Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 10.3(x)

show fabric-binding database

show fabric-binding database [ { active [ vsan <i0> ] | vsan1 <i1> } ]

Syntax Description


show	Show running system information
fabric-binding	Show Fabric Binding
database	Show Fabric Binding Configured database
active	(Optional) Activated Fabric Bindings
vsan	(Optional) VSAN id
i0	(Optional) VSAN range
vsan1	(Optional) VSAN id
i1	(Optional) VSAN range

Command Mode

/exec

show fabric-binding efmd statistics

show fabric-binding efmd statistics [ vsan <i0> ]

Syntax Description


show	Show running system information
fabric-binding	Show Fabric Binding
efmd	Exchange Fabric Membership Data
statistics	EFMD protocol statistics
vsan	(Optional) VSAN id
i0	(Optional) VSAN range

Command Mode

/exec

show fabric-binding fip

Syntax Description


show	Show running system information
fabric-binding	Fabric Binding configuration
fip	Display the enabled FIP

Command Mode

/exec

show fabric-binding statistics

show fabric-binding statistics [ vsan <i0> ]

Syntax Description


show	Show running system information
fabric-binding	Show Fabric Binding
statistics	Statistics of Fabric Binding
vsan	(Optional) VSAN Id
i0	(Optional) VSAN range

Command Mode

/exec

show fabric-binding status

show fabric-binding status [ vsan <i0> ]

Syntax Description


show	Show running system information
fabric-binding	Show Fabric Binding
status	Fabric binding Status
vsan	(Optional) VSAN Id
i0	(Optional) VSAN range

Command Mode

/exec

show fabric-binding violations

show fabric-binding violations [ last <i0> ]

Syntax Description


show	Show running system information
fabric-binding	Show Fabric Binding
violations	Violations of Fabric Binding policies
last	(Optional) Latest n violations
i0	(Optional) Violation number

Command Mode

/exec

show fabric database dci

show fabric database dci [ { vrf { <vrf-name> | <vrf-known-name> } [ peer-id <peer-ip-address> ] [ detail ] } ] [ __readonly__ [ TABLE_database_dci <vrf_name> <state> <flags> <profile> <instance> ] [ TABLE_database_dci_detail <packet_arrival_time> <sent_to_database_manager_at> <received_parameters_from_database_manager_at> <sent_apply_to_configuration_manager_at> <completed_executing_all_commands_at> <sent_un_apply_to_configuration_manager_at> <completed_unapplying_all_commands_at> ] ]

Syntax Description


show	Show running system information
fabric	Fabric
database	Fabric Database
dci	DCI Profile Database
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
peer-id	(Optional) management ip address of peer
peer-ip-address	(Optional) IP address in CIDR format
detail	(Optional) Show detailed information
__readonly__	(Optional) Read Only
TABLE_database_dci	(Optional) table show fabric database dci
vrf_name	(Optional)
state	(Optional)
flags	(Optional)
profile	(Optional)
instance	(Optional)
TABLE_database_dci_detail	(Optional) detail for table show fabric database dci
packet_arrival_time	(Optional) Profile request time
sent_to_database_manager_at	(Optional) Profile request sent to DCNM
received_parameters_from_database_manager_at	(Optional) Profile downloaded from DCNM
sent_apply_to_configuration_manager_at	(Optional) Profile sent to PPM to apply
completed_executing_all_commands_at	(Optional) Profile applied by PPM
sent_un_apply_to_configuration_manager_at	(Optional) Profile un-apply sent to PPM
completed_unapplying_all_commands_at	(Optional) Profile un-applied by PPM

Command Mode

/exec

show fabric database host

show fabric database host [ detail ] [ { vni <vni-id> } | { dot1q <vlan-id> } ] [ __readonly__ [ TABLE_database_host [ <trigger_source> ] [ <client_type> ] [ <got_trigger_at> ] [ <number_of_client_hosts> ] [ <number_of_associated_interfaces> ] [ <profile_be_un_applied_in_seconds> ] [ <new_vdp_requests_be_accepted_in_seconds> ] [ <recovered_profile_be_checked_for_validity_in_seconds> ] [ <mac_aging_checked_in_seconds> ] [ <sent_to_database_manager_at> ] [ <received_parameters_from_database_manager_at> ] [ <displaying_parameters_for_profile> ] [ <displaying_parameters_for_instance> ] [ <no_parameters_for_the_profile> ] [ <displaying_re_written_parameters_for_vpc_role> ] [ TABLE_parameter [ <parameter_index> ] [ <parameter> ] ] [ TABLE_static_profile <profile> <instance> <no_parameters_for_the_profile> ] [ TABLE_migrated_profile <profile> <instance_index> <previous_profile> <previous_instance_index> ] [ TABLE_rollback_profile <profile> <instance_index> ] [ <got_vlan_allocated_from_vlan_manager_at> ] [ <sent_apply_to_configuration_manager_at> ] [ <completed_executing_all_commands_at> ] [ <sent_to_vpc_peer_at> ] [ <completed_executing_all_commands_on_vpc_peer_at> ] [ <sent_un_apply_to_configuration_manager_at> ] [ <completed_unapplying_all_commands_at> ] ] [ TABLE_database_host_vni { [ <vni_id> ] [ <vlan_id> ] [ <state> <flag> <profile_name> <instance_name> ] [ <packet_arrival_time> <request_profile_time> <got_profile_time> <sent_to_PPM_time> <profile_apply_time> <del_to_PPM_time> ] [ { TABLE_database_host_detail <interface> <encap> <flags> <state> [ <vsi_id> ] [ <client> ] [ <host> ] } ] } ] [ TABLE_database_host_vlan { [ <vlan_id> ] [ <vni_id> ] [ <state> <flag> <profile_name> <instance_name> ] [ <packet_arrival_time> <request_profile_time> <got_profile_time> <sent_to_PPM_time> <profile_apply_time> <del_to_PPM_time> ] [ { TABLE_database_host_detail <interface> <encap> <flags> <state> [ <vsi_id> ] } ] } ] [ TABLE_extranet_vrf_entries { <vrf> <l3_vni> <state> <profile> <instance> } ] ]

Syntax Description


show	Show running system information
fabric	Fabric
database	Fabric Database
host	Host to profile mapping
detail	(Optional) Show hosts and interfaces
vni	(Optional) Virtual Network Identifier
vni-id	(Optional)
dot1q	(Optional) Dot1Q Encapsulation
vlan-id	(Optional)
__readonly__	(Optional) Read Only
TABLE_database_host	(Optional) table show fabric database host {dot1q \| vni}
trigger_source	(Optional) TODO
client_type	(Optional) TODO
got_trigger_at	(Optional) TODO
number_of_client_hosts	(Optional) TODO
number_of_associated_interfaces	(Optional) TODO
profile_be_un_applied_in_seconds	(Optional) TODO
new_vdp_requests_be_accepted_in_seconds	(Optional) TODO
recovered_profile_be_checked_for_validity_in_seconds	(Optional) TODO
mac_aging_checked_in_seconds	(Optional) TODO
sent_to_database_manager_at	(Optional) TODO
received_parameters_from_database_manager_at	(Optional) TODO
displaying_parameters_for_profile	(Optional) TODO
displaying_parameters_for_instance	(Optional) TODO
no_parameters_for_the_profile	(Optional) TODO
displaying_re_written_parameters_for_vpc_role	(Optional) TODO
TABLE_parameter	(Optional) table show the parameters
parameter_index	(Optional) TODO
parameter	(Optional) TODO
TABLE_static_profile	(Optional) show static profile
profile	(Optional) TODO
instance	(Optional) TODO
no_parameters_for_the_profile	(Optional) TODO
TABLE_migrated_profile	(Optional) show migrated profile
profile	(Optional) TODO
instance_index	(Optional) TODO
previous_profile	(Optional) TODO
previous_instance_index	(Optional) TODO
TABLE_rollback_profile	(Optional) show rollback profile
profile	(Optional) TODO
instance_index	(Optional) TODO
got_vlan_allocated_from_vlan_manager_at	(Optional) TODO
sent_apply_to_configuration_manager_at	(Optional) TODO
completed_executing_all_commands_at	(Optional) TODO
sent_to_vpc_peer_at	(Optional) TODO
completed_executing_all_commands_on_vpc_peer_at	(Optional) TODO
sent_un_apply_to_configuration_manager_at	(Optional) TODO
completed_unapplying_all_commands_at	(Optional) TODO
TABLE_database_host_vni	(Optional) table show fabric database host vni based
vni_id	(Optional) TODO Add comment
vlan_id	(Optional) TODO Add comment
state	(Optional) TODO Add comment
flag	(Optional) TODO
profile_name	(Optional) TODO
instance_name	(Optional) TODO
packet_arrival_time	(Optional) TODO
request_profile_time	(Optional) TODO
got_profile_time	(Optional) TODO
sent_to_PPM_time	(Optional) TODO
profile_apply_time	(Optional) TODO
del_to_PPM_time	(Optional) TODO
TABLE_database_host_detail	(Optional) table show fabric database host detail
interface	(Optional) TODO
encap	(Optional) TODO
flags	(Optional) TODO
state	(Optional) TODO
vsi_id	(Optional) TODO
client	(Optional) TODO
host	(Optional) TODO
TABLE_database_host_vlan	(Optional) table show fabric database host vlan based
vlan_id	(Optional) TODO Add comment
vni_id	(Optional) TODO Add comment
state	(Optional) TODO Add comment
flag	(Optional) TODO
profile_name	(Optional) TODO
instance_name	(Optional) TODO
packet_arrival_time	(Optional) TODO
request_profile_time	(Optional) TODO
got_profile_time	(Optional) TODO
sent_to_PPM_time	(Optional) TODO
profile_apply_time	(Optional) TODO
del_to_PPM_time	(Optional) TODO
TABLE_database_host_detail	(Optional) table show fabric database host detail
interface	(Optional) TODO
encap	(Optional) TODO
flags	(Optional) TODO
state	(Optional) TODO
vsi_id	(Optional) TODO
TABLE_extranet_vrf_entries	(Optional) table extranet VRF entries
vrf	(Optional) TODO
l3_vni	(Optional) TODO
state	(Optional) TODO
profile	(Optional) TODO
instance	(Optional) TODO

