EVPN Configuration Guide for Cisco 8000 Series Routers, IOS XR Release 25.1.x, 25.2.x,

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: June 1, 2025

New and Changed EVPN Features

This table summarizes the new and changed feature information for the EVPN Configuration Guide for Cisco 8000 Series Routers, and tells you where they are documented.

New and Changed EVPN Features

Table 1. EVPN Features Added or Modified in IOS XR Release 25.x.x
Feature	Description	Changed in Release	Where Documented
Decoupled mode for L2VPN and EVPN VPWS services	This feature was introduced.	Release 25.2.1	Decoupled mode for L2VPN and EVPN VPWS services
EVPN bridging and E-Line services over BGP-LU underlay with SR	This feature was introduced.	Release 25.2.1	EVPN Bridging and E-Line Services over BGP-LU Underlay
EVPN and L3VPN using Route Type-5 over BGP-LU with SR	This feature was introduced.	Release 25.2.1	EVPN and L3VPN using Route Type-5 over BGP-LU with SR
Layer 2 fast reroute for E-Line service	This feature was introduced.	Release 25.1.1	Layer 2 fast reroute for E-Line services

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)