lawful-intercept disable
To disable the Lawful Intercept (LI) feature, use the lawful-intercept disable command. To re-enable the LI feature, use the no form of this command.
lawful-intercept disable
no lawful-intercept disable
Syntax Description
This command has no keywords or arguments.
Command Default
LI feature is enabled by default only if the LI package is installed.
Command Modes
Global configuration
Command History
Release |
Modification |
---|---|
Release 3.8.0 |
This command is introduced. |
Release 4.3.2 |
By default, Lawful Intercept (LI) is not a part of the Cisco IOS XR software. The LI package needs to be installed separately by activating the hfr-li-px.pie. So this command is available only after installing and activating the hfr-li-px.pie. |
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
If you disable lawful intercept, all Mediation Devices and associated TAPs are deleted.
To enable this command, you must install and activate the .
Task ID
Task ID |
Operations |
---|---|
li |
read, write |
Examples
This example shows how to configure the lawful-intercept disable command:
RP/0/RP0/CPU0:router(config)# lawful-intercept disable