Command Mode

/exec

show fabric database host statistics

show fabric database host statistics [ __readonly__ [ TABLE_database_host_statistics { [ <data_snoop_triggers> ] [ <data_snoop_deletes> ] [ <data_snoop_responses> ] [ <vdp_association_requests> ] [ <vdp_deassociation_requests> ] [ <vdp_association_responses> ] [ <vdp_error_responses> ] [ <unsupported_interfaces> ] [ <no_profile_map_errors> ] [ <outstanding_delete_retry_add> ] [ <duplicate_add_existing_host> ] [ <hmm_api_error_cannot_add_host> ] [ <existing_profile_new_host> ] [ <profile_apply_from_vpc_peer> ] [ <profile_un_apply_from_vpc_peer> ] [ <host_apply_from_vpc_peer> ] [ <host_un_apply_from_vpc_peer> ] [ <early_delete_cancel_add> ] [ <dhcp_requests> ] [ <dhcp_responses> ] [ <dhcp_error_responses> ] [ <adbm_requests> ] [ <adbm_responses> ] [ <adbm_error_responses> ] [ <adbm_error_requests> ] [ <adbm_db_notifications> ] [ <vnseg_no_bridge_domain> ] [ <vnseg_encap_responses> ] [ <vnseg_vni_responses> ] [ <vnseg_unknown_responses> ] [ <vnseg_bd_down_notif> ] [ <bd_mgr_requests> ] [ <bd_mgr_success_responses> ] [ <bd_mgr_failure_responses> ] [ <bd_mgr_unreserve> ] [ <bd_mgr_inconsistencies> ] [ <no_mac_on_bd_notif> ] [ <refresh_failures> ] [ <profile_apply_received> ] [ <profile_vpc_queued> ] [ <profile_local_apply_queued> ] [ <profile_local_unapply_queued> ] [ <profile_apply_sent> ] [ <profile_apply_responses> ] [ <profile_apply_success> ] [ <profile_unapply_success> ] [ <profile_apply_failure> ] [ <profile_commands> ] [ <profile_error_incomplete_configs> ] [ <profile_api_error> ] [ <profile_unapply_sent> ] [ <profile_top_queue_adds> ] [ <profile_high_queue_adds> ] [ <profile_low_queue_adds> ] [ <profile_unapply_failure> ] [ <outstanding_vlan_requests> ] [ <outstanding_adbm_requests> ] [ <outstanding_profile_applies> ] [ <outstanding_vpc_profile_applies> ] [ <node_recon_pending> ] [ <node_recon_attempts> ] [ <node_recon_failures> ] } ] ]

Syntax Description


show	Show running system information
fabric	Fabric
database	Fabric Database
host	Auto-configured Hosts
statistics	Statistics - Mostly shows non-zero values
__readonly__	(Optional) Read Only
TABLE_database_host_statistics	(Optional) table show fabric database host statistics
data_snoop_triggers	(Optional) TODO
data_snoop_deletes	(Optional) TODO
data_snoop_responses	(Optional) TODO
vdp_association_requests	(Optional) TODO
vdp_deassociation_requests	(Optional) TODO
vdp_association_responses	(Optional) TODO
vdp_error_responses	(Optional) TODO
unsupported_interfaces	(Optional) TODO
no_profile_map_errors	(Optional) TODO
outstanding_delete_retry_add	(Optional) TODO
duplicate_add_existing_host	(Optional) TODO
hmm_api_error_cannot_add_host	(Optional) TODO
existing_profile_new_host	(Optional) TODO
profile_apply_from_vpc_peer	(Optional) TODO
profile_un_apply_from_vpc_peer	(Optional) TODO
host_apply_from_vpc_peer	(Optional) TODO
host_un_apply_from_vpc_peer	(Optional) TODO
early_delete_cancel_add	(Optional) TODO
dhcp_requests	(Optional) TODO
dhcp_responses	(Optional) TODO
dhcp_error_responses	(Optional) TODO
adbm_requests	(Optional) TODO
adbm_responses	(Optional) TODO
adbm_error_responses	(Optional) TODO
adbm_error_requests	(Optional) TODO
adbm_db_notifications	(Optional) TODO
vnseg_no_bridge_domain	(Optional) TODO
vnseg_encap_responses	(Optional) TODO
vnseg_vni_responses	(Optional) TODO
vnseg_unknown_responses	(Optional) TODO
vnseg_bd_down_notif	(Optional) TODO
bd_mgr_requests	(Optional) TODO
bd_mgr_success_responses	(Optional) TODO
bd_mgr_failure_responses	(Optional) TODO
bd_mgr_unreserve	(Optional) TODO
bd_mgr_inconsistencies	(Optional) TODO
no_mac_on_bd_notif	(Optional) TODO
refresh_failures	(Optional) TODO
profile_apply_received	(Optional) TODO
profile_vpc_queued	(Optional) TODO
profile_local_apply_queued	(Optional) TODO
profile_local_unapply_queued	(Optional) TODO
profile_apply_sent	(Optional) TODO
profile_apply_responses	(Optional) TODO
profile_apply_success	(Optional) TODO
profile_unapply_success	(Optional) TODO
profile_apply_failure	(Optional) TODO
profile_commands	(Optional) TODO
profile_error_incomplete_configs	(Optional) TODO
profile_api_error	(Optional) TODO
profile_unapply_sent	(Optional) TODO
profile_top_queue_adds	(Optional) TODO
profile_high_queue_adds	(Optional) TODO
profile_low_queue_adds	(Optional) TODO
profile_unapply_failure	(Optional) TODO
outstanding_vlan_requests	(Optional) TODO
outstanding_adbm_requests	(Optional) TODO
outstanding_profile_applies	(Optional) TODO
outstanding_vpc_profile_applies	(Optional) TODO
node_recon_pending	(Optional) TODO
node_recon_attempts	(Optional) TODO
node_recon_failures	(Optional) TODO

Command Mode

/exec

show fabric database host summary

show fabric database host summary [ __readonly__ [ TABLE_database_host_summary { <number_of_instances_applied> <number_of_client_hosts> <recovery_timeout_minute> <cleanup_timeout_minute> <client_add_suppression_timeout_minute> <mac_aging_timeout_minute> <autoid_support> } ] ]

Syntax Description


show	Show running system information
fabric	Fabric
database	Fabric Database
host	Auto-configured Hosts
summary	Summary
__readonly__	(Optional) Read Only
TABLE_database_host_summary	(Optional) table show fabric database host summary
number_of_instances_applied	(Optional) TODO
number_of_client_hosts	(Optional) TODO
recovery_timeout_minute	(Optional) TODO
cleanup_timeout_minute	(Optional) TODO
client_add_suppression_timeout_minute	(Optional) TODO
mac_aging_timeout_minute	(Optional) TODO
autoid_support	(Optional) List of supported auto-generate ids

Command Mode

/exec

show fabric database profile-map

show fabric database profile-map { global | [ <id> | interface <interface-id> ] } [ __readonly__ [ TABLE_database_profile_map { <map> <proto> <vni> <dot1q> <flags> <profile_name> } ] ]

Syntax Description


show	Show running system information
fabric	Fabric
database	Fabric Database
profile-map	Profile Map
global	Global profile (apply to all interfaces)
id	(Optional) Profile Map ID
interface	(Optional) Specified interface to display
interface-id	(Optional) Name of interface
__readonly__	(Optional) Read Only
TABLE_database_profile_map	(Optional) table show fabric database profile-map
map	(Optional) TODO
proto	(Optional) TODO
vni	(Optional) TODO
dot1q	(Optional) TODO
flags	(Optional) TODO
profile_name	(Optional) TODO

Command Mode

/exec

show fabric database static-host

show fabric database static-host [ __readonly__ { TABLE_database_static_host <host_key> <interface> <state> <retry_delay> <retry_attempts> } ]

Syntax Description


show	Show running system information
fabric	Fabric
database	Fabric Database
static-host	Configured Static Hosts
__readonly__	(Optional) Read Only
TABLE_database_static_host	(Optional) table show fabric database static-host
host_key	(Optional) static-host key
interface	(Optional) interface name
state	(Optional) static-host state
retry_delay	(Optional) seconds until next retry
retry_attempts	(Optional) cumulative retry attempts

Command Mode

/exec

show fabric database statistics

show fabric database statistics [ type { network | profile | cabling | partition | bl-dci | host } ] [ __readonly__ { TABLE_types <dbtype> <requests> <dispatched> <not_dispatched> <re_dispatched> } [ { TABLE_dbs <is_active> <type> <prot> <serverdb> [ <reqs> <ok> <nores> <err> <tmout> <pend> ] } ] { LastPollTime <poll_time> } { LastUpdateTime <update_time> } [ { TABLE_updates <update_type> <update_status> } ] ]

Syntax Description


show	Show running system information
fabric	Fabric
database	Show Fabric Database
statistics	Show database statistics
type	(Optional) Enter database type
network	(Optional) Network Database
profile	(Optional) Port or Switch Profile Database
cabling	(Optional) Cable Management Database
partition	(Optional) Partition Database
bl-dci	(Optional) Border Leaf - DCI
host	(Optional) Host
__readonly__	(Optional)
TABLE_types	(Optional) totals by type
dbtype	(Optional) type of database
requests	(Optional) number of requests
dispatched	(Optional) number dispatched
not_dispatched	(Optional) number not dispatched
re_dispatched	(Optional) number re-dispatched
TABLE_dbs	(Optional) per-database stats
is_active	(Optional) active/inactive
type	(Optional) database type
prot	(Optional) database protocol
serverdb	(Optional) server database
reqs	(Optional) requests
ok	(Optional) OK
nores	(Optional) nores
err	(Optional) err
tmout	(Optional) tmout
pend	(Optional) pend
LastPollTime	(Optional) last poll time
poll_time	(Optional) poll time
LastUpdateTime	(Optional) last update time for db status change
update_time	(Optional) update time
TABLE_updates	(Optional) totals ty type
update_type	(Optional) db type
update_status	(Optional) db status

Command Mode

/exec

show fabric forwarding host-db

show fabric forwarding host-db [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ __readonly__ [ TABLE_forwarding_host_db_vrf { <vrf> <vrf_id> <vrf_state> <vrf_reason> <vni_id> <refcount> <conversational_learning> [ TABLE_limit_type <limit_type> <enable> <threshold> <action> ] [ TABLE_ipv4 <address_family> <vrf> <table_id> <table_state> <refcount> <local_hosts> <remote_hosts> <aggregates> [ TABLE_aggregate_list <aggregate_subnet_prefix_list> <aggregate_subnet_prefix_state> ] ] [ TABLE_ipv6 <address_family> <vrf> <table_id> <table_state> <refcount> <local_hosts> <remote_hosts> <aggregates> [ TABLE_aggregate_list <aggregate_subnet_prefix_list> <aggregate_subnet_prefix_state> ] ] } ] ]

