Cisco HyperFlex Edge Deployment Guide, Release 5.0(x)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: January 5, 2023

Chapter: Expand Cisco HyperFlex System Clusters

Expand Cisco HyperFlex System Clusters
Cluster Expansion Guidelines

Expand Cisco HyperFlex System Clusters

Cluster Expansion Guidelines

Please review these guidelines before expanding your cluster.

Edge Cluster Expansion is supported in Cisco HyperFlex Data Platform Release 4.0(2e) and later. You can expand ESXi based 10/25 GbE HyperFlex Edge clusters with 3 nodes via Intersight.

HyperFlex Edge Cluster expansion is supported only on clusters deployed using Intersight. Edge Cluster expansion using Intersight is not supported for clusters deployed through the HyperFlex OVA Installer.

Note

Cluster expansion is not supported on HyperFlex 2-Node Edge clusters with this feature.

Expansion of Edge Clusters on HyperFlex version 4.0(2d) and earlier is not supported.

Please refer to the Intersight documentation for all requirements: Expand Cisco HyperFlex Clusters in Cisco Intersight.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)