Verify Active VMs
On the router both the XR VM and the System Admin VM must be operational. Instances of both VMs should be running on every RP and LC . Complete this task to verify the VMs are active.
- show vm
Enters System Admin EXEC mode.
Displays the status of the VMs running on various nodes.
If a VM is not running on a node, in the output of the show vm command, no output is shown for that node.
What to do next
If the XR VM is not running on a node, try reloading the node. To do so, use the hw-module location node-id reload command in the System Admin EXEC mode. Also, use the show sdr command in the System Admin EXEC mode to verify that the SDR is running on the node.