- Feature History
- Using Ethernet Operations Administration and Maintenance
- ITU-T Y.1731 Performance Monitoring in a Service Provider Network
- Configuring Ethernet Connectivity Fault Management in a Service Provider Network
- G.8032 and CFM Support for Microwave Adaptive Bandwidth
- Transparent CFM
- Using Ethernet Fault Detection
- VLAN Translation with QoS
- Microwave ACM Signaling Configuration and EEM Integration
- Using Link Layer Discovery Protocol in Multivendor Networks
- Configuring Switched Port Analyzer
- Ethernet Virtual Connections Configuration
- EVC Local Connect
- Configuring Ethernet Local Management Interface at a Provider Edge
- Trunk EFP Support
- Configuring Pseudowire
- Configuring IEEE 802.1ad
- Configuring Latching Loopback
Carrier Ethernet Configuration Guide, Cisco IOS XE 16 (Cisco NCS 4200 Series)
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- July 30, 2019
Feedback