Preparing for the Installation

This section includes the following topics:

Information Required for Configuration and Installation

Before installation, collect the following information:
Required Information Your Information/Notes

For Preinstallation Configuration

ISO or OVA image location

ISO or OVA image name

Network / Port Profile for VM management 1

VM name

VMware datastore Location

For Prime Network Services Controller Installation

IP address

Subnet mask

Hostname

Domain name

Gateway IP address

DNS server IP address

NTP server IP address

Admin password

Shared secret password for communication between Prime Network Services Controller and managed VMs. (See Shared Secret Password Criteria.)

1 The management port profile is the same port profile that is used for Cisco Virtual Supervisor Module (VSM). The port profile is configured in VSM and used for the Prime Network Services Controller management interface.

Shared Secret Password Criteria

A shared secret password is a password that is known to only those using a secure communication channel. Passwords are designated as strong if they cannot be easily guessed for unauthorized access. When you set a shared secret password for communications between , VSG, and VSM, adhere to the following criteria for setting valid, strong passwords:

  • Do not include special characters or spaces.

  • Make sure your password contains the characteristics of strong passwords and avoids the characteristics of weak passwords as described in the following table:

Strong Passwords

Weak Passwords

  • At least eight characters.

  • Contain characters from at least three of the following classes: lowercase letters, uppercase letters, and numbers.

  • Consecutive alphanumeric characters, such as abcd or 123.

  • Characters repeated three or more times, such as aaabbb.

  • A variation of the word Cisco, such as cisco, ocsic, or one that changes the capitalization of letters in the word Cisco.

  • The username or the username in reverse.

  • A permutation of characters present in the username or Cisco.

Examples of strong passwords are:

  • If2CoM18

  • 2004AsdfLkj30

  • Cb1955S21

  • Es1955Ap

Configuring Chrome for Use with Prime Network Services Controller

To use Chrome with Prime Network Services Controller, you must disable the Adobe Flash Player plugins that are installed by default with Chrome.


Note

Because Chrome automatically enables Adobe Flash Player plugins each time the system reboots, you must perform this procedure each time your client machine reboots.

SUMMARY STEPS

  1. In the Chrome URL field, enter chrome://plugins.
  2. Click Details to expand all the files associated with each plugin.
  3. Locate the Adobe Flash Player plugins, and disable each one.
  4. Download and install Adobe Flash Player plugin version 11.9 or higher.
  5. Close and reopen Chrome before logging in to Prime Network Services Controller.

DETAILED STEPS

Step 1

In the Chrome URL field, enter chrome://plugins.

Step 2

Click Details to expand all the files associated with each plugin.

Step 3

Locate the Adobe Flash Player plugins, and disable each one.

Step 4

Download and install Adobe Flash Player plugin version 11.9 or higher.

Step 5

Close and reopen Chrome before logging in to Prime Network Services Controller.