Equinix fabric and connect an Cisco Catalyst SD-WAN branch location to the Interconnect Gateway. |
|
|
You can add or modify additional properties of Virtual Private Cloud (VPC) and Virtual Networks (VNets) tags that are associated with a connection. |
|
|
You can identify the gaps or disconnects between Cisco SD-WAN Manager intent and what is realized in the cloud. The audit management helps in understanding if the interconnect cloud and provider states are in sync with the Cisco SD-WAN Manager state. |
|
|
Cisco Catalyst SD-WAN Policy Groups |
|
|
This feature provides a simple, reusable, and structured approach for configuring policies in Cisco Catalyst SD-WAN. You can create a policy group, that is, a logical grouping of policies that is applied to one or more sites or a single device at the site in the network. To deploy the policy group to devices, the devices must be managed by a configuration group in Cisco Catalyst SD-WAN. You can configure policies based on features that are required, recommended, or uniquely used, and then combine them to complete a policy configuration. |
|
|
This feature provides a simple, reusable, and structured approach for configuring security policies in Cisco Catalyst SD-WAN. You can create a security policy, that is, a logical grouping of policies that is applied to one or more sites or a single device at the site in the network. To deploy the policy group to devices, the devices must be managed by a configuration group in Cisco Catalyst SD-WAN. You can configure policies based on features that are required, recommended, or uniquely used, and then combine them to complete a policy configuration. |
|
|
This feature allows you to provision a Mesh or a Hub and Spoke topology policy which is applied to Cisco Catalyst SD-WAN Controllers. This allows exchange of data traffic between two or more Cisco IOS XE Catalyst SD-WAN devices. |
|
|
Cisco Catalyst SD-WAN Monitor and Maintain |
|
|
In the heatmap view, a grid of colored bars displays the alarms as Critical, Major, or Medium & Minor. You can hover over a bar or click it to display additional details at a selected time interval. The intensity of a color indicates the frequency of alarms in a severity level. |
|
|
In the heatmap view, a grid of colored bars displays the events as Critical, Major, or Minor. You can hover over a bar or click it to display additional details at a selected time interval. The intensity of a color indicates the frequency of events in a severity level. |
|
|
This feature introduces enhanced audit logging to monitor unauthorized activity. To view these audit logs, from the Cisco SD-WAN Manager menu, choose . |
|
|
This feature provides enhancements to the Network-Wide Path Insight feature to include support for multiple VPNs for traces, the ability to generate synthetic traffic for traces, options for grouping trace information, support for auto-on tasks, new information on insight displays, and expanded insight summaries. |
|
|
Cisco Catalyst SD-WAN NAT |
|
|
You can configure NAT66 to use multiple WAN Links to direct local IPv6 traffic to exit directly to the internet. |
|
|
Cisco Catalyst SD-WAN Remote Access |
|
|
Cisco Catalyst SD-WAN Remote Access Configuration in SSL-VPN mode Using Cisco SD-WAN Manager |
This feature enables you to configure Cisco Catalyst SD-WAN Remote Access for a device in SSL-VPN mode, using Cisco SD-WAN Manager. |
|
User Login Options |
|
|
You can to configure Cisco SD-WAN Manager to lock out users who have not logged in for a designated number of consecutive days. |
|
|
You can configure Cisco SD-WAN Manager to lock out users who have made a designated number of consecutive unsuccessful login attempts within a designated period. |
|
|
You can configure Cisco SD-WAN Manager to require Duo multifactor authentication (MFA) to verify the identity of users before they can log in to Cisco SD-WAN Manager. |
|
|
Cisco IOS XE SD-WAN Qualified Command Reference |
|
|
The following troubleshooting commands are added:
|
|
|
This command allows you to lock out users who have made a designated number of consecutive unsuccessful login attempts within a designated period, or who have not logged in for a designated number of days |
|
|
This command allows you to require Duo multifactor authentication (MFA) to verify the identity of users before they can log in. |
|
New and Enhanced Hardware Features
New Features
-
Support for Cisco SM-X-1T3/E3 Module: Cisco SD-WAN Manager CLI device templates now supports Cisco SM-X-1T3/E3 module.
-
Support for Cisco Managed Cellular Activation (eSIM): The Managed Cellular Activation solution provides a programmable subscriber identity module (SIM), called an eSIM, a physical SIM card that you can configure with a cellular service plan of your choice. Managed Cellular Activation is available for the 5G Sub-6 GHz Pluggable Interface Module (PIM), model P-5GS6-GL, and for the Cisco Catalyst Wireless Gateway 113-4GW6.
The solution also provides a "bootstrap" cellular plan with limited data for connecting your device to the internet on Day 0. You need to set up your cellular plan details in Cisco SD-WAN Manager before you power on and onboard the device. This way, you can avoid using up the data provided with the device before your onboarding is completed.
For information about configuring Cisco SD-WAN Manager with the details of your cellular plan in preparation for onboarding the device, see the Cisco Managed Cellular Activation Configuration Guide.
Note
In this context, eSIM refers to a removable SIM pre-installed by Cisco. In other contexts, eSIM can refer to a non-removable SIM embedded in a cellular-enabled device.