Syntax Description


show	Show running system information
fabric	Fabric
forwarding	Fabric Forwarding Protocol: Host Mobility Manager (HMM)
host-db	Host Database info
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
__readonly__	(Optional) Read Only
TABLE_forwarding_host_db_vrf	(Optional) table show fabric forwarding host-db vrf
vrf	(Optional) TODO
vrf_id	(Optional) TODO
vrf_state	(Optional) TODO
vrf_reason	(Optional) TODO
vni_id	(Optional) TODO
refcount	(Optional) TODO
conversational_learning	(Optional) TODO
TABLE_limit_type	(Optional) table for limit type
limit_type	(Optional) TODO
enable	(Optional) TODO
threshold	(Optional) TODO
action	(Optional) TODO
TABLE_ipv4	(Optional) Information for address family IPv4
address_family	(Optional) TODO
vrf	(Optional) TODO
table_id	(Optional) TODO
table_state	(Optional) TODO
refcount	(Optional) TODO
local_hosts	(Optional) TODO
remote_hosts	(Optional) TODO
aggregates	(Optional) TODO
TABLE_aggregate_list	(Optional) table for aggregate subnet prefix list
aggregate_subnet_prefix_list	(Optional) TODO
TABLE_ipv6	(Optional) Information for address family IPv6
address_family	(Optional) TODO
vrf	(Optional) TODO
table_id	(Optional) TODO
table_state	(Optional) TODO
refcount	(Optional) TODO
local_hosts	(Optional) TODO
remote_hosts	(Optional) TODO
aggregates	(Optional) TODO
TABLE_aggregate_list	(Optional) table for aggregate subnet prefix list
aggregate_subnet_prefix_list	(Optional) TODO
aggregate_subnet_prefix_state	(Optional) TODO

Command Mode

/exec

show fabric forwarding ip local

show fabric forwarding ip { local-host-db [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ <ip-prefix> ] } [ __readonly__ [ TABLE_forwarding_ip_local_host_db_vrf { <hmm_host> <vrf> <status_in> { TABLE_hosts <host> <mac_address> <svi> <flags_0x> <physical_interface> <status> } } ] ]

Syntax Description


show	Show running system information
fabric	Fabric
forwarding	Fabric Forwarding Protocol: Host Mobility Manager (HMM)
ip	Display IP information
local-host-db	HMM Local Host Database
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
ip-prefix	(Optional) IP prefix in CIDR format
__readonly__	(Optional) Read Only
TABLE_forwarding_ip_local_host_db_vrf	(Optional) table show fabric forwarding ip local-host-db vrf
hmm_host	(Optional) TODO
vrf	(Optional) TODO
status_in	(Optional) TODO
TABLE_hosts	(Optional) table show information for each hosts
host	(Optional) TODO
mac_address	(Optional) TODO
svi	(Optional) TODO
flags_0x	(Optional) TODO
physical_interface	(Optional) TODO
status	(Optional) *-valid, x-deleted, a-aged out, c-cleaned

Command Mode

/exec

show fabric forwarding ipv6 local

show fabric forwarding ipv6 { local-host-db [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ <ipv6-prefix> ] } [ __readonly__ [ TABLE_forwarding_ipv6_local_host_db_vrf { <hmm_host> <vrf> <status_in> { TABLE_hosts <host> <mac_address> <svi> <flags_0x> <physical_interface> <status> } } ] ]

Syntax Description


show	Show running system information
fabric	Fabric
forwarding	Fabric Forwarding Protocol: Host Mobility Manager (HMM)
ipv6	Display IPv6 information
local-host-db	HMM Local Host Database
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
__readonly__	(Optional) Read Only
TABLE_forwarding_ipv6_local_host_db_vrf	(Optional) table show fabric forwarding ipv6 local-host-db vrf
hmm_host	(Optional) TODO
vrf	(Optional) TODO
status_in	(Optional) TODO
TABLE_hosts	(Optional) table show information for each hosts
host	(Optional) TODO
mac_address	(Optional) TODO
svi	(Optional) TODO
flags_0x	(Optional) TODO
physical_interface	(Optional) TODO
status	(Optional) *-valid, x-deleted, a-aged out, c-cleaned

Command Mode

/exec

show fabric multicast globals

show fabric multicast globals [ __readonly__ [ <pruning> ] [ <switch_role> ] [ <fabric_control_seg> ] [ <peer_fabric_ctrl_addr> ] [ <advertise_vpc_rpf_routes> ] [ <created_vni_list> ] [ <fwd_encap> ] [ <mrib_sync_delay> ] [ <bgp_eor_rcvd> ] [ <bgp_eor_rcvd_ts> ] [ <cli_done_rcvd> ] [ <cli_done_rcvd_ts> ] [ <local_nlri_req> ] [ <dist_dr> ] [ <dist_pending> ] [ <spt_only> ] [ <pim_trm_bl> ] [ <pim6_trm_bl> ] [ <l2_trm_evpn> ] ]

Syntax Description


show	Show running system information
fabric	Fabric
multicast	Multicast information
globals	show the global settings
__readonly__	(Optional)
pruning	(Optional)
switch_role	(Optional)
fabric_control_seg	(Optional)
peer_fabric_ctrl_addr	(Optional)
advertise_vpc_rpf_routes	(Optional)
created_vni_list	(Optional)
fwd_encap	(Optional)
mrib_sync_delay	(Optional)
bgp_eor_rcvd	(Optional)
bgp_eor_rcvd_ts	(Optional)
cli_done_rcvd	(Optional)
cli_done_rcvd_ts	(Optional)
local_nlri_req	(Optional)
dist_dr	(Optional)
dist_pending	(Optional)
spt_only	(Optional)
pim_trm_bl	(Optional)
pim6_trm_bl	(Optional)
l2_trm_evpn	(Optional)

Command Mode

/exec

show fabric multicast ipv4 l2 vni

show fabric multicast { ipv4 | ipv6 } { l2-mroute } vni { <vni-id> | all } [ __readonly__ TABLE_vni <vnid> [ TABLE_mroute <mroute_desc> [ TABLE_fabric <fabric_node_addr> ] ] ]

Syntax Description


show	Show running system information
fabric	Fabric
multicast	Multicast information
ipv4	Display IP information
ipv6	Display IPv6 information
l2-mroute	display l2-mroute status
vni	Virtual Network Identifier
vni-id	VNI number
all	Display all L2 VNI NGMVPN is aware of
__readonly__	(Optional)
TABLE_vni	(Optional)
vnid	(Optional)
TABLE_mroute	(Optional)
mroute_desc	(Optional)
TABLE_fabric	(Optional)
fabric_node_addr	(Optional)

Command Mode

/exec

show fabric multicast statistics

show fabric multicast statistics [ __readonly__ [ <remote_nlri_msgs_rx> ] [ <remote_nlri_msgs_rx_fail> ] [ <local_nlri_msgs_tx> ] [ <local_nlri_msgs_tx_fail> ] [ <import_rt_msgs_tx> ] [ <import_rt_msgs_tx_fail> ] [ <m2rib_msgs_tx> ] [ <m2rib_msgs_tx_fail> ] [ <mrib_msgs_tx> ] [ <mrib_msgs_tx_fail> ] [ <m6rib_msgs_tx> ] [ <m6rib_msgs_tx_fail> ] [ <pim_msgs_tx> ] [ <pim_msgs_tx_fail> ] [ <pim_msgs_rx> ] [ <pim_all_remote_ssm_rp_req_rx> ] [ <pim6_msgs_tx> ] [ <pim6_msgs_tx_fail> ] [ <pim6_msgs_rx> ] [ <pim6_all_remote_ssm_rp_req_rx> ] [ <remote_nlri_ack_tx> ] [ <remote_nlri_ack_tx_fail> ] [ <all_local_nlri_req_rx> ] [ <local_nlri_ack_rx> ] [ <remote_route_req_tx> ] [ <remote_route_req_tx_fail> ] [ <pim6_all_local_ssm_rp_req_tx> ] [ <pim6_all_local_ssm_rp_req_tx_fail> ] [ <igmp_local_route_rx> ] [ <igmp_local_route_ack_rx> ] [ <igmp_msgs_tx> ] [ <igmp_msgs_tx_fail> ] [ <igmp_l2_vni_up_down_rx> ] [ <mts_q_high_warning_rx> ] [ <mts_q_full_warning_rx> ] ]

Syntax Description


show	Show running system information
fabric	Fabric
multicast	Multicast information
statistics	Show statistics
__readonly__	(Optional)
remote_nlri_msgs_rx	(Optional)
remote_nlri_msgs_rx_fail	(Optional)
local_nlri_msgs_tx	(Optional)
local_nlri_msgs_tx_fail	(Optional)
import_rt_msgs_tx	(Optional)
import_rt_msgs_tx_fail	(Optional)
m2rib_msgs_tx	(Optional)
m2rib_msgs_tx_fail	(Optional)
mrib_msgs_tx	(Optional)
mrib_msgs_tx_fail	(Optional)
m6rib_msgs_tx	(Optional)
m6rib_msgs_tx_fail	(Optional)
pim_msgs_tx	(Optional)
pim_msgs_tx_fail	(Optional)
pim_msgs_rx	(Optional)
pim_all_remote_ssm_rp_req_rx	(Optional)
pim6_msgs_tx	(Optional)
pim6_msgs_tx_fail	(Optional)
pim6_msgs_rx	(Optional)
pim6_all_remote_ssm_rp_req_rx	(Optional)
remote_nlri_ack_tx	(Optional)
remote_nlri_ack_tx_fail	(Optional)
all_local_nlri_req_rx	(Optional)
local_nlri_ack_rx	(Optional)
remote_route_req_tx	(Optional)
remote_route_req_tx_fail	(Optional)
pim6_all_local_ssm_rp_req_tx	(Optional)
pim6_all_local_ssm_rp_req_tx_fail	(Optional)
igmp_local_route_rx	(Optional)
igmp_local_route_ack_rx	(Optional)
igmp_msgs_tx	(Optional)
igmp_msgs_tx_fail	(Optional)
igmp_l2_vni_up_down_rx	(Optional)
mts_q_high_warning_rx	(Optional)
mts_q_full_warning_rx	(Optional)

Command Mode

/exec

show fabric multicast vrf

show fabric multicast vrf [ { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <context_name> [ <context_id> ] [ <vprime_iod> ] [ <vnid> ] [ <l3trm> ] [ <iropt> ] ]

Syntax Description


show	Show running system information
fabric	Fabric
multicast	Multicast information
vrf	Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display all VRFs NGMVPN is aware of
__readonly__	(Optional)
TABLE_vrf	(Optional)
context_name	(Optional)
context_id	(Optional)
vprime_iod	(Optional)
vnid	(Optional)
l3trm	(Optional)
iropt	(Optional)

Command Mode

/exec

show fabric switch information

show fabric switch information [ vsan <i0> ]

Syntax Description


show	Show running system information
fabric	Show Fabric Information
switch	Show switch details.
information	Show switch model, version and other details
vsan	(Optional) VSAN id
i0	(Optional) VSAN range

Command Mode

/exec

show fc2 bind

show fc2 bind [ __readonly__ { TABLE_fc2bind <SOCKET> <FLAGS> <NLEVEL> <RULE> <SINDEX> <VSAN> <D_ID> <MASK> <TYPE> <SUBTYPE> <M_VALUES> } ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
bind	show fc2 socket bindings
__readonly__	(Optional) Read only
TABLE_fc2bind	(Optional) show fc2 bind
SOCKET	(Optional) socket
FLAGS	(Optional) flags
NLEVEL	(Optional) nlevel
RULE	(Optional) rule
SINDEX	(Optional) sidnex
VSAN	(Optional) vsan
D_ID	(Optional) d_id
MASK	(Optional) mask
TYPE	(Optional) type
SUBTYPE	(Optional) subtype
M_VALUES	(Optional) m_values

