BNG Features Added or Modified in IOS XR Release 6.6.x
For details of commands referred in this guide, see the Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference.
Feature |
Description |
Changed in Release |
Where Documented |
---|---|---|---|
Subscriber Redundancy Group for PWHE BNG Sessions |
This feature was introduced |
Release 6.6.3 |
Subscriber Redundancy Group for Pseudowire Headend Subscribers For commands related to this feature, see the Subscriber and Session Redundancy Commands chapter. |
Header Enrichment on PWHE over Sub-interface with SRG Switchover in Global |
Header Enrichment feature was enhanced. |
Release 6.6.3 |
|
HTTP Redirect on PWHE with SRG |
HTTP redirect feature was enhanced. |
Release 6.6.3 |
|
Cisco IOS XR 64-bit BNG Support on RSP5 |
This feature was introduced |
Release 6.6.3 |
|
Support to add options in DHCPv4 and DHCPv6 messages for BNG subscribers |
This functionality was introduced |
Release 6.6.2 |
Send DHCP Options to RADIUS and Send Rich DHCP Options from RADIUS to DHCP Server or Proxy See the BNG DHCP Commands chapter in the Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, for information on the commands related to this feature. |
Support to configure DHCPv6 base profile |
This functionality was introduced |
Release 6.6.2 |
PPP/IPoE Class-based DHCPv6 Mode Selection See the BNG DHCP Commands chapter in Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, for information on the commands related to this feature. |
Support to configure DHCPv4 base profile |
This functionality was introduced |
Release 6.6.2 |
IPoE Class-based DHCPv4 Mode Selection See the BNG DHCP Commands chapter in Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, for information on the commands related to this feature. |
Support for merge and accounting-statistics for configuring Parameterized QoS as auto-service |
This functionality was introduced |
Release 6.6.2 | |
Support for DHCPv4 and DHCPv6 Options from Radius Server to DHCP Client |
This functionality was introduced |
Release 6.6.2 | |
Support for DHCPv4 and DHCPv6 to Handle VRF Name and IP Address from Radius Server |
This functionality was introduced |
Release 6.6.2 |