Software and Hardware Behavior Changes in Cisco IOS XE Catalyst SD-WAN Release 17.12.x
Software and Hardware Behavior Changes in Cisco IOS XE Catalyst SD-WAN Release 17.12.5
|
Behavior Change |
Description |
|---|---|
|
Mandatory Tenant ID and VPN ID with Prefix address for show sdwan omp routes command. |
Starting from Cisco IOS XE Catalyst SD-WAN Release 17.18.1a, Cisco IOS XE Catalyst SD-WAN Release 17.15.1a, and Cisco IOS XE Catalyst SD-WAN Release 17.15.2, the show sdwan omp routes command requires you to specify both the tenant ID and VPN ID when using a prefix address. |
Software and Hardware Behavior Changes in Cisco IOS XE Catalyst SD-WAN Release 17.12.2
|
Behavior Change |
Description |
|---|---|
|
Added support for certificates that do not have a matching Organizational Unit (OU) field: When onboarding a device, if the associated enterprise certificate has one or more OU fields defined, Cisco Catalyst SD-WAN does not require that any of the OU fields match the organization name of the fabric. |
The Configure Enterprise Certificates for Cisco SD-WAN Controllers section describes the behavior. |
|
For all ISR1100 platforms, before changing the resource profile, you must reboot the device. Performing a reboot improves the perfomance of ISR1100 platforms. |
The Supported Platforms section in the Unified Threat Defense Resource Profiles chapter describes the behavior. |
|
Added an advanced telemetry option to enable Cisco SD-WAN Manager to collect anonymized data for the Cisco Catalyst SD-WAN Data Collection Service (DCS). |
The Enable or Disable Cisco Catalyst SD-WAN Telemetry section describes the option. |
Software and Hardware Behavior Changes in Cisco IOS XE Catalyst SD-WAN Release 17.12.1a
|
Behavior Change |
Description |
|---|---|
|
You cannot include a comma in the Organization Name field of the bootstrap configuration file. |
The Enable Reverse Proxy and Cisco Catalyst SD-WAN Overlay Network Bring-Up Process sections are updated twith a note on the new behavior. |
|
The Viptela-User-Group and Viptela-Resource-Group tags are used in RADIUS and TACACs configurations for accounting and authorization. |
The Configure the Authentication Order section is updated with a note on new tag definitions. |
|
A restriction for rebooting a control manage is added. |
The Connect Cisco SD-WAN Manager VM Instance to Cisco SD-WAN Manager Console section is updated with the restriction. |
|
Device variable names can contain the following special characters dots (.), forward slashes (/) and square brackets ([]). |
The Configure Device Values section is updated with the new support for special characters. |
|
Bar chart to display changes from the previous time period. |
The following sections are updated in the Cisco SD-WAN Manager Monitor Overview dashboard with information about the dashlets displaying a bar chart showing the changes from the last time period: |
|
A new command to run diagnostics on a Cisco Catalyst SD-WAN Manager cluster. |
The Troubleshooting Commands chapter has been updated with a new command vdiagnose vmanage cluster. |
|
Change in the severity value of a few alarms. |
The Alarms chapter has been updated with the change in the alarm severity value for the following alarms:
|
|
New commands that display details of alarms that are generated in Cisco SD-WAN Manager. These commands provide better readability into the alarms. |
The Troubleshooting Commands chapter has been updated with the show sdwan alarms detail and show sdwan alarms summary commands. |
|
In addition to routers in controller mode, from Cisco Catalyst SD-WAN Manager Release 20.12.1, Cisco SD-WAN Manager can monitor routers that are in autonomous mode and not part of the Cisco Catalyst SD-WAN overlay network. These routers appear with the label SD-Routing in the Device Model column to distinguish them from routers that are part of the overlay network. |
Updated the View Controller and Device Information section to describe the new behavior. |
|
You can configure a global certificate authority using the option in Cisco SD-WAN Manager. In earlier releases, there was an option that provided the same functionality, but that option has been removed in this release. |
See the Certificate Management section for information about certificates. |
|
You can commit the configuration before rebooting a control manage device through Cisco Catalyst SD-WAN Manager. |
The Cisco SD-WAN Manager Console section is updated to describe the new behavior. |
|
In Cisco SD-WAN Manager, auth-no-priv authentication algorithm is not supported. |
The Configure SNMP on Cisco IOS XE Catalyst SD-WAN Devices section is updated with the support details. |
|
Use the tools consent-token command to authenticate the network administrator of an organization to access system shell. Starting Cisco Catalyst SD-WAN Manager Release 20.12.1, the request support ciscotac command is deprecated. |
The Ciscotac User Access section is updated to describe the new behavior. |
|
Authorization rule for vshell is limited to only netadmin users. |
The User Authorization Rules table in the Role-Based Access Control chapter is updated with the new rule. |
|
In a Microsoft Azure setup, to allow packets with IPv6 Unique Local Addresses (ULA) on the device, configure the enable-ipv6-unique-local-address command to enable or disable these addresses. |
The Deploy Cisco Catalyst SD-WAN Controllers in Azure: Tasks section is updated to describe the new behavior. |
|
If multiple Azure Virtual WAN hubs are there in a region, you can select a particular Azure Virtual WAN hub for that region. Once you choose the Azure Virtual WAN hub, all subsequent connections created for Azure Virtual WAN uses the same Azure Virtual WAN hub. |
See the Virtual WAN Setting for Megaport and Virtual WAN Setting for Equinix sections for more information. |
|
You have the option to choose to delete Express-Route and vWan at the time of deletion. When you delete a GCP connection, you can optionally select to delete the Google Cloud Router, or manage these resources as required. |
See the Delete Connection section for more information. |
|
The Application Monitoring feature is enabled with read and write permission. |
See the User Group Permissions:Cisco IOS XE Catalyst SD-WAN devices for more information. |
|
The mutual authentication option is enabled with read and write permission. |
See the User Group Permissions:Cisco IOS XE Catalyst SD-WAN devices for more information. |
Important Notes, Known Behaviors, and Workarounds
SFP-10G-SR module
Cisco IOS XE Catalyst SD-WAN devices with the SFP-10G-SR module do not support online insertion and removal (OIR) of the module.