Command Mode

/exec

show fc2 classf

show fc2 classf [ __readonly__ { TABLE_fc2classf <HIX> <VSAN> <S_ID> <D_ID> <IFIDX> <R_A_TOV> <E_D_TOV> <F-SO> <RC> <RS> <CS> <EE> <2-SO> <RS> <3-SO> <RS> <EECNT> <TCCNT> <FCNT> <REFCNT> } ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
classf	show fc2 classf sessions
__readonly__	(Optional) Read only
TABLE_fc2classf	(Optional) show fc2 classf
HIX	(Optional) hix
VSAN	(Optional) vsan
S_ID	(Optional) sid
D_ID	(Optional) did
IFIDX	(Optional) ifidx
R_A_TOV	(Optional) r_a_tov
E_D_TOV	(Optional) e_d_tov
F-SO	(Optional) f-so
RC	(Optional) rc
RS	(Optional) rs
CS	(Optional) cs
EE	(Optional) ee
2-SO	(Optional) 2-so
RS	(Optional) rs
3-SO	(Optional) 3-so
RS	(Optional) rs
EECNT	(Optional) eecnt
TCCNT	(Optional) tccnt
FCNT	(Optional) fcnt
REFCNT	(Optional) refcnt

Command Mode

/exec

show fc2 exchange

show fc2 exchange [ __readonly__ { TABLE_ExchngInfo [ <ECB_INUSE> ] [ <ECB_DROPPED> ] [ <ECB_TOTAL> ] [ <ECB_MAX> ] } [ TABLE_fc2exchange <HIX> <VSAN> <X_ID> <OX_ID> <RX_ID> <O_ID> <R_ID> <ESTAT> <STATE> <SOCKET> <DIFINDEX> <CS> <TYPE> <SEQID> <TCNT> <RCNT> <LO> <HI> <SSTAT> <LOGIN> ] ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
exchange	show fc2 active exchanges
__readonly__	(Optional) Read only
TABLE_ExchngInfo	(Optional) ecb info
ECB_INUSE	(Optional) ecb in use
ECB_DROPPED	(Optional) ecb dropped
ECB_TOTAL	(Optional) ecb total
ECB_MAX	(Optional) ecb threshold
TABLE_fc2exchange	(Optional) show fc2 exchange
HIX	(Optional) hix
VSAN	(Optional) vsan
X_ID	(Optional) xid
OX_ID	(Optional) oxid
RX_ID	(Optional) rxid
O_ID	(Optional) o_id
R_ID	(Optional) r_id
ESTAT	(Optional) estat
STATE	(Optional) state
SOCKET	(Optional) socket
DIFINDEX	(Optional) dIFINDEX
CS	(Optional) cs
TYPE	(Optional) type
SEQID	(Optional) seqid
TCNT	(Optional) tcnt
RCNT	(Optional) rcnt
LO	(Optional) lo
HI	(Optional) hi
SSTAT	(Optional) sstat
LOGIN	(Optional) login

Command Mode

/exec

show fc2 exchresp

show fc2 exchresp [ __readonly__ { TABLE_fc2exchresp <HIX> <VSAN> <OX_ID> <S_ID> <CS> <SIFINDEX> <OX_ID2> <RX_ID2> <O_ID> <R_ID> <ESTAT> <STATE> <SOCKET> <TYPE> <SEQID> <TCNT> <RCNT> <LO> <HI> <SSTAT> } ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
exchresp	show fc2 active responder exchanges
__readonly__	(Optional) Read only
TABLE_fc2exchresp	(Optional) show fc2 exchresp
HIX	(Optional) hix
VSAN	(Optional) vsan
OX_ID	(Optional) oxid
S_ID	(Optional) sid
CS	(Optional) cs
SIFINDEX	(Optional) sifindex
OX_ID2	(Optional) oxid
RX_ID2	(Optional) rxid
O_ID	(Optional) oid
R_ID	(Optional) rid
ESTAT	(Optional) estat
STATE	(Optional) state
SOCKET	(Optional) socket
TYPE	(Optional) type
SEQID	(Optional) seqid
TCNT	(Optional) tcnt
RCNT	(Optional) rcnt
LO	(Optional) lo
HI	(Optional) hi
SSTAT	(Optional) sstat

Command Mode

/exec

show fc2 flogi

show fc2 flogi [ __readonly__ { TABLE_fc2flogi <HIX> <VSAN> <S_ID> <FLOGI> <IFINDEX> <TYPE> } ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
flogi	show fc2 flogi table
__readonly__	(Optional) Read only
TABLE_fc2flogi	(Optional) show fc2 flogi
HIX	(Optional) hix
VSAN	(Optional) vsan
S_ID	(Optional) sid
FLOGI	(Optional) flogi
IFINDEX	(Optional) ifindex
TYPE	(Optional) type

Command Mode

/exec

show fc2 nport

show fc2 nport [ __readonly__ { TABLE_fc2nport <REF> <VSAN> <D_ID> <MASK> <FL> <ST> <IFINDEX> <CF> <TC> <2-SO> <IC> <RC> <RS> <CS> <EE> <3-SO> <3-SO-IC> <3-SO-RC> <3-SO-RS> <3-SO-CS> <3-SO-EE> } ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
nport	show fc2 local nports
__readonly__	(Optional) Read only
TABLE_fc2nport	(Optional) show fc2 nport
REF	(Optional) ref
VSAN	(Optional) vsan
D_ID	(Optional) did
MASK	(Optional) mask
FL	(Optional) fl
ST	(Optional) st
IFINDEX	(Optional) ifindex
CF	(Optional) cf
TC	(Optional) tc
2-SO	(Optional) 2so
IC	(Optional) ic
RC	(Optional) rc
RS	(Optional) rs
CS	(Optional) cs
EE	(Optional) ee
3-SO	(Optional) 3so
3-SO-IC	(Optional) 3so-ic
3-SO-RC	(Optional) 3so-rc
3-SO-RS	(Optional) 3so-rs
3-SO-CS	(Optional) 3so-cs
3-SO-EE	(Optional) 3so-ee

Command Mode

/exec

show fc2 plogi

show fc2 plogi [ __readonly__ { TABLE_fc2plogi <HIX> <ADDRESS> <VSAN> <S_ID> <D_ID> <IF_INDEX> <FL> <STATE> <CF> <TC> <2-SO> <IC> <RC> <RS> <CS> <EE> <3-SO> <3SO_IC> <3SO_RC> <3SO_RS> <3SO_CS> <3SO_EE> <EECNT> <TCCNT> <2CNT> <3CNT> <REFCNT> } ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
plogi	show fc2 plogi sessions
__readonly__	(Optional) Read only
TABLE_fc2plogi	(Optional) show fc2 plogi
HIX	(Optional) hix
ADDRESS	(Optional) address
VSAN	(Optional) vsan
S_ID	(Optional) sid
D_ID	(Optional) did
IF_INDEX	(Optional) ifindex
FL	(Optional) fl
STATE	(Optional) state
CF	(Optional) cf
TC	(Optional) tc
2-SO	(Optional) 2so
IC	(Optional) ic
RC	(Optional) rc
RS	(Optional) rs
CS	(Optional) cs
EE	(Optional) ee
3-SO	(Optional) 3so
3SO_IC	(Optional) ic
3SO_RC	(Optional) rc
3SO_RS	(Optional) rs
3SO_CS	(Optional) cs
3SO_EE	(Optional) ee
EECNT	(Optional) eecnt
TCCNT	(Optional) TCCNT
2CNT	(Optional) 2cnt
3CNT	(Optional) 3cnt
REFCNT	(Optional) refcnt

Command Mode

/exec

show fc2 plogi_pwwn

show fc2 plogi_pwwn [ __readonly__ { TABLE_fc2plogi_pwwn <HIX> <ADDRESS> <VSAN> <S_ID> <D_ID> <IFINDEX> <FL> <STATE> <PWWN> } ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
plogi_pwwn	show fc2 plogi pwwn entries
__readonly__	(Optional) Read only
TABLE_fc2plogi_pwwn	(Optional) show fc2 plogi_pwwn
HIX	(Optional) hix
ADDRESS	(Optional) address
VSAN	(Optional) vsan
S_ID	(Optional) s_id
D_ID	(Optional) d_id
IFINDEX	(Optional) ifindex
FL	(Optional) fl
STATE	(Optional) state
PWWN	(Optional) pwwn

Command Mode

/exec

show fc2 port brief

show fc2 port brief [ __readonly__ { TABLE_fc2portbrief <BAD_FRAME_RX> } [ TABLE_FCSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] [ TABLE_LBSTAT <IX> <ST> <MOD> <EMUL> <TXLBPKTS> <TXLBDROP> <RXLBPKTS> <RXLBDROP> ] [ TABLE_VFCSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] [ TABLE_VFCPOSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] [ TABLE_VFCSLOTSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
port	show fc2 physical port table
brief	display only active port counters
__readonly__	(Optional) Read only
TABLE_fc2portbrief	(Optional) bad frames received
BAD_FRAME_RX	(Optional) fc2 bad frames rx
TABLE_FCSTAT	(Optional) FC Stat table
IX	(Optional) index
ST	(Optional) status
MOD	(Optional) mode
EMUL	(Optional) TEemul
TXPKTS	(Optional) txpackets
TXDROP	(Optional) txdrops
TXERR	(Optional) txerrorcnt
RXPKTS	(Optional) rx packets
RXDROP	(Optional) rx drop
TABLE_LBSTAT	(Optional) LB Stat table
IX	(Optional) index
ST	(Optional) status
MOD	(Optional) mode
EMUL	(Optional) TEemul
TXLBPKTS	(Optional) tx lb packets
TXLBDROP	(Optional) tx lb drops
RXLBPKTS	(Optional) rx lb packets
RXLBDROP	(Optional) rx lb drop
TABLE_VFCSTAT	(Optional) VFC Stat table
IX	(Optional) index
ST	(Optional) status
MOD	(Optional) mode
EMUL	(Optional) TEemul
TXPKTS	(Optional) txpackets
TXDROP	(Optional) txdrops
TXERR	(Optional) txerrorcnt
RXPKTS	(Optional) rx packets
RXDROP	(Optional) rx drop
TABLE_VFCPOSTAT	(Optional) VFC po Stat table
IX	(Optional) index
ST	(Optional) status
MOD	(Optional) mode
EMUL	(Optional) TEemul
TXPKTS	(Optional) txpackets
TXDROP	(Optional) txdrops
TXERR	(Optional) txerrorcnt
RXPKTS	(Optional) rx packets
RXDROP	(Optional) rx drop
TABLE_VFCSLOTSTAT	(Optional) VFC slot Stat table
IX	(Optional) index
ST	(Optional) status
MOD	(Optional) mode
EMUL	(Optional) TEemul
TXPKTS	(Optional) txpackets
TXDROP	(Optional) txdrops
TXERR	(Optional) txerrorcnt
RXPKTS	(Optional) rx packets
RXDROP	(Optional) rx drop

