The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This configuration guide contains Cisco IOS features that are supported in many different software release trains and on many different platforms. Some of the features that are included in this configuration guide may not be supported in your Cisco IOS software release train. This configuration guide may contain information that is not specific to a particular platform or release; however, platform differences and feature release information are included in this guide.Some configuration guides contain content that may be superseded by documentation from a later release. For example, new feature content introduced in Release 12.4 or Release 12.2SX could supersede configuration content that is based on Release 12.2. Any Internet Protocol (IP) addresses used in this guide are not intended to be actual addresses. Any examples, configuration sample output, and figures included in this guide are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental. Note: Command information for the Configuring SNMP Support feature may be found in the Network Management Command Reference at the following URL: http://www.cisco.com/en/US/docs/ios/netmgmt/command/reference/nm_book.html.
Browse all support information for Cisco IOS Release 12.2Sr, or select another product.