Software maintenance upgrade (SMU)
The minimum supported release for software maintenance upgrade (SMU) is Cisco IOS XE Catalyst SD-WAN Release 17.12.3a. It was previously described as Cisco IOS XE Catalyst SD-WAN Release 17.12.1a. See Supported Devices for Software Maintenance Upgrade.
esp-null Deprecated
In Cisco IOS XE Catalyst SD-WAN Release 17.12.1a, the esp-null encryption algorithm is deprecated. When configuring Secure Internet Gateways (SIG), selecting the NULL-SHA1 cipher will invoke esp-null and result in template push failures. To avoid deployment errors, configure SIG with a supported encryption algorithm.
Disaster Recovery
The user account used for disaster recovery supports only local authentication and does not support remote authentication methods such as TACACS+ or RADIUS. This user must be dedicated solely to disaster recovery tasks and must not be used for any other functions, such as cluster management because of the following reasons:
-
Reliability: Using dedicated accounts for DR sync minimizes configuration errors and reduces operational risks.
-
Resilience: Prevents issues related to user lockouts or account overrides, ensuring DR processes are not impacted by administrative changes to other accounts.
-
Audit and compliance: Dedicated users provide clear separation for auditing purposes, making it easier to track and log DR-related activities.
-
Industry standard: All our customers, including those in highly regulated sectors such as finance, follow this model. It is the recommended and supported deployment standard.
-
Avoid remote authentication issues: TACACS-based users are prone to disruptions due to potential latency or connectivity issues with remote authentication servers. Using local accounts eliminates these risks, ensuring uninterrupted DR sync and cluster operations.
-
Password rotation: Capabilities are provided via API/GUI on active cluster and through CLI on standby cluster.
TLOC extension configuration
If a device
-
is using Cisco IOS XE Catalyst SD-WAN Release 17.9.x or earlier, and
-
the device has a tunnel interface configuration includes a TLOC extension,
then you cannot upgrade to one of these:
-
17.12.1 through 17.12.4
-
17.15.1 through 17.15.2
Attempting such an upgrade causes the device to crash and enter a rollback state.
If you have a TLOC extension configured and need to perform such an upgrade, remove the TLOC extension configuration from the tunnel interface configuration before upgrading.
This issue was fixed and does not apply for upgrades from one of these releases:
-
17.12.5 and later releases of 17.12.x
-
17.15.3 and later releases of 17.15.x
-
17.18.1a and later
Resolved and Open Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.x
This section details all fixed and open bugs for this release. These bugs are available in the Cisco Bug Search Tool
Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.6
Resolved Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.6
|
Identifier |
Headline |
|---|---|
|
cxpd experiences a memory leak when HTTPs endpoint probing has more than 2 second RTT. |
|
|
Cisco IOS and IOS XE Software SNMP: Denial of service and remote code execution vulnerability. |
|
|
Cisco IOS XE Catalyst SD-WAN device fragments the packets with interface MTU instead of tunnel PMTU. |
|
|
E-AAR Local Loss does not work on COFF Platforms. |
|
|
DNS Channel uses same source port in every connection. |
|
|
Reloading the hardware module subslot with a DIA interface disables CXP on those interfaces. |
|
|
Flow stickiness has an issue when NAT fallback is used. |
|
|
Users observe a speed test download/throughput issue on the C8200 platform when using IPSEC ESP-NULL transform with Zscaler. |
|
|
The system loses the default route after moving from a physical interface to a sub-interface. |
|
|
The system replies to unknown unicast packets with a non-self MAC address on a GRE tunnel. |
|
|
IP sla probes are not created for DIA endpoint-tracker after upgrading to Release 17.12.5a. |
|
|
BFD Packet drops on ATM interface after upgrade. |
|
|
Unexpected reload on Cisco IOS XE Catalyst SD-WAN device due to NWPI trace elephant flow. |
|
|
BFD offload causes the IPv6 BFD session sourced from a loopback (unbind) to go down. |
|
|
SLA events do not get the correct values from the Cisco IOS XE Catalyst SD-WAN device. |
|
|
Static default route is not installed in routing table due to issue with track-default-gateway. |
|
|
The C1100 router experiences high CPU usage after a reload. |
|
|
Flow stickiness does not work when match based on app-family. |
|
|
IPSec umbrella tunnels are going down everytime umbrella side executes the rekey. |
|
|
Data Policy SIG action with CoR SaaS DIA path blackholes DNS traffic. |
|
|
All BFD sessions for dialer interfaces are down. SA ID is 0 for all of them. |
|
|
A critical process ompd fault occurs on rp_0_0 restart with return code (rc) 134. |
Open Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.6
|
Identifier |
Headline |
|---|---|
|
Cisco IOS XE Catalyst SD-WAN device: cexperiences high CPU utilization by confd_cli after executing "show omp tlocs". |
|
|
Cisco IOS XE Catalyst SD-WAN device Service Side BFD flaps. |
|
|
After a WAN failover, the IPsec tunnel takes more than 12 hours to recover. |
|
|
Cisco IOS XE Catalyst SD-WAN device unexpectedly reloads due to memory corruption on a notification queue in FTMd. |
|
|
SDWAN NAT timedout sessions are not removed. |
|
|
The APN password appears in plain text when users configure the Cellular controller profile. |
|
|
Cisco IOS XE Catalyst SD-WAN device may boot up into prev_packages.conf due to power outage. |
|
|