Command Mode

/exec

show fc2 port drops

show fc2 port drops [ __readonly__ [ TABLE_FCSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] [ TABLE_LBSTAT <IX> <ST> <MOD> <EMUL> <TXLBPKTS> <TXLBDROP> <RXLBPKTS> <RXLBDROP> ] [ TABLE_VFCSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] [ TABLE_VFCPOSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] [ TABLE_VFCSLOTSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
port	show fc2 physical port table
drops	display active port drop counters
__readonly__	(Optional) Read only
TABLE_FCSTAT	(Optional) FC Stat table
IX	(Optional) index
ST	(Optional) status
MOD	(Optional) mode
EMUL	(Optional) TEemul
TXPKTS	(Optional) txpackets
TXDROP	(Optional) txdrops
TXERR	(Optional) txerrorcnt
RXPKTS	(Optional) rx packets
RXDROP	(Optional) rx drop
TABLE_LBSTAT	(Optional) LB Stat table
IX	(Optional) index
ST	(Optional) status
MOD	(Optional) mode
EMUL	(Optional) TEemul
TXLBPKTS	(Optional) tx lb packets
TXLBDROP	(Optional) tx lb drops
RXLBPKTS	(Optional) rx lb packets
RXLBDROP	(Optional) rx lb drop
TABLE_VFCSTAT	(Optional) VFC Stat table
IX	(Optional) index
ST	(Optional) status
MOD	(Optional) mode
EMUL	(Optional) TEemul
TXPKTS	(Optional) txpackets
TXDROP	(Optional) txdrops
TXERR	(Optional) txerrorcnt
RXPKTS	(Optional) rx packets
RXDROP	(Optional) rx drop
TABLE_VFCPOSTAT	(Optional) VFC po Stat table
IX	(Optional) index
ST	(Optional) status
MOD	(Optional) mode
EMUL	(Optional) TEemul
TXPKTS	(Optional) txpackets
TXDROP	(Optional) txdrops
TXERR	(Optional) txerrorcnt
RXPKTS	(Optional) rx packets
RXDROP	(Optional) rx drop
TABLE_VFCSLOTSTAT	(Optional) VFC slot Stat table
IX	(Optional) index
ST	(Optional) status
MOD	(Optional) mode
EMUL	(Optional) TEemul
TXPKTS	(Optional) txpackets
TXDROP	(Optional) txdrops
TXERR	(Optional) txerrorcnt
RXPKTS	(Optional) rx packets
RXDROP	(Optional) rx drop

Command Mode

/exec

show fc2 port state

show fc2 port state [ __readonly__ [ TABLE_FCPORTSTATE [ <PORT_STRING> ] [ <PORT_NO> ] [ <UP_DOWN_CNTR> ] [ [ <UP_STRING> ] + [ <UP_TIME> ] + [ <UP_REFTIME> ] + [ <DOWN_STRING> ] + [ <DOWN_TIME> ] + [ <DOWN_REFTIME> ] + ] + ] [ TABLE_VFCPORTSTATE [ <PORT_STRING> ] [ <PORT_NO> ] [ <UP_DOWN_CNTR> ] [ [ <UP_STRING> ] + [ <UP_TIME> ] + [ <UP_REFTIME> ] + [ <DOWN_STRING> ] + [ <DOWN_TIME> ] + [ <DOWN_REFTIME> ] + ] + ] [ TABLE_VFCPOPORTSTATE [ <PORT_STRING> ] [ <PORT_NO> ] [ <UP_DOWN_CNTR> ] [ [ <UP_STRING> ] + [ <UP_TIME> ] + [ <UP_REFTIME> ] + [ <DOWN_STRING> ] + [ <DOWN_TIME> ] + [ <DOWN_REFTIME> ] + ] + ] [ TABLE_VFCPORTSLOTSTATE [ <PORT_STRING> ] [ <PORT_NO> ] [ <UP_DOWN_CNTR> ] [ [ <UP_STRING> ] + [ <UP_TIME> ] + [ <UP_REFTIME> ] + [ <DOWN_STRING> ] + [ <DOWN_TIME> ] + [ <DOWN_REFTIME> ] + ] + ] ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
port	show fc2 physical port table
state	display port state history
__readonly__	(Optional) Read only
TABLE_FCPORTSTATE	(Optional) fc port state change history
PORT_STRING	(Optional) port name
PORT_NO	(Optional) port number
UP_DOWN_CNTR	(Optional) up-down counter
UP_STRING	(Optional) up
UP_TIME	(Optional) up time
UP_REFTIME	(Optional) up from
DOWN_STRING	(Optional) down string
DOWN_TIME	(Optional) down time
DOWN_REFTIME	(Optional) down from
TABLE_VFCPORTSTATE	(Optional) vfc port state change history
PORT_STRING	(Optional) port name
PORT_NO	(Optional) port number
UP_DOWN_CNTR	(Optional) up-down counter
UP_STRING	(Optional) up
UP_TIME	(Optional) up time
UP_REFTIME	(Optional) up from
DOWN_STRING	(Optional) down string
DOWN_TIME	(Optional) down time
DOWN_REFTIME	(Optional) down from
TABLE_VFCPOPORTSTATE	(Optional) vfc po port state change history
PORT_STRING	(Optional) port name
PORT_NO	(Optional) port number
UP_DOWN_CNTR	(Optional) up-down counter
UP_STRING	(Optional) up
UP_TIME	(Optional) up time
UP_REFTIME	(Optional) up from
DOWN_STRING	(Optional) down string
DOWN_TIME	(Optional) down time
DOWN_REFTIME	(Optional) down from
TABLE_VFCPORTSLOTSTATE	(Optional) vfc port slot state change history
PORT_STRING	(Optional) port name
PORT_NO	(Optional) port number
UP_DOWN_CNTR	(Optional) up-down counter
UP_STRING	(Optional) up
UP_TIME	(Optional) up time
UP_REFTIME	(Optional) up from
DOWN_STRING	(Optional) down string
DOWN_TIME	(Optional) down time
DOWN_REFTIME	(Optional) down from

Command Mode

/exec

show fc2 socket

show fc2 socket [ __readonly__ { TABLE_fc2socket <SOCKET> <REFCNT> <PROTOCOL> <FLAGS> <PID> <RCVBUF> <RMEM_USED> <QLEN> <NOTSK> } ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
socket	show fc2 active sockets
__readonly__	(Optional) Read only
TABLE_fc2socket	(Optional) show fc2 socket
SOCKET	(Optional) socket
REFCNT	(Optional) refcnt
PROTOCOL	(Optional) protocol
FLAGS	(Optional) flags
PID	(Optional) pid
RCVBUF	(Optional) rcvbuf
RMEM_USED	(Optional) rmem_used
QLEN	(Optional) qlen
NOTSK	(Optional) not_sk

Command Mode

/exec

show fc2 sockexch

show fc2 sockexch [ __readonly__ { TABLE_fc2sockexch <SOCKET> <VSAN> <X_ID> <OX_ID> <RX_ID> <O_ID> <R_ID> <ESTAT> <STATE> <CS> <TYPE> <SK> } ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
sockexch	show fc2 active exchanges for each socket
__readonly__	(Optional) Read only
TABLE_fc2sockexch	(Optional) show fc2 sockexch
SOCKET	(Optional) socket
VSAN	(Optional) vsan
X_ID	(Optional) x_id
OX_ID	(Optional) oxid
RX_ID	(Optional) rxid
O_ID	(Optional) o_id
R_ID	(Optional) r_id
ESTAT	(Optional) estat
STATE	(Optional) state
CS	(Optional) cs
TYPE	(Optional) type
SK	(Optional) sk

Command Mode

/exec

show fc2 socknotify

show fc2 socknotify [ __readonly__ { TABLE_fc2socknotify <SOCKET> <ADDRESS> <REF> <VSAN> <D_ID> <MASK> <FL> <ST> <IFINDEX> } ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
socknotify	show fc2 local nport plogi/logo notifications per each socket
__readonly__	(Optional) Read only
TABLE_fc2socknotify	(Optional) show fc2 socknotify
SOCKET	(Optional) socket
ADDRESS	(Optional) address
REF	(Optional) ref
VSAN	(Optional) vsan
D_ID	(Optional) d_id
MASK	(Optional) mask
FL	(Optional) fl
ST	(Optional) st
IFINDEX	(Optional) ifindex

Command Mode

/exec

show fc2 socknport

show fc2 socknport [ __readonly__ { TABLE_fc2socknport <SOCKET> <ADDRESS> <REF> <VSAN> <D_ID> <MASK> <FL> <ST> <IFINDEX> } ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
socknport	show fc2 local nports per each socket
__readonly__	(Optional) Read only
TABLE_fc2socknport	(Optional) show fc2 socknport
SOCKET	(Optional) socket
ADDRESS	(Optional) address
REF	(Optional) ref
VSAN	(Optional) vsan
D_ID	(Optional) d_id
MASK	(Optional) mask
FL	(Optional) fl
ST	(Optional) st
IFINDEX	(Optional) ifindex

Command Mode

/exec

show fc2 vsan

show fc2 vsan [ __readonly__ { TABLE_fc2vsan <VSAN> <X_ID> <E_D_TOV> <R_A_TOV> <WWN> <IOP_MODE> } ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
vsan	show fc2 vsan table
__readonly__	(Optional) Read only
TABLE_fc2vsan	(Optional) show fc2 vsan
VSAN	(Optional) vsan
X_ID	(Optional) xid
E_D_TOV	(Optional) e_d_tov
R_A_TOV	(Optional) r_a_tov
WWN	(Optional) wwn
IOP_MODE	(Optional) iop_mode

Command Mode

/exec

show fcalias

show fcalias [ [ name <s0> ] [ [ pending ] [ vsan <i0> ] ] ]

Syntax Description


show	Show running system information
fcalias	Fcalias show commands
name	(Optional) Show members of a specified fcalias
s0	(Optional) Enter the name of fcalias
pending	(Optional) Show members of a specified fcalias in session
vsan	(Optional) Show aliases belonging to the specified VSAN
i0	(Optional) VSAN id range

Command Mode

/exec

show fcdomain

Syntax Description


show	Show running system information
fcdomain	Show fcdomain information

Command Mode

/exec

show fcdomain address-allocation

show fcdomain address-allocation [ { cache | vsan <i0> } ]

Syntax Description


show	Show running system information
fcdomain	Show fcdomain information
address-allocation	Show statistics for the fcid allocation
cache	(Optional) Show cache content for the fcid allocation
vsan	(Optional) Specify the vsan id
i0	(Optional) VSAN id

