Viewing Overlay Details

You can view details about the network at the tenant, device, VM, and baremetal levels. The following sections provide details:

Viewing Tenant Details

To view details at tenant level:

    Step 1   Go to Network Details > Overlay Details. The Overlay Details window appears.
    Step 2   Select the tenant from the Select Tenant drop down list.

    By default, the network details are displayed.

    • Network Name

    • Status

    • Admin State

    • Subnet- Click the I icon to get details about the subnets.

    • Network Type

    • External Network

    • VNI

    Router Details

    The router tab provides details about the routers in the network.

      Step 1   Go to Network Details > Overlay Details. The Overlay Details window appears.
      Step 2   Click the Router tab. The following details are displayed:

      • Router Name

      • Status

      • Connected Networks

      • VNI

      • VRF

      • UUID

      For details about adding a router, see Creating Router using VTS GUI

      VM Details

      The router tab provides details about the routers in the network.

        Step 1   Go to Network Details > Overlay Details. The Overlay Details window appears.
        Step 2   Click the VM tab. The following details are displayed:

        • VM Name

        • IP Address

        • Status

        • Admin State

        • MAC Address

        • Network Name

        • Host IP- click the I icon for information about the host.

        • VLAN

        • UUID

        Baremetal Details

        The baremetal tab provide details about the baremetal server.

          Step 1   Go to Network Details > Overlay Details. The Overlay Details window appears.
          Step 2   Click the Baremetal tab. The following details are displayed:

          • UUID

          • Name

          • Port Name

          • Tagging

          • Admin State

          • Status

          • Network Name

          • IP Address

          • Binding Host

          • VLAN Number

          Viewing Device Details

          To view details at device level:

            Step 1   Go to Network Details > Overlay Details. The Overlay Details window appears.
            Step 2   Select the Device tab.
            The following details are displayed:
            • Device Name - Click the I icon to get the device overview. It displays the following information:

              • Ports

              • Host IP

              • Admin status

              • Oper Status

              • vPC Enabled

              • Number of VMs - Click on the I icon to get more details on the VM.

            • Device IP

            • Auth Group

            • Device Type

            • VLANs - Click the I icon to view the VLAN information.

            • L3 VNI - Click the I icon to view VNI information.

            Viewing VM Details

            To view details at tenant level:

              Step 1   Go to Network Details > Overlay Details. The Overlay Details window appears.
              Step 2   Select the VM tab.
              The following details are displayed:

              • VM Name

              • IP Address

              • Status

              • Admin State

              • MAC Address

              • Network Name

              • Host IP - Click the I icon for host details.

              • VLAN

              • UUID

              Viewing Baremetal Details

              To view baremetal server details:

                Step 1   Go to Network Details > Overlay Details. The Overlay Details window appears.
                Step 2   Click the Baremetal tab. The following details are displayed:

                • UUID

                • Name

                • Port Name

                • Tagging

                • Admin State

                • Network Name

                • IP Address

                • Binding Host

                • VLAN Number

                • Tenant Name

                Managing Tenants

                To add tenants:

                  Step 1   Click Tenant Management. The Tenant Management window appears.
                  It has the following details:

                  • Name

                  • Description

                  Step 2   To add a tenant, click the Add icon. The Tenant Management popup appears.
                  Step 3   Enter the name and description, and click OK.