The 'pppoe-client dial-pool-number' configuration under the Ethernet interface fails. |
|
|
cEdgeElixirwifi: native Vlan config is not loaded by configuration reset on WLAN Interface. |
|
|
The system removes unused code used for collecting data plane statistics in the background. |
|
|
The system experiences continuous unexpected reloads due to a "Critical process cfgmgr fault on rp_0_0". |
|
|
The OMPd process crashes due to a Sig-abort when it hits the Pthread limit. |
|
|
Cisco IOS XE Catalyst SD-WAN device experiences a traceback and reloads after detecting a fatal error in qfp-ucode-radium. |
|
|
SDWAN-SIT: During a soak run, SD-WAN SIT Encore crashes at bfd_send_and_detect_sleep_time. |
|
|
OMP to BGP redistribution leads to incorrect AS_Path installation on the chosen next-hop. |
|
|
Bender: Observed crash on bfd_proxy_ipc_response_handler. |
Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.5b
Resolved Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.5b
|
Identifier |
Headline |
|---|---|
|
E-AAR local loss does not work on COFF Platforms. |
|
|
DNS Channel uses same source port in every connection. |
|
|
Large number of BFD sessions are stuck due to out of window drops reported with control connections NAT flaps. |
|
|
BFD Packet drops on ATM interface after upgrade. |
|
|
Tunnel delete/create flaps unexpectedly for PWK case for private control NAT changes. |
|
|
SLA events not getting the correct values from the Cisco IOS XE Catalyst SD-WAN device. |
|
|
SD-WAN (Cisco IOS XE Catalyst SD-WAN device/Cisco vEdge device) : BFD flap on public IP change on a private color TLOC. |
Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.5a
Resolved Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.5a
|
Identifier |
Headline |
|---|---|
|
The rekey fails in the PWK and Non-PWK interworking use case. |
|
|
Longevity traffic with triggers causes an FMAN_FP crash. |
|
|
The router reaches the total limit for "show ip nat translations" despite having a low number of active NAT table entries. |
|
|
The ftmd crashed when SIG GRE tunnels configurations were removed. |
|
|
Custom applications may not be programmed properly. |
|
|
After a power cycle, an error stating "Authentication failed" prevents login to the router. |
|
|
Executing "show sdwan ftm" CLI commands at scale causes the confd_cli process to show high CPU usage and hang. |
|
|
Rapid FTMd leak on Cisco IOS XE Catalyst SD-WAN device due to event-driven UMTS records building up. |
|
|
After a reboot on a spoke with a dual-stack WAN (IPv4 and IPv6), BFD sessions fail to initialize. |
|
|
An OMP route is advertised even though the route is unavailable due to the network statement and NAT DIA VPN configuration. |
|
|
Cisco IOS XE Catalyst SD-WAN device repeatedly crashes in FTMd due to FNF Flow additions.. |
|
|
In the SDWAN setup, the SAIE application shows "No Data to Display" over the Cisco SD-WAN Managerfor the IOS XE router. |
|
|
A certificate update for the ios_core.p7b bundle is required for Umbrella DNS using the TOKEN method on versions 17.6/.9/.12. |
|
|
Return traffic for Outside to Inside NAT received on one TLOC is forwarded out through another TLOC. |
|
|
Executing "show ip nat translation" unexpectedly causes a reboot. |
|
|
When using switchport, SNMP returns incorrect values for the interface. |
|
|
Drops occur due to IpsecOutput issues with the error OUT_IPV4_SA_NOT_FOUND. |
|
|
Optimizing encrypted traffic with DRE causes the router to crash. |
|
|
The IPSEC fix addresses the issue where IPv6 BFD fails to establish with edges in private network controllers operating in a public network. |
|
|
Removing and re-adding NAT intermittently causes BFD to go down. |
|
|
Cisco IOS XE Catalyst SD-WAN device uninstalls UTD before committing the configuration to the candidate datastore, and if the commit fails, UTD is not reinstalled. |
|
|
SLA-Change events display incorrect information, showing "None" for both old-sla and new-sla values. |
|
|
An unexpected reboot due to ftdm process after a change on a configuration template on a Cisco IOS XE Catalyst SD-WAN device router. |
|
|
The vmanage-stats-db for firewall continues to increase in size without stabilization. |
|
|
Cisco IOS XE Catalyst SD-WAN device: The data-policy local-tloc-list disrupts the RTP media stream. |
|
|
Configuring route-aggregate from the Cisco SD-WAN Manager without the 'aggregate-only' option appears misleading. |
|
|
Multiple SKA clients accessing the pubkey table on IOS-XE causes an unexpected reload. |
|
|
Shortly after enabling Enhanced Application-Aware Routing, a crash is observed. |
|
|
Continuous endpoint tracker log messages appear when a DNS query fails in the tracker-group. |
|
|
Certain OMP routes return the error "% No such element exists" if the prefix length is not included. |
|
|
Cisco IOS XE Catalyst SD-WAN device: A crash is observed during the imgr_ipsec_sa_seqno_ctx_restore process. |
|
|
Cisco IOS XE Catalyst SD-WAN device: High memory utilization due to "ftmd" process. |
|
|
An unexpected reload occurs in IOS-XE due to a stuck thread with NAT BPA configuration. |
|
|
Software crash with Critical process vip_confd_startup_sh fault on rp_0_0 (rc=6) |
|
|
Cisco IOS XE Catalyst SD-WAN device: An unexpected reload occurs after an overlay session deletion during the AVL tree removal process. |
|
|
17.12.4 Respin: BFD goes down with private color behind NAT for carrier7 and carrier8. |
|
|
Observing crash related to packet reassembly. |
|
|
After a router reload, the Zscaler SSE tunnel is incorrectly established using the TLOC extension. |
|
|
AAR BOW is not selecting the best tunnel; instead, it is load balancing among the tunnels. |
