- Configuring RADIUS
- Framed-Route in RADIUS Accounting
- RFC-2867 RADIUS Tunnel Accounting
- RADIUS Centralized Filter Management
- RADIUS Debug Enhancements
- RADIUS Logical Line ID
- RADIUS Route Download
- RADIUS Server Load Balancing
- RADIUS Support of 56-Bit Acct Session-Id
- RADIUS Tunnel Preference for Load Balancing and Fail-Over
- RADIUS Server Reorder on Failure
- RADIUS Interim Update at Call Connect
- RADIUS EAP Support
RADIUS Interim Update at Call Connect
The RADIUS Interim Update at Call Connect feature generates an additional accounting record that provides the call connection timestamp for the billing server.
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the Feature Information Table at the end of this document.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Information About RADIUS Interim Update at Call Connect
When the RADIUS Interim Update at Call Connect feature enabled, Cisco IOS software generates and sends an additional updated interim accounting record to the accounting server when a call leg is connected. A call leg is a distinct segment of a call connection in a voice over IP (VOIP) network that is a logical connection between the router and either a telephony endpoint over a bearer channel, or another endpoint using a session protocol. All attributes (for example, h323-connect-time and backward-call-indicators) available at the time of call connection are sent through this interim updated accounting record.
How to Enable RADIUS Interim Update at Call Connect Feature
Perform the following task to enable the Cisco IOS to generate and send an additional updated interim accounting record to the accounting server when a call leg is connected.
DETAILED STEPS
Additional References
The following sections provide references related to the RADIUS Interim Update at Call Connect feature.
Related Documents
| Related Topic |
Document Title |
|---|---|
| Authentication, Authorization, and Accounting (AAA) |
Configuring Authentication , Configuring Authorization , and Configuring Accounting modules. |
| RADIUS Vendor-Specific Attributes |
RADIUS Vendor-Proprietary Attributes module. |
| Configuring Dynamic Prompts, Customizing Accounting Templates, and Directing AAA Requests for Voice Gateways |
Cisco IOS Dial Technologies Configuration Guide , Release 12.4T and Cisco IOS VPDN Configuration Guide , Release 12.4T. |
Standards
| Standard |
Title |
|---|---|
| None. |
-- |
MIBs
| MIB |
MIBs Link |
|---|---|
| None. |
To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL: |
RFCs
| RFC |
Title |
|---|---|
| RFC 2138 |
Remote Authentication Dial In User Service (RADIUS) |
| RFC 2139 |
RADIUS Accounting |
Technical Assistance
| Description |
Link |
|---|---|
| The Cisco Support website provides extensive online resources, including documentation and tools for troubleshooting and resolving technical issues with Cisco products and technologies. To receive security and technical information about your products, you can subscribe to various services, such as the Product Alert Tool (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds. Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. |
Feature Information for RADIUS Interim Update at Call Connect
The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
| Table 1 | Feature Information for RADIUS Interim Update at Call Connect |
| Feature Name |
Releases |
Feature Information |
|---|---|---|
| RADIUS Interim Update at Call Connect |
12.2(13)T |
The RADIUS Interim Update at Call Connect feature generates an additional accounting record that provides the call connection timestamp for the billing server. In 12.2(13)T, this feature was introduced on the Cisco 2600 and Cisco 3600 series routers, and on the Cisco 3725, Cisco 3745, Cisco AS5300, Cisco AS5350, Cisco AS5400, Cisco AS5800, and Cisco AS5850.. The following commands were introduced or modified: gw-accounting aaa and aaa accounting update |
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
Feedback