Post Installation
To verify if the TLOC and VRRP configuration is set on the HyperFlex Cluster, do one of the following in vManage:
-
Single WAN Termination DeploymentâVerify if the Transport Location (TLOC) and Virtual Router Redundancy Protocol (VRRP) is set correctly.
-
Dual WAN Termination DeploymentâVerify if the VRRP is set correctly.
Single WAN Termination Deployment
To view the TLOC configuration details, do the following:
-
Log in to vManage in your web browser.
-
Navigate to
. -
Under WAN-Edge, select the vEdge Router.
-
Navigate to
.
Dual WAN Termination Deployment
To view the VRRP configuration details, do the following:
-
Log in to vManage in your web browser.
-
Navigate to
. -
Under WAN-Edge, select the vEdge Router.
-
Select Real Time.
-
From the command drop-down located in the right pane, select VRRP Information.
Verify the Priority, State, and OMP State details.