|
|
Cisco IOS XE Catalyst SD-WAN device unexpectedly reloads due to a crash in 'vdaemon' process |
|
|
Running the incomplete command "show sdwan app-route stats local-color" mistakenly causes a crash. |
|
|
Cisco IOS XE Catalyst SD-WAN device advertises component routes temporarily even if omp aggregate-only is configured. |
|
|
Crash seen with Enhanced Application-Aware Routing feature (additional code changes for CSCwn16182). |
|
|
NAT DIA traffic is dropped due to port allocation failure. |
|
|
The appRouteStatisticsTable sequence is misordered in the CISCO-SDWAN-APP-ROUTE-MIB, or the OS returns the sequence in the wrong order. |
|
|
Cisco SD-WAN Manager Control Connection does not come up with local dialer when remote Cisco IOS XE Catalyst SD-WAN device uplink is down. |
|
|
Cflowd displays custom APP as "unknown" for egress traffic when using DRE optimization. |
|
|
IPv6 BFD fails to establish connections with edges in private network controllers operating within a public network. |
|
|
NAT DIA packets randomly dropped due to Ipv4RoutingErr. |
|
|
AppQoE: Increase performance for long-lived flows. |
|
|
A memory leak occurs in fman-fp cce-class-grp when using per-tunnel QoS policy during BFD session flaps. |
|
|
Cisco IOS XE Catalyst SD-WAN device: When image expansion fails due to insufficient disk space, the system image file is not set to packages.conf. |
Open Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.5a
|
Identifier |
Headline |
|---|---|
|
The IP name-server command was not pushed to Cisco IOS XE Catalyst SD-WAN device. |
|
|
[SITLite]: All BFD sessions for dialer interfaces are down. SA ID is 0 for all of them. |
|
|
Active FTP is not working with UTD+HTX for security and unified policy for DIA in version 17.12.5. |
|
|
cEdgeElixirwifi: Native VLAN configuration is not loaded by config reset on the WLAN interface. |
|
|
In version 17.12.5, the single endpoint DIA tracker fails to come up after a router reload and clearing PPP. |
Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.4b
Resolved Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.4b
|
Identifier |
Headline |
|---|---|
|
Per-tunnel QoS convergence slows down when the number of policy-map instances increases. |
|
|
Observed crash on imgr_ipsec_sa_seqno_ctx_restore. |
|
|
Multicast drops seen due to IpsecOutput drops - OUT_IPV4_SA_NOT_FOUND |
|
| CSCwn52348 |
The Remove and Re-add NAT causes BFD to go down (Intermittent). |
|
The confd_cli processes experience high CPU usage and may hang when executing show sdwan ftm CLI commands at scale. |
|
|
Pairwise keying affects every single BFD session, causing up/down status changes that trigger tunnel delete and create events. |
Open Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.4b
|
Identifier |
Headline |
|---|---|
|
17.12.4 Respin BFD down with private color behind NAT for carrier7 and carrier 8 |
Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.4a
Resolved Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.4a
|
Identifier |
Headline |
|---|---|
|
High CPU utilisation for confd_cli |
|
|
17.12 incorrect debug print in BFD rx pkt processing is causing issue. |
|
|
SDWAN BFD sessions flapping during IPSec rekey in scaled environment. |
|
|
SSL handshake fails despite umbrella_root_ca.ca with latest certificate being present on the device. |
|
|
Tracker group with DNS endpoint does not recover after going down due to DNS query error. |
|
|
After [non]pairwise key enabling and reboot, bfd ip and port mismatch on device. |
|
|
Add FNF cache limit for show sdwan app-fwd flows for CSCwj02401. |
|
|
FTMd crashes after receiving credentials feature template update from Cisco SD-WAN Manager. |
|
|
17.17.1 After change integrity-type twice, all bfd sessions will be down. |
|
|
FW dropping VPN traffic even after zone-pair policy is removed. |
|
|
%PMAN-0-PROCFAILCRIT: R0/0: pvp: A critical process vip_confd_startup_sh has failed (rc 6) |
|
|
VRRP switchover with tloc preference change is generating rekey and crypto add/delete events. |
|
|
Cisco IOS XE Catalyst SD-WAN device crashed while stuck at fme_tbs_tw_timer_lock |
|
|
Cisco IOS XE Catalyst SD-WAN device crashed when issuing "show sdwan ftm next-hop chain all" |
|
|
Cisco IOS XE Catalyst SD-WAN device crash with critical process vip_confd_startup_sh fault due to huge number of zbfw-dp sessions. |
|
|
IPSec Auto AR Recovery. |
|
|
Add event cause in IPSEC vesen log. |
Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.4
Resolved Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.4
|
Identifier |
Headline |
|---|---|
|
Some duplicated packets are dropped when there are frequent BFD flaps on primary path transport. |
|
|
[SITLite]Observing BFD down issue between Cisco IOS XE Catalyst SD-WAN device boxes. |
|
|
C1117-4PLTEEA platform crashed with sh pl hard qfp ac feat cef-mpls prefix IP 10.40.201.10/32 vrf 2 |
|
|
The QFP/CPP crash when handling non-first fragmented TCP packet in DIA interface with "art-aggregated" |
|
|
Tunnel interface tracker stopped working after upgrading the Cisco IOS XE Catalyst SD-WAN device to 17.12.3 |
|
|
snmpwalk for OID ifOperStatus gives different output before & after upgrade for serial interface. |
|
|
MT-Edge: Cisco IOS XE Catalyst SD-WAN device device created a core file and rebooted with 17.14 image. |
|
|
Service-side NAT Translation discrepancy. |
|
|
Crash on ISR1K router (double free or corruption). |
|
|
Cisco IOS XE Catalyst SD-WAN device crashed twice with Critical process linux_iosd_image fault on rp_0_0 |
|
|
"dmidecode: command not found" error seen executing "show sdwan certificate validity" |
|
|
