Cisco Application Visibility and Control Solution Guide for IOS XE Release 3.8

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: December 23, 2012

Chapter: Appendix - References

References

Revised: February 6, 2013, OL-27969-02

The following table provides additional reference material.


Document	Description
Application Visibility and Control (AVC)	Cisco Application Visibility and Control (AVC) home page (www.cisco.com/go/avc).
Cisco IOS Flexible NetFlow Command Reference	Flexible NetFlow commands.
Getting Started with Configuring NetFlow and NetFlow Data Export	Configuring NetFlow and NetFlow Data Export.
Configuring NetFlow and NetFlow Data Export	Configuring NetFlow network traffic data export.
Applying QoS Features Using the MQC	Defining traffic policy using the Modular Quality of Service CLI (MQC).
Cisco IOS Quality of Service Solutions Configuration Guide	Configuring Cisco QoS.
Classifying Network Traffic Using NBAR in Cisco IOS XE Software	Configuring Cisco NBAR.
NBAR Protocol Pack Library	NBAR protocol library and NBAR2 protocol packs.
Cisco Performance Monitor and Mediatrace QuickStart Guide	Cisco Performance Monitor and Mediatrace.
Cisco Prime Infrastructure	Cisco Prime Infrastructure home page, with links to product documentation.
Cisco IOS Embedded Packet Capture	Cisco IOS Embedded Packet Capture (EPC) documentation.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)