- Feature History
- Using Ethernet Operations Administration and Maintenance
- ITU-T Y.1731 Performance Monitoring in a Service Provider Network
- Configuring Ethernet Connectivity Fault Management in a Service Provider Network
- G.8032 and CFM Support for Microwave Adaptive Bandwidth
- Transparent CFM
- Using Ethernet Fault Detection
- VLAN Translation with QoS
- Microwave ACM Signaling Configuration and EEM Integration
- Using Link Layer Discovery Protocol in Multivendor Networks
- Configuring Switched Port Analyzer
- Ethernet Virtual Connections Configuration
- EVC Local Connect
- Configuring Ethernet Local Management Interface at a Provider Edge
- Trunk EFP Support
- Configuring Pseudowire
- Configuring IEEE 802.1ad
- Configuring Latching Loopback
Feature History
The following table lists the new and modified features supported in the Carrier Ethernet Configuration Guide in Cisco IOS XE 16 releases, on Cisco NCS 4201 and Cisco NCS 4202 routers.
|
Feature Name |
Cisco IOS XE Release |
|---|---|
|
Layer 2 Control Protocol |
16.7.1 |
|
Latching Loopback |
The following table lists the new features supported in the Carrier Ethernet Configuration Guide in Cisco IOS XE 16 releases, on Cisco NCS 4206 and Cisco NCS 4216 routers.
|
Feature Name |
Cisco IOS XE Release |
|---|---|
|
Maximum Transmission Unit Support on Bridge Domain Interface |
16.12.1a |
|
BDI Statistics Support on RSP3 Module |
16.11.1a |
|
Layer 2 Hardware Protocol Forwarding on RSP3 |
|
|
BDI statistics Support on RSP3 Module |
16.9.3 |
|
Multi EFPs for Single BDI Support |
16.8.1b |
|
EVC Egress Filtering for the Cisco RSP3 Module |
16.7.1 |
|
Layer 2 Control Protocol |
|
|
Latching Loopback |
|
|
Split Horizon Enhancements |
16.6.1 |
Feedback