Cisco IOS XE Catalyst SD-WAN device router crashing due to ftmd. |
|
|
Cisco IOS XE Catalyst SD-WAN device: IPv4 NAT routes redistributed into OMP gets tagged as origin-proto = proto-invalid. |
|
|
Cisco IOS XE Catalyst SD-WAN device device may unexpectedly reload due to SIGABRT |
|
|
UTD signature update failure and device not recording the update. |
|
|
Tunnel destination not getting set on sig sub-interfaces due to DNS timing out. |
|
|
Speed-test not working for the Cisco IOS XE Catalyst SD-WAN device running on code 17.12.2 |
|
|
VFR enablement difference with NAT interface vs NAT pool configuration. |
|
|
Cisco IOS XE Catalyst SD-WAN device performing NAT for Directly connected traffic. |
|
|
Configuration gets wiped out and restored, UTD container uninstalled. |
|
|
Install UTD image using remoter server with hostname is not working. |
|
|
20.12 MR1: Multicast traffic drops when Enhanced App-Aware Routing is enabled. |
|
|
[SIT]: SSE tunnels don't come up with Dialer interface.Relax check in IKE |
|
|
Cisco IOS XE Catalyst SD-WAN device with enterprise certificates not forming control connections with controllers after upgrade. |
|
|
SIG tunnel: 'SIG STATEâ is showing blank value. |
|
|
Cisco IOS XE Catalyst SD-WAN device: Unexpected reboot fman_fp_image fault on fp_0_0 (rc=134) |
|
|
The dns-snoop-agent has TCAM entry with all zeros for some regex patterns. |
|
|
Disabling PMTU-Discovery with MTU change and BFD flap breaks packet duplication. |
|
|
The 'show sdwan policy service-path' command gives inconsistent results with app name specified. |
|
|
If FPM failed and path changes from SIG to DIA, flow stickiness is not triggered. |
|
|
Cisco IOS XE Catalyst SD-WAN device may reload after enabling CDP. |
Open Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.4
|
Identifier |
Headline |
|---|---|
|
%PMAN-0-PROCFAILCRIT: R0/0: pvp: A critical process vip_confd_startup_sh has failed (rc 6) |
|
|
Cisco IOS XE Catalyst SD-WAN device repeatedly crashing in FTMd due to FNF flow add. |
|
|
Return traffic for Outside to Inside NAT traffic received on one TLOC is forwarded out of other TLOC. |
|
|
Cisco IOS XE Catalyst SD-WAN device crashed when issuing "show sdwan ftm next-hop chain all" |
|
|
SNMP returns incorrect value for the interface when using switchport. |
|
|
Multicast drops seen due to IpsecOutput drops - OUT_IPV4_SA_NOT_FOUND |
|
|
AAR BOW is not choosing the best tunnel; it is load balancing among the tunnels. |
|
|
FTMd crashes after receiving credentials feature template update from Cisco SD-WAN Manager. |
|
|
Cisco IOS XE Catalyst SD-WAN device: NAT64 prefix is not originated into OMP |
|
|
Memory leak seen due to bcti process due to lot of failed response. |
|
|
Mismatch between FTMD and TTMD causing IPSec tunnels to not come up in SDWAN. |
|
|
The snmpbulk request on Cisco IOS XE Catalyst SD-WAN device taking long time to process and respond |
|
|
SSD-M2NVME-2T is not detected on 17.9.4a |
|
|
The confd constantly crashing in cedge (sdwan router cat8200) |
|
|
Transport Gateway: WAN Edge Receives Re-Originated Route with it's own Site ID |
|
|
fman_fp Memory Leak on Cisco Catalyst 8500 Series Edge Platforms. |
|
|
Cisco IOS XE Catalyst SD-WAN device unexpectedly reloads due to a crash in 'vdaemon' process |
|
|
The appRouteStatisticsTable sequence misordered in CISCO-SDWAN-APP-ROUTE-MIB or OS returns wrong order |
|
|
Cisco SD-WAN Manager control connection does not come up with local dialer when remote-cedge uplink is down |
|
|
The add FNF cache limit for show sdwan app-fwd flows for CSCwj02401 |
|
|
Unexpected reboot when a HTTP connection failed with 404 on a controller mode router |
|
|
LTE TLOC not coming up unless all other TLOCs goes down. |
Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.3
Resolved Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.3
|
Identifier |
Headline |
|---|---|
|
EPBR FIA is not enabled on port-channel sub-interface. |
|
|
Cisco IOS XE Catalyst SD-WAN device does not install OMP route with high preference using service chaning. |
|
|
Tunnels behind Sym-nat does not come up or flap after "clear omp all" trigger on HUB. |
|
|
Fragmented radius access-request packets are dropped when NWPI is running. |
|
|
The show sdwan appqoe aoim-statistics - APPQOE services restart. |
|
|
MRF: OMP debugs does not print any reason why from another BR in the same region ignored. |
|
|
One of IPSEC IKE tunnel goes down when second IPSEC IKE tunnel has been shut with same source interface. |
|
|
Cisco IOS XE Catalyst SD-WAN device is incorrectly consuming icmp reply packets. |
|
|
Unexpected reboots on Cisco IOS XE Catalyst SD-WAN device due to QFP exception. |
|
|
Non-Fabric:With multiple interfaces in instance, using minimal bootstrap unable to onboard Cisco Catalyst 8000V. |
|
|
SDWAN org name matching one of the OU. This is not needed for Enterprise Certification Mode. |
|
|
The snmpbulkget cannot get loss, latency, and jitter for ProbeClassTable & ClassIntervalTable OIDs |
|
|
Cisco IOS XE Catalyst SD-WAN device reboot due to "Critical process vip_confd_startup_sh". |
|
|
Dialer interface blocking SIG Auto Tunnel workflow. |
|
|
Cisco IOS XE Catalyst SD-WAN device cflowd source interface for non-loopback interface does not get pushed to Cisco IOS XE Catalyst SD-WAN device. |
|
|
confd_cli processes hanging and are maxing out CPU. |
|
|
SymNat with low bandwith is not working. |
|
|
Cisco IOS XE Catalyst SD-WAN device is unable to process hidden characters in a file while trying to use bootstrap method. |
|
|
Cisco IOS XE Catalyst SD-WAN device lost security parameter after upgrade. |
Open Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.3
|
