What's New in 4.12.x
The table summarizes the new and updated features that are included in this release and tells you where they are documented in the User Guide.
| Features | Description |
|---|---|
|
This feature offers the ability to rotate the PSK on FAR and HER to enhance network security. |
|
|
Enhances the security between FND and FAR in the SUDI+PSK based tunnel management. |
|
|
Supports exporting the mesh routing tree information of the parent and child nodes into an Excel file. |
|
|
Support for automated CGMS and/or CA certificate renewal for router. |
|
| Support Mesh Parent for L+G Endpoints |
FND displays the mesh parent value as 1 for L+G endpoints. |
|
IP address management is supported for all interfaces. You can define multiple subnets and allocate the IP addresses from those subnets to the interfaces in IoT FND. This removes the dependency of relying on a third-party DHCP server. |
|
|
Allows to perform firmware image upgrade on IR1800 and IR8100 devices from versions 17.13.01 and above. During bootstrapping, you can enter a different image if the installed image at manufacturing is inappropriate. For PNP skip updates, define the firmware versions separated by commas in the pnp-skip-update-ios-xe-fw-versions property in cgms.properties. |
|
|
Periodic metric and configuration push for report interval are supported in the phase 2 of CSMP. |
Feedback