Command Mode

/exec

show fcdomain allowed

show fcdomain allowed [ vsan <i0> ]

Syntax Description


show	Show running system information
fcdomain	Show fcdomain information
allowed	Show list of allowed domain IDs
vsan	(Optional) Specify the vsan id
i0	(Optional) VSAN id

Command Mode

/exec

show fcdomain domain-list

show fcdomain domain-list [ vsan <i0> ]

Syntax Description


show	Show running system information
fcdomain	Show fcdomain information
domain-list	Show list of domain IDs granted by the principal sw
vsan	(Optional) Specify the vsan id
i0	(Optional) VSAN id

Command Mode

/exec

show fcdomain fcid persistent

show fcdomain fcid persistent [ { unused [ vsan <i0> ] | vsan1 <i1> } ]

Syntax Description


show	Show running system information
fcdomain	Show fcdomain information
fcid	Show persistent FCIDs (across reboot)
persistent	Show persistent FCIDs (across reboot)
unused	(Optional) Show unused persistent FCIDs (across reboot)
vsan	(Optional) Specify the vsan id
i0	(Optional) VSAN id
vsan1	(Optional) Specify the vsan id
i1	(Optional) VSAN id

Command Mode

/exec

show fcdomain pending-diff

show fcdomain pending-diff [ vsan <i0> ]

Syntax Description


show	Show running system information
fcdomain	Show fcdomain information
pending-diff	Show the difference between running and pending configuration
vsan	(Optional) Specify the vsan id
i0	(Optional) VSAN id

Command Mode

/exec

show fcdomain pending

show fcdomain pending [ vsan <i0> ]

Syntax Description


show	Show running system information
fcdomain	Show fcdomain information
pending	Show the pending configuration
vsan	(Optional) Specify the vsan id
i0	(Optional) VSAN id

Command Mode

/exec

show fcdomain session-status

show fcdomain session-status [ vsan <i0> ]

Syntax Description


show	Show running system information
fcdomain	Show fcdomain information
session-status	Show the last action performed by fcdomain
vsan	(Optional) Specify the vsan id
i0	(Optional) VSAN id

Command Mode

/exec

show fcdomain statistics

show fcdomain statistics [ { interface <if0> [ vsan <i0> ] | vsan1 <i1> } ]

Syntax Description


show	Show running system information
fcdomain	Show fcdomain information
statistics	Show the statistics of fcdomain
interface	(Optional) Specify the fibre channel interface
if0	(Optional)
vsan	(Optional) Specify the vsan id
i0	(Optional) VSAN id
vsan1	(Optional) Specify the vsan id
i1	(Optional) VSAN id

Command Mode

/exec

show fcdomain status

Syntax Description


show	Show running system information
fcdomain	Show fcdomain information
status	Show all vsan-independent information in fcdomain

Command Mode

/exec

show fcdomain vsan

show fcdomain vsan <i0>

Syntax Description


show	Show running system information
fcdomain	Show fcdomain information
vsan	Specify the vsan id
i0	VSAN id

Command Mode

/exec

show fcdroplatency

show fcdroplatency [ { network | switch } ] [ __readonly__ [ <switch_latency> ] [ <global_network_latency> ] [ TABLE_vsan_network_latency { <vsan-no> <network-latency> } ] ]

Syntax Description


show	Show running system information
fcdroplatency	show switch or network latency
network	(Optional) network latency in milliseconds
switch	(Optional) switch latency in milliseconds
__readonly__	(Optional)
switch_latency	(Optional) Switch latency value
global_network_latency	(Optional) global network latency value
TABLE_vsan_network_latency	(Optional) VSAN specific network latency settings
vsan-no	(Optional) vsan number
network-latency	(Optional) VSAN specific network latency

Command Mode

/exec

show fcid-allocation area

Syntax Description


show	Show running system information
fcid-allocation	Show information about fcid-allocation list
area	Show information about fcid-allocation list

Command Mode

/exec

show fcid-allocation company-id-from-wwn

show fcid-allocation company-id-from-wwn <wwn0>

Syntax Description


show	Show running system information
fcid-allocation	Show information about fcid-allocation list
company-id-from-wwn	Company id (or OUI).
wwn0	Enter WWN to extract company_id/oui

Command Mode

/exec

show fcns database

show fcns database [ { detail [ vsan <i0> ] | domain <i1> [ { detail [ vsan1 <i2> ] | vsan2 <i3> } ] | fcid <fcid4> { detail2 vsan3 <i5> | vsan4 <i6> } | local [ { detail1 [ vsan5 <i7> ] | vsan6 <i8> } ] | npv [ { detail1 [ vsan7 <i9> ] | node_wwn <wwn10> [ vsan8 <i11> ] | vsan9 <i12> } ] | proxy-host { detail4 vsan10 <i13> | vsan11 <i14> } | vsan12 <i15> } ]

Syntax Description


show	Show running system information
fcns	show name server tables
database	show name server database
detail	(Optional) show all objects in each entry
vsan	(Optional) show local entries for the given vsan(s)
i0	(Optional) VSAN id range
domain	(Optional) show entries in a domain
i1	(Optional) domain-id
detail	(Optional) show all objects in each entry
vsan1	(Optional) show entries for a domain for the given vsan(s)
i2	(Optional) VSAN id range
vsan2	(Optional) show entries for a domain for the given vsan(s)
i3	(Optional) VSAN id range
fcid	(Optional) show entry for the given port
fcid4	(Optional) enter FCID
detail2	(Optional) show all objects in the entry
vsan3	(Optional) show port entry for the given vsan
i5	(Optional) VSAN id
vsan4	(Optional) show port entry for the given vsan
i6	(Optional) VSAN id
local	(Optional) show local entries
detail1	(Optional) show all objects in each entry
vsan5	(Optional) show local entries for the given vsan(s)
i7	(Optional) VSAN id range
vsan6	(Optional) show local entries for the given vsan(s)
i8	(Optional) VSAN id range
npv	(Optional) show n-port virtualization (npv) entries
detail1	(Optional) show all objects in each entry
vsan7	(Optional) show npv entries for the given vsan(s)
i9	(Optional) VSAN id range
node_wwn	(Optional) show end-devices logged in via an npv node
wwn10	(Optional) Node WWN of NPV
vsan8	(Optional) show npv entries for the given vsan(s)
i11	(Optional) VSAN id range
vsan9	(Optional) show npv entries for the given vsan(s)
i12	(Optional) VSAN id range
proxy-host	(Optional) show entry for the proxy-host
detail4	(Optional) show all objects in the entry
vsan10	(Optional) show port entry for the given vsan
i13	(Optional) VSAN id
vsan11	(Optional) show port entry for the given vsan
i14	(Optional) VSAN id
vsan12	(Optional) show entries for the given vsan(s)
i15	(Optional) VSAN id range

Command Mode

/exec

show fcns statistics

show fcns statistics [ { detail [ vsan <i0> ] | vsan1 <i1> } ]

Syntax Description


show	Show running system information
fcns	show name server tables
statistics	show name server statistics
detail	(Optional) show detailed statistics
vsan	(Optional) show detailed statistics for the vsan(s)
i0	(Optional) VSAN id range
vsan1	(Optional) show statistics for the vsan(s)
i1	(Optional) VSAN id range

Command Mode

/exec

show fcoe-npv issu-impact

show fcoe-npv issu-impact [ __readonly__ { <is_impact> } [ TABLE_interface <vfc_intf> <fc_id> ] ]

Syntax Description


show	Show running system informationrunning system information
fcoe-npv	feature fcoe-npv
issu-impact	Show feature fcoe-npv config issues if attempting to do non-disruptive ISSU
__readonly__	(Optional) Read Only
is_impact	(Optional) show issu impact
TABLE_interface	(Optional) show fcoe database
vfc_intf	(Optional) vfc port Interface index
fc_id	(Optional) vfc port FCID

Command Mode

/exec

show fcoe

show fcoe [ __readonly__ { TABLE_fcf <fcf_if_index> <fcf_mac> <fc_map> <fcf_priority> <fka_Advertisement> } [ TABLE_vfc <vfc_name> <vfcf_mac> ] ]

Syntax Description


show	Show running system information
fcoe	Show FCOE paramaters
__readonly__	(Optional) Read Only
TABLE_fcf	(Optional) fcf table
fcf_if_index	(Optional) fcf if index
fcf_mac	(Optional) fcf mac
fc_map	(Optional) fc map
fcf_priority	(Optional) fcf priority
fka_Advertisement	(Optional) fka Advertisement
TABLE_vfc	(Optional) vfc details table for sup
vfc_name	(Optional) vfc name
vfcf_mac	(Optional) vfcf mac

Command Mode

/exec

show fcoe database

show fcoe database [ __readonly__ { TABLE_interface <interface> [ <fcid> ] [ <port_name> ] <mac_address> } <flogi_count> [ TABLE_veport <interface> <mac_address> <vsan> ] ]

Syntax Description


show	Show running system information
fcoe	Show FCOE paramaters
database	Show FCOE database
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show fcoe database
fcid	(Optional) fcid
port_name	(Optional) port name
mac_address	(Optional) mac address
interface	(Optional) ve port Interface index
TABLE_veport	(Optional) ve port details
mac_address	(Optional) ve port mac address
flogi_count	(Optional) flogi_count
vsan	(Optional) ve port VSAN trunking

Command Mode

/exec

show fcs database

show fcs database [ vsan <i0> ]

Syntax Description


show	Show running system information
database	Show local database of FCS
vsan	(Optional) Show local database for a VSAN
i0	(Optional) VSAN range

Command Mode

/exec

show fcs ie

show fcs ie [ { nwwn <wwn0> vsan <i1> | vsan1 <i2> } ]

Syntax Description


show	Show running system information
ie	Show Interconnect Element Objects Information
nwwn	(Optional) IE WWN
wwn0	(Optional) IE WWN
vsan	(Optional) VSAN id of IE
i1	(Optional) VSAN id
vsan1	(Optional) VSAN id of IE
i2	(Optional) VSAN range

Command Mode

/exec

show fcs platform

show fcs platform { name <s0> vsan <i0> | vsan1 <i1> }

Syntax Description


show	Show running system information
platform	Show Platform Objects Information
name	Platform Name
s0	Platform name string
vsan	VSAN id of the platform
i0	VSAN id
vsan1	VSAN id of the platform
i1	VSAN range

Command Mode

/exec

show fcs port

show fcs port { pwwn <wwn0> vsan <i1> | vsan1 <i2> }

Syntax Description


show	Show running system information
port	Show Port Objects Information
pwwn	Port WWN
wwn0	Port WWN
vsan	VSAN id of the port
i1	VSAN id
vsan1	VSAN id of the port
i2	VSAN range

Command Mode

/exec

show fcs statistics

show fcs statistics [ vsan <i0> ]

Syntax Description


show	Show running system information
statistics	Show statistics for FCS packets.
vsan	(Optional) Show statistics for a VSAN
i0	(Optional) VSAN range

