Troubleshooting Guide for Cisco Catalyst 8000V Edge Software

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Troubleshooting Guide for Cisco Catalyst 8000V Edge Software

Chapter Title

Troubleshooting Packet Drops

Results

Updated:
April 22, 2022

Chapter: Troubleshooting Packet Drops

Troubleshooting Packet Drops

Information About Troubleshooting Packet Drops

This chapter provides information on how to troubleshoot issues related to packet drops on Cisco Catalyst 8000V instances. From Cisco IOS XE 17.8.1, you can run the show drops command to troubleshoot the root cause of packet drops.

With the show drop command, you can identify:

  • The reason for packet drop.

  • The dropped interface with Rx or Tx direction.

  • The root cause of the drop based on the feature or the protocol. You can filter the packet drop based on the interface, protocol, or feature.

Viewing Packet Drop Information

Perform the following steps to view and filter the packet drop information for your instance based on the interface, protocol, or feature.

SUMMARY STEPS

  1. enable
  2. show drops
  3. Show drops {bqs| crypto| firewall| interface| ip-all| nat| punt| qfp| qos}

DETAILED STEPS

  Command or Action Purpose
Step 1

enable

Example:

Router> enable

Enables the privileged EXEC mode. Enter your password, if prompted.
Step 2

show drops

Example:

Router# show drops

Displays the drop statistics for the instance.
Step 3

Show drops {bqs| crypto| firewall| interface| ip-all| nat| punt| qfp| qos}

Example:

Router# show drops qfp

Displays the drop statistics and the summary for the interface or the protocol that you choose.

Troubleshooting Packet Drops: Sample Output

The following is a sample output of the show drops command. This sample output displays the packet drops information related to the Quantum Flow Processor (QFP). 

Router#show drops ?
  bqs        BQS related drops
  crypto     IPSEC related drops
  firewall   Firewall related drops
  interface  Interface drop statistics
  ip-all     IP related drops
  nat        NAT related drops
  punt       Punt path related drops
  qfp        QFP drop statistics
  qos        QoS related drops
  |          Output modifiers
  <cr>       <cr>

Router# show drops qfp
------------------ show platform hardware qfp active statistics drop detail ------------------

Last clearing of QFP drops statistics : Fri Feb 18 08:02:37 2022
 (6d 23h 54m 29s ago)
--------------------------------------------------------------------------------
   ID  Global Drop Stats                         Packets                  Octets  
--------------------------------------------------------------------------------
  319  BFDoffload                                      9                    1350  
   61  Icmp                                           84                    3780  
   53  IpFragErr                                   32136                48718168  
  244  IpLispHashLkupFailed                            3                     213  
   56  IpsecInput                                     18                    4654  
   23  TailDrop                                 26713208             10952799454  
  216  UnconfiguredIpv6Fia                        241788                26596680  
  
------------------ show platform hardware qfp active interface all statistics drop_summary ------------------

----------------------------------------------------------------
Drop Stats Summary:
note: 1) these drop stats are only updated when PAL
         reads the interface stats.
      2) the interface stats include the subinterface

Interface                                       Rx Pkts             Tx Pkts
---------------------------------------------------------------------------
GigabitEthernet1                                  60547                   0
GigabitEthernet2                                  60782            27769658
GigabitEthernet3                                  60581                   0
GigabitEthernet4                                  60502             1323990
Tunnel14095001                                        0             1990214
Tunnel14095002                                        0             3883238
Tunnel14095003                                        0             3879243
Tunnel14095004                                        0             2018866
Tunnel14095005                                        0             3875972
Tunnel14095006                                        0             3991497
Tunnel14095007                                        0             4107743
Tunnel14095008                                        0             3990601

Was this Document Helpful?

FeedbackFeedback

Contact Cisco