Identifier |
Headline |
|---|---|
|
AAR backup preferred color not working as expected from 17.12.1. |
|
|
The snmpwalk for OID ifOperStatus gives different output before & after upgrade for serial interface. |
|
|
Service-side NAT translation discrepancy. |
|
|
Cisco IOS XE Catalyst SD-WAN device: NAT64 prefix is not originated into OMP |
|
|
Cisco IOS XE Catalyst SD-WAN device : Tracker not working after software upgrade |
|
|
Cisco IOS XE Catalyst SD-WAN device router crash with reason "Critical process fman_fp_image fault on fp_0_0 (rc=134)" |
|
|
Speed-test not working for the Cisco IOS XE Catalyst SD-WAN device running on code 17.12.2. |
|
|
Install UTD image using remoter server with hostname is not working. |
|
|
[SIT]: SSE tunnels don't come up with Dialer interface.Relax check in IKE. |
|
|
SIG tunnel: 'SIG STATEâ is showing blank value. |
|
|
Solution: crash seen on fman_fp / ucode during longevity run (cpp_plu_alloc_v2). |
Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.2
Resolved Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.2
| Identifier | Headline |
|---|---|
|
BFD going down for newly onboarded Cisco IOS XE Catalyst SD-WAN device. |
|
|
Cisco IOS XE Catalyst SD-WAN device: confd_cli may cause high CPU. Parent PID of "confd_cli" containing "show ip fib". |
|
|
Issues seen due to race conditions between Cisco Catalyst SD-WAN policy and og-mgr on config-change. |
|
|
Cisco IOS XE Catalyst SD-WAN device: confd_cli high CPU utilization after executing "show sdwan app-route stats". |
|
|
Cisco Catalyst 8500L Edge Platform: Unexpectedly rebooted while classifying packet with CTF (Common Flow Table). |
|
|
Misprograming during vpn-list change under data policy. |
|
|
Intermittent BFD session flaps on Cisco IOS XE Catalyst SD-WAN device service side interface. |
|
|
Cisco IOS XE Catalyst SD-WAN device: DNS probes for endpoint-tracker API are sent on wrong interface. |
|
|
Crypto Map feature CLIs are unavailable in 17.12.1 |
Open Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.2
| Identifier | Headline |
|---|---|
|
The Per-Tunnel QoS policy with loopback as WAN bind mode is not working. |
|
|
Cisco IOS XE Catalyst SD-WAN device lost security parameter after upgrade. |
|
|
Service-side NAT Translation discrepancy. |
|
|
show sdwan appqoe aoim-statistics - APPQOE services restart. |
|
|
The trracker for TLOC extension is down even though TLOC is up and there is ICMP reachability. |
|
|
The APN password is in plain text when cellular controller profile is configured. |
|
|
One of IPSEC IKE tunnel goes down when second IPSEC IKE tunnel has been shut with same source interface. |
|
|
%EVENTLIB-3-CPUHOG: F0/0: fman_fp_image: uipeer downlink listener: |
|
|
There are unexpected reboots on Cisco IOS XE Catalyst SD-WAN device due to QFP exception. |
|
|
The 'Install UTD image' using remoter server with hostname is not working. |
|
|
Non-Fabric:With multiple interfaces in instance, unable to onboard Cisco Catalyst 8000V Edge Software using minimal bootstrap. |
|
|
Cisco IOS XE Catalyst SD-WAN device: NAT64 prefix is not originated into OMP. |
|
|
The Dialer interface is blocking SIG Auto Tunnel workflow. |
|
|
SDRA-SSLVPN : The sslvpn session closes with re-authentication error after some interval of time. |
|
|
17.12 SIG Zscaler IPSec UX2.0: Tracker for Tunnel15000001 is down after source interface swap. |
|
|
The secure-internet-gateway tunnels show no output for generic tunnels. |
|
|
OMP to BGP redistribution leads to incorrect AS_Path Installation on chosen Next-Hop. |
Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.1a
Resolved Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.1a
|
Identifier |
Headline |
|---|---|
|
Traceback during policy changes |
|
|
Cisco IOS XE Catalyst SD-WAN device : Traceroute not working with NAT pool configuration |
|
|
TLS control-connections down, traffic from controller dropped with Cisco Catalyst SD-WANImplicitAclDrop |
|
|
17.6: Route-map not getting effect when its applied in OMP for BGP routes |
|
|
CPP Ucode crash when Multicast traffic and UTD is enabled together on the same Cisco IOS XE Catalyst SD-WAN device |
|
|
Misprograming during policy changes |
|
|
FNF ucode crash when add or remove interface |
|
|
Device requested SLAC without customer issuing command |
|
|
The cat8500 Procyon Packets drop due to MACSEC post-encryption padding behavior |
|
|
CSR1000v upgrade fails from 17.3.4a to C8000v 17.6.5 due to "advertise aggregate" with vrf. |
|
|
AAR: BoW feature ignoring color preference from Tiered Transport preference configuration |
|
|
MPLS_NAT_OUTPUT_FIA is not enabled for TLOCs created after SSNAT data policy push |
|
|
The fugazi crash with qfp-ucode-fugazi in C8500L at @posix_mempool_prime_cache |
|
|
[SIT]: Nutella crashed and reboot history shows "IntelResetRequest" on upgrade |
|
|
17.10 - Crash seen when umbrella/zscaler template pushed to device when name_lookup takes > 30 sec |
|
|
Cisco 8300/85000 platform punt-policer is not configurable |
|
|
Same label is assigned to different VRFs |
|
|
Traffic is getting dropped with "Cisco Catalyst SD-WANDataPolicyDrop" with TunnelReason:MATCHED_NONE |
|
|
C8500-12X4QC P2MP WAN MACSEC does not allow traffic to pass on the link |
|
|
AAR overlay actions are applied to DIA traffic |
|
|
Cisco IOS XE Catalyst SD-WAN device BFD Session Down with interface flap |
|
|
Device replying with NAT pool IP address instead of the WAN IP address |
|
|
Invalid L4 Header drop due to multiple encap |
|
|
The AppQoE DRE shows the optimized traffic is more than the original traffic on the data center SCs |
|
|
C8300 dropping Speedtest/IPerf packets with drop reason DROP 19 (Ipv4NoRoute) |