Command Mode

/exec

show fcs vsan

Syntax Description


show	Show running system information
vsan	Show list of all the VSANs and plat-check-mode for each

Command Mode

/exec

show fctimer

show fctimer [ __readonly__ { <F_S_TOV> <D_S_TOV> <E_D_TOV> <R_A_TOV> } ]

Syntax Description


show	show running system information
fctimer	show Fibre Channel timers
__readonly__	(Optional) Read only
F_S_TOV	(Optional) F_S_TOV
D_S_TOV	(Optional) D_S_TOV
E_D_TOV	(Optional) E_D_TOV
R_A_TOV	(Optional) R_A_TOV

Command Mode

/exec

show fctimer D_S_TOV

show fctimer D_S_TOV [ vsan <i0> ] [ __readonly__ [ TABLE_D_S_TOV [ <vsan-no> ] <D_S_TOV> ] [ <non-exist-vsan> ] ]

Syntax Description


show	Show running system information
fctimer	show Fibre Channel timers
D_S_TOV	D_S_TOV in milliseconds
vsan	(Optional) Specify VSAN id
i0	(Optional) VSAN id range
__readonly__	(Optional)
TABLE_D_S_TOV	(Optional) table D_S_TOV
vsan-no	(Optional) vsan number
D_S_TOV	(Optional) D_S_TOV
non-exist-vsan	(Optional) non configured vsans

Command Mode

/exec

show fctimer E_D_TOV

show fctimer E_D_TOV [ vsan <i0> ] [ __readonly__ [ TABLE_E_D_TOV [ <vsan-no> ] <E_D_TOV> ] [ <non-exist-vsan> ] ]

Syntax Description


show	Show running system information
fctimer	show Fibre Channel timers
E_D_TOV	E_D_TOV in milliseconds
vsan	(Optional) Specify VSAN id
i0	(Optional) VSAN id range
__readonly__	(Optional)
TABLE_E_D_TOV	(Optional) table
vsan-no	(Optional) vsan number
E_D_TOV	(Optional) E_D_TOV
non-exist-vsan	(Optional) not exist vsans

Command Mode

/exec

show fctimer F_S_TOV

show fctimer F_S_TOV [ vsan <i0> ] [ __readonly__ [ TABLE_F_S_TOV [ <vsan-no> ] <F_S_TOV> ] [ <non-exist-vsan> ] ]

Syntax Description


show	Show running system information
fctimer	show Fibre Channel timers
F_S_TOV	F_S_TOV in milliseconds
vsan	(Optional) Specify VSAN id
i0	(Optional) VSAN id range
__readonly__	(Optional)
TABLE_F_S_TOV	(Optional) table
vsan-no	(Optional) vsan number
F_S_TOV	(Optional) F_S_TOV
non-exist-vsan	(Optional) not exist vsans

Command Mode

/exec

show fctimer R_A_TOV

show fctimer R_A_TOV [ vsan <i0> ] [ __readonly__ [ TABLE_R_A_TOV [ <vsan-no> ] <R_A_TOV> ] [ <non-exist-vsan> ] ]

Syntax Description


show	Show running system information
fctimer	show Fibre Channel timers
R_A_TOV	R_A_TOV in milliseconds
vsan	(Optional) Specify VSAN id
i0	(Optional) VSAN id range
__readonly__	(Optional)
TABLE_R_A_TOV	(Optional) table
vsan-no	(Optional) vsan number
R_A_TOV	(Optional) R_A_TOV
non-exist-vsan	(Optional) non exist vsans

Command Mode

/exec

show fctimer last action status

show fctimer last action status [ __readonly__ [ <vsan> ] <last_action_timestamp> <last_action> <last_action_result> <last_action_failure_reason> ]

Syntax Description


show	Show running system information
fctimer	show Fibre Channel timers
last	Show the status of the last cfs commit/abort operation
action	Show the status of the last cfs commit/abort operation
status	Show the status of the last cfs commit/abort operation
__readonly__	(Optional) Readonly
vsan	(Optional) Vsan
last_action_timestamp	(Optional) Last action timestamp
last_action	(Optional) Last action
last_action_result	(Optional) Last action result
last_action_failure_reason	(Optional) Last action failure reason

Command Mode

/exec

show fctimer pending-diff

show fctimer pending-diff [ __readonly__ <status_fctimer> ]

Syntax Description


show	Show running system information
fctimer	show Fibre Channel timers
pending-diff	Show the difference between pending database and running config
__readonly__	(Optional)
status_fctimer	(Optional) Show the difference between pending database and running config

Command Mode

/exec

show fctimer pending

show fctimer pending [ __readonly__ <status_fctimer> ]

Syntax Description


show	Show running system information
fctimer	show Fibre Channel timers
pending	Show the status of pending fctimer commands
__readonly__	(Optional)
status_fctimer	(Optional) Show the status of pending fctimer commands

Command Mode

/exec

show fctimer session status

show fctimer session status [ __readonly__ [ <vsan> ] <last_action_timestamp> <last_action> <last_action_result> <last_action_failure_reason> ]

Syntax Description


show	Show running system information
fctimer	show Fibre Channel timers
session	Show the state of fctimer cfs session
status	Show the status of the last cfs commit/abort operation
__readonly__	(Optional) Readonly
vsan	(Optional) Vsan
last_action_timestamp	(Optional) Last action timestamp
last_action	(Optional) Last action
last_action_result	(Optional) Last action result
last_action_failure_reason	(Optional) Last action failure reason

Command Mode

/exec

show fctimer status

show fctimer status [ __readonly__ <Distribution> ]

Syntax Description


show	Show running system information
fctimer	show Fibre Channel timers
status	cfs distribution is enabled or disabled
__readonly__	(Optional) read only
Distribution	(Optional) distribution

Command Mode

/exec

show fctimer vsan

show fctimer vsan <i0> [ __readonly__ { TABLE_fctimer <vsan-no> <F_S_TOV> <D_S_TOV> <E_D_TOV> <R_A_TOV> } [ <non-exist-vsan> ] ]

Syntax Description


show	Show running system information
fctimer	show Fibre Channel timers
vsan	Specify VSAN id
i0	VSAN id range
__readonly__	(Optional) Read only
TABLE_fctimer	(Optional) table
vsan-no	(Optional) vsan number
F_S_TOV	(Optional) F_S_TOV
D_S_TOV	(Optional) D_S_TOV
E_D_TOV	(Optional) E_D_TOV
R_A_TOV	(Optional) R_A_TOV
non-exist-vsan	(Optional) non exist vsans

Command Mode

/exec

show fdmi database

Syntax Description


show	Show running system information
fdmi	Show fdmi information
database	show fdmi database

Command Mode

/exec

show fdmi database detail

Syntax Description


show	Show running system information
fdmi	Show fdmi information
database	show fdmi database
detail	show all objects in each entry

Command Mode

/exec

show fdmi database detail hba-id vsan

show fdmi database detail hba-id <wwn0> vsan <i1>

Syntax Description


show	Show running system information
fdmi	Show fdmi information
database	show fdmi database
detail	show all objects in each entry
hba-id	show entries for the given HBA id
wwn0	HBA id
vsan	show HBA id the given vsan
i1	VSAN id

Command Mode

/exec

show fdmi database detail vsan

show fdmi database detail vsan <i0>

Syntax Description


show	Show running system information
fdmi	Show fdmi information
database	show fdmi database
detail	show all objects in each entry
vsan	show entries for the given vsan(s)
i0	VSAN id range

Command Mode

/exec

show fdmi database vsan

show fdmi database vsan <i0>

Syntax Description


show	Show running system information
fdmi	Show fdmi information
database	show fdmi database
vsan	show entries for the given vsan(s)
i0	VSAN id range

Command Mode

/exec

show fdmi suppress-updates

Syntax Description


show	Show running system information
fdmi	Show fdmi information
suppress-updates	Show vsans on which updates are suppressed

Command Mode

/exec

show feature-set

show feature-set [ <name> ] [ <id> ] [ __readonly__ TABLE_cfcFeatureSetTable <cfcFeatureSetIndex> <cfcFeatureSetName> <cfcFeatureSetAction> <cfcFeatureSetLastAction> <cfcFeatureSetLastActionResult> <cfcFeatureSetLastFailureReason> <cfcFeatureSetOpStatus> <cfcFeatureSetOpStatusReason> ]

Syntax Description


show	Show running system information
feature-set	Show feature set status
name	(Optional) feature-set name
id	(Optional) feature-set id
__readonly__	(Optional)
TABLE_cfcFeatureSetTable	(Optional) feature-set table
cfcFeatureSetIndex	(Optional) feature-set table index
cfcFeatureSetName	(Optional) feature-set name
cfcFeatureSetAction	(Optional) action
cfcFeatureSetLastAction	(Optional) last action
cfcFeatureSetLastActionResult	(Optional) last action result
cfcFeatureSetLastFailureReason	(Optional) last failure reason
cfcFeatureSetOpStatus	(Optional) operation status
cfcFeatureSetOpStatusReason	(Optional) operation status

Command Mode

/exec

show feature-set services

show feature-set services <s0> [ __readonly__ [ { TABLE_services <service_name> } ] { <count> <feature_set> } ]

Syntax Description


show	Show running system information
feature-set	Show feature set status
services	Show services in feature set
__readonly__	(Optional)
TABLE_services	(Optional) all service names in feature set
service_name	(Optional) name of the service
count	(Optional) number of services in the feature set
feature_set	(Optional) feature set name
s0	Name of feature set

Command Mode

/exec

show feature

show feature [ __readonly__ [ { TABLE_cfcFeatureCtrlTable <cfcFeatureCtrlIndex2> <cfcFeatureCtrlInstanceNum2> <cfcFeatureCtrlName2> <cfcFeatureCtrlAction2> <cfcFeatureCtrlLastAction2> <cfcFeatureCtrlLastActionResult2> <cfcFeatureCtrlLastFailureReason2> <cfcFeatureCtrlOpStatus2> <cfcFeatureCtrlOpStatusReason2> <cfcFeatureCtrlTag2> } ] ]

Syntax Description


show	Show running system information
feature	Show feature status
__readonly__	(Optional)
TABLE_cfcFeatureCtrlTable	(Optional) feature table
cfcFeatureCtrlIndex2	(Optional) feature table index
cfcFeatureCtrlInstanceNum2	(Optional) instance number
cfcFeatureCtrlName2	(Optional) feature name
cfcFeatureCtrlAction2	(Optional) Action to be triggered for the feature
cfcFeatureCtrlLastAction2	(Optional) Last action triggered for the feature
cfcFeatureCtrlLastActionResult2	(Optional) The result of execution of the last action
cfcFeatureCtrlLastFailureReason2	(Optional) Failure Reason
cfcFeatureCtrlOpStatus2	(Optional) operation status
cfcFeatureCtrlOpStatusReason2	(Optional) Reason for current operation status
cfcFeatureCtrlTag2	(Optional) Name of the instance in string format in case of multinstance feature

