Interface and Hardware Component Command Reference for Cisco CRS Routers, IOS XR Release 6.2.x
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- February 10, 2022
Book Table of Contents
- Preface
- ATM Commands
- Dense Wavelength Division Multiplexing Commands
- Ethernet Interface Commands
- Ethernet OAM Commands
- Global Interface Commands
- Internal Ethernet Control Network Commands
- Inter-rack Switch Control Network Commands on the Cisco IOS XR Software
- Link Bundling Commands
- Management Ethernet Interface Commands
- Null Interface Commands
- Packet-over-SONET Interface Commands
- PPP Commands
- SONET Controller Commands
- SRP Commands on the Cisco IOS XR Software
- T3 and E3 Controller Commands on the Cisco IOS XR Software
- Traffic Mirroring Commands
- VLAN Subinterface Commands
- 10-Gigabit Ethernet WAN PHY Controller Commands
- Index
Feedback