crypto fips-mode
To configure FIPS, use the crypto fips-mode command in the global configuration mode. To remove FIPS configuration, use the no form of this command.
crypto fips-mode
no crypto fips-mode
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
Global configuration
Command History
Release | Modification |
---|---|
Release 4.3.1 |
This command was introduced. |
Usage Guidelines
Install and activate the hfr-k9sec-px.pie file before using this command.
To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
Note |
For the configuration to take effect, reload the router by using the reload command in the admin mode. |
Task ID
Task ID | Operation |
---|---|
crypto |
read, write |
Examples
This example shows how to configure FIPS:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# crypto fips-mode