Cisco C8400 Series Secure Routers Configuration Guide

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: August 20, 2020

Chapter: Software Upgrade Processes

Software Upgrade Processes

Software Upgrade Processes

If you want to upgrade the ROMMON and IOS at the same time, perform the steps given below:

Copy the XE image to the router and configure the boot system to point to the new image.
Copy the ROMMON package to the router and perform the ROMMON upgrade.
Reload the router and verify that it boots to the IOS prompt on the new XE image.
Verify that the new ROMMON image was successfully installed using a show platform.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)