|
|
Cisco IOS XE Catalyst SD-WAN device unexpected reload when doing ips test with UTD ips engine |
|
|
During Soak Run, On C8500L-8S4X, Memif channel's were missing and causing SC-SN state down |
|
|
Cisco IOS XE Catalyst SD-WAN device configured with 10G BDI might reload when running NWPI Trace with QoS Insight enabled |
|
|
SLA violation alarm shows incorrect reading of DSCP value |
|
|
Cisco IOS XE Catalyst SD-WAN device IPv6: removing "advertise aggregate" configuration does not remove the entry from OMP |
|
|
Cisco Catalyst SD-WAN BFD sessions keeps flapping intermittently |
|
|
Enable VFR CLI in Cisco Catalyst SD-WAN mode |
Open Bugs for Cisco IOS XE Catalyst SD-WAN Release 17.12.1a
|
Identifier |
Headline |
|---|---|
|
BFD going down for newly onboarded Cisco IOS XE Catalyst SD-WAN device |
|
|
OMP keeps advertising route after corresponding OSPF route removed if "advertise network" configured |
|
|
Umbrella Tunnels go to degraded state when default tracker is enabled. |
|
|
F0 Data Plane programming issue |
|
|
Unexpected reload on Cisco IOS XE Catalyst SD-WAN device due to cpp ucode crash |
|
|
Speed tests to internet from C8500 (17.9.3) triggered from Cisco SD-WAN Manager 20.9.3.1 will fail sometimes |
|
|
Crashed by TRACK Client thread at access invalid memory location |
|
|
Cisco IOS XE Catalyst SD-WAN device(C8500L) Unexpected rebooted while classifying packet with CTF (Common Flow Table) |
|
|
APN password in plain text when Cellular controller profile is configured |
|
|
Show run and Show Cisco Catalyst SD-WAN run not in sync after removing GigabitEthernet3 c8000v |
|
|
Cisco IOS XE Catalyst SD-WAN device: NAT64 prefix is not originated into OMP |
|
|
Intf/System xml files are not generated on Cisco IOS XE Catalyst SD-WAN device |
|
|
Intermittent BFD session flaps on Cisco IOS XE Catalyst SD-WAN device service side interface |
|
|
Misprograming during vpn-list change under data policy. |
|
|
Static route keep advertising via OMP even though there is no route. |
|
|
OMP to BGP Redistribution Leads to Incorrect AS_Path Installation on Chosen Next-Hop |
|
|
Multiple Crashes observed on Cisco IOS XE Catalyst SD-WAN device platform due to Memory Exhaustion |
Cisco Catalyst SD-WAN Control Components Compatibility Matrix and Server Recommendations
For compatibility information and server recommendations, see Cisco Catalyst SD-WAN Control Components Compatibility Matrix and Server Recommendations.
Supported Devices
For device compatibility information, see Cisco Catalyst SD-WAN Device Compatibility.
Cisco SD-WAN Manager GUI Changes
This section presents a comparative summary of the significant GUI changes between Cisco vManage Release 20.11.1 and Cisco Catalyst SD-WAN Manager Release 20.12.1.
Monitor Overview Page
Cisco Catalyst SD-WAN Manager Release 20.12.1 includes the following GUI changes to the page. For more information about the page, see Cisco SD-WAN Manager Monitor Overview.
-
The Global Topology view is called as Global Network View in Cisco SD-WAN Manager.
Figure 1. Global Network View in Monitor - Overview Page 
Click the eye icon to view the tunnel connection with aggregated tunnel health between the sites. Click the arrow on the left to open the network hierarchy menu.
Figure 2. Device Details for the Selected Site in Global Network View 
-
Cisco Catalyst SD-WAN Manager's security dashboard is enhanced to provide greater flexibility in troubleshooting security threats.
Figure 3. Enhancements to the Security Dashboard Through Modified Dashlets in the Monitor - Security Page 
Configuration Page
New submenus are added to the Configuration menu in Cisco Catalyst SD-WAN Manager menu.
New menus are available in the page to configure policy groups and security policies.
In-product Help
In a single-tenant deployment, access help content for Cisco SD-WAN Manager UI pages by clicking the Help icon at the top-right corner of a page. The help content is displayed in a slide-in pane in the same browser window.
Starting from Cisco SD-WAN Manager Release 20.12.x, In-product help is available for a majority of the Cisco SD-WAN Manager UI pages.
Cisco DNA Sense
Access help content for Cisco SD-WAN Manager UI pages using Cisco DNA Sense by clicking the ? icon at the top-right corner and choose Online Documentation from the drop-down list.
Cisco DNA Sense is not enabled by default for all the users. You should enroll and configure your Cisco SD-WAN Manager using the instructions provided in the Online Documentation pane. The help content from Cisco DNA Sense is displayed across all major Cisco SD-WAN Manager pages once you enroll.
If your Cisco SD-WAN Manager is already enrolled to Cisco DNA Sense, choose Online Documentation from the ? drop-down.
Ask Cisco Networking Bot
To access the Cisco Networking Bot click the Help(?) icon and choose Ask Cisco Networking from the drop-down list.
You can use Cisco Networking Bot chat to get relevant answers to your questions.
Related Documentation
Full Cisco Trademarks with Software License
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB's public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS" WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
All printed copies and duplicate soft copies of this document are considered uncontrolled. See the current online version for the latest version.
Cisco has more than 200 offices worldwide. Addresses and phone numbers are listed on the Cisco website at www.cisco.com/go/offices.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: https://www.cisco.com/c/en/us/about/legal/trademarks.html. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1721R)
Feedback