Command Mode

/exec

show fex interface priority-flow-control

show fex { <fexnum> interface | interface [ <if_list> ] } priority-flow-control [ detail ] [ __readonly__ [ TABLE_pfc_interface <if_name_str> <admin> <oper> [ <oper_vl_bmap> ] [ <cos-list> ] <rx-stats> <tx-stats> [ <rx_ppp_cos_0> ] [ <rx_ppp_cos_1> ] [ <rx_ppp_cos_2> ] [ <rx_ppp_cos_3> ] [ <rx_ppp_cos_4> ] [ <rx_ppp_cos_5> ] [ <rx_ppp_cos_6> ] [ <rx_ppp_cos_7> ] [ <tx_ppp_cos_0> ] [ <tx_ppp_cos_1> ] [ <tx_ppp_cos_2> ] [ <tx_ppp_cos_3> ] [ <tx_ppp_cos_4> ] [ <tx_ppp_cos_5> ] [ <tx_ppp_cos_6> ] [ <tx_ppp_cos_7> ] ] ]

Syntax Description


show	commands to display
fex	Show FEX information
fexnum	FEX number
interface	Interface for displaying PFC information
if_list	(Optional) List of interfaces
priority-flow-control	Show interface PFC information
detail	(Optional) Show detailed per priority Tx/Rx PFC statistics
__readonly__	(Optional)
if_name_str	(Optional) interface name
TABLE_pfc_interface	(Optional) PFC information of an interface
admin	(Optional) PFC admin
oper	(Optional) PFC oper
oper_vl_bmap	(Optional) VL bitmap value
cos-list	(Optional) List of class-of-service values

Command Mode

/exec

show fhrp

show fhrp [ <intf> ] [ __readonly__ { TABLE_brief <intf_name> <intf_state> <ipv4_state> <ipv6_state> <hardware_status> <refcount> } ]

Syntax Description


fhrp	FHRP Show commands
show	Show running system information
intf	(Optional) Specify a single interface
__readonly__	(Optional)
TABLE_brief	(Optional) Show brief FHRP interface information
intf_name	(Optional) Interface name
intf_state	(Optional) Interface state
ipv4_state	(Optional) Interface IPv4 state
ipv6_state	(Optional) Interface IPv6 state
hardware_status	(Optional) Interface hardware status
refcount	(Optional) Interface refcount

Command Mode

/exec

show fhrp verbose

show fhrp [ <intf> ] verbose [ __readonly__ { TABLE_det <intf_name> <handle> <refcount> { TABLE_clients <client_id> <client_name> } <running> <expired> <v_retries> <v_time> <r_delay> <min_delay> <remaining_delay> <i_state> <ipv4_state> <ipv6_state> <h_state> <int_l2> } ]

Syntax Description


fhrp	FHRP Show commands
show	Show running system information
intf	(Optional) Specify a single interface
verbose	Display detailed information
__readonly__	(Optional)
TABLE_det	(Optional) Detailed FHRP interface information
intf_name	(Optional) Interface name
handle	(Optional) Interface handle
refcount	(Optional) Reference count
TABLE_clients	(Optional) FHRP clients present on interface
client_id	(Optional) FHRP client id
client_name	(Optional) FHRP client name
running	(Optional) Time verify up timer running
expired	(Optional) Verify up timer has expired
v_retries	(Optional) Verify retries
v_time	(Optional) Verify remaining time
r_delay	(Optional) Reload delay
min_delay	(Optional) Min delay
remaining_delay	(Optional) Remaining delay
i_state	(Optional) Interface state
ipv4_state	(Optional) Interface IPv4 state
ipv6_state	(Optional) Interface IPv6 state
h_state	(Optional) Interface hardware state
int_l2	(Optional) Interface is L2-only

Command Mode

/exec

show file

show file <uri0> [ cksum | md5sum | sha256sum | sha512sum ] [ __readonly__ { [ <file_content> ] + [ <file_content_cksum> ] [ <file_content_md5sum> ] [ <file_content_sha256sum> ] [ <file_content_sha512sum> ] } ]

Syntax Description


show	Show running system information
file	Displays content of files
uri0	Filename to be displayed
cksum	(Optional) Displays CRC checksum for a file
md5sum	(Optional) Displays MD5 checksum for a file
sha256sum	(Optional) Displays SHA256 checksum for a file
sha512sum	(Optional) Displays SHA512 checksum for a file
__readonly__	(Optional) Read only
file_content	(Optional) uri file content buffer string
file_content_cksum	(Optional) uri file content checksum
file_content_md5sum	(Optional) uri file content md5sum
file_content_sha256sum	(Optional) uri file content sha256sum
file_content_sha512sum	(Optional) uri file content sha512sum

Command Mode

/exec

show fips status

show fips status [ __readonly__ { operation_status <o_status> } { mode_state <m_state> } [ TABLE_sessions <lc_num> <lc_status> ] ]

Syntax Description


show	Show running system information
fips	Show if FIPS mode is enabled or disabled
status	Whether FIPS mode is enabled or disabled
__readonly__	(Optional)
operation_status	(Optional) run-time information about fips
o_status	(Optional) operational status of fips
mode_state	(Optional) mode state
m_state	(Optional) fips or non-fips state
TABLE_sessions	(Optional) all lc status
lc_num	(Optional) the lc number
lc_status	(Optional) the lc status

Command Mode

/exec

show flogi auto-area-list

Syntax Description


show	Show running system information
flogi	Show information about FLOGI
auto-area-list	Show list of ouis that are allocated area.

Command Mode

/exec

show flogi database

show flogi database [ { details | [ fcid <fcid0> ] [ details ] | [ interface <if0> ] [ details ] | [ vsan <i1> ] [ details ] } ]

Syntax Description


show	Show running system information
flogi	Show information about FLOGI
database	Show information about FLOGI sessions
details	(Optional) details: shows fcid allocation details
fcid	(Optional) fcid: enter the fcid to be matched
fcid0	(Optional) Enter fcid
details	(Optional) details: shows fcid allocation details
interface	(Optional) interface id: enter the interface id of the port
if0	(Optional) Enter interface id
details	(Optional) details: shows fcid allocation details
vsan	(Optional) vsan id:Enter the vsan number
i1	(Optional) Enter vsan
details	(Optional) details: shows fcid allocation details

Command Mode

/exec

show flow cache

show flow cache [ ipv4 | ipv6 | ce ] [ __readonly__ TABLE_flow_cache <flow-type> <source-ip> <destination-ip> <bridge-domain-id> <source-port> <destination-port> <protocol> <ipv6-flowlabel> <byte-count> <packet-count> <tcp-flags> <tos> <if-id> <flow-start> <flow-end> <source-mac> <destination-mac> <ether-type> ]

Syntax Description


show	Show running system information
flow	Show NetFlow information
cache	Show NetFlow Exporter Cache
ipv4	(Optional) Show ipv4 cache entries
ipv6	(Optional) Show ipv6 cache entries
ce	(Optional) Show ce cache entries
__readonly__	(Optional)
TABLE_flow_cache	(Optional) The XML flow cache table
flow-type	(Optional) Flow type - v4,v6 or MAC
source-ip	(Optional) Source IP
destination-ip	(Optional) Destination IP
bridge-domain-id	(Optional) Bridge Domain ID
source-port	(Optional) Source Port
destination-port	(Optional) Destination Port
protocol	(Optional) Protocol
ipv6-flowlabel	(Optional) Ipv6 flowlabel
byte-count	(Optional) Byte Count
packet-count	(Optional) Packet Count
tcp-flags	(Optional) TCP Flags
tos	(Optional) TOS
if-id	(Optional) IF ID
flow-start	(Optional) Flow Start Time
flow-end	(Optional) Flow End Time
source-mac	(Optional) Source MAC
destination-mac	(Optional) Destination MAC
ether-type	(Optional) Ether Type

Command Mode

/exec

show flow cache

show flow cache [ ipv4 | ipv6 | ce ] [ __readonly__ [ { TABLE_flow_cache <flow-cache-index> [ <flow-type> ] [ <source-ip> ] [ <destination-ip> ] [ <source-mac> ] [ <destination-mac> ] [ <bridge-domain-id> ] [ <ether-type> ] [ <source-port> ] [ <destination-port> ] [ <protocol> ] [ <ipv6-flowlabel> ] [ <byte-count> ] [ <packet-count> ] [ <tcp-flags> ] [ <tos> ] [ <if-id> ] [ <output-if-id> ] [ <flow-start> ] [ <flow-end> ] [ <profile> ] } ] ]

Syntax Description


show	Show running system information
flow	Show NetFlow information
cache	Show NetFlow Exporter Cache
ipv4	(Optional) Show ipv4 cache entries
ipv6	(Optional) Show ipv6 cache entries
ce	(Optional) Show ce cache entries
__readonly__	(Optional)
TABLE_flow_cache	(Optional) The XML flow cache table
flow-cache-index	(Optional) Flow Index
flow-type	(Optional) Flow type - v4,v6 or MAC
source-ip	(Optional) Source IP
destination-ip	(Optional) Destination IP
source-mac	(Optional) Source MAC
destination-mac	(Optional) Destination MAC
bridge-domain-id	(Optional) Bridge Domain ID
ether-type	(Optional) Ether Type
source-port	(Optional) Source Port
destination-port	(Optional) Destination Port
protocol	(Optional) Protocol
ipv6-flowlabel	(Optional) Ipv6 flowlabel
byte-count	(Optional) Byte Count
packet-count	(Optional) Packet Count
tcp-flags	(Optional) TCP Flags
tos	(Optional) TOS
if-id	(Optional) IF ID
output-if-id	(Optional) OUTPUT IF ID
flow-start	(Optional) Flow Start Time
flow-end	(Optional) Flow End Time
profile	(Optional) Profile

Command Mode

/exec

show flow event

show flow event [ name ] [ { <eventname> } ] [ __readonly__ [ { TABLE_nfm_event <event> [ <description> ] <use_count> [ { TABLE_nfm_group <events> [ <buffer_drops> ] [ <fwd_drops> ] [ <acl_drops> ] [ <flow_count> ] [ <latency_threshold> ] [ <latency_unit> ] [ <latency_flow_count> ] [ <rcv_window_zero> ] [ <ip_df> ] [ <tos_value> ] [ <ttl_value> ] [ <max_burst_value> ] } ] } ] ]

Syntax Description


show	Show running system information
flow	Show Analytics information
event	Show Event Configuration
name	(Optional) Show the configuration for a specific Event
eventname	(Optional) Specify a event
__readonly__	(Optional)
TABLE_nfm_event	(Optional) Event Table
event	(Optional) Analytics event
description	(Optional) Description of Analytics event
use_count	(Optional) Use count of Analytics event
TABLE_nfm_group	(Optional)
events	(Optional) Drop or Latency type of events
buffer_drops	(Optional) Capture buffer-drops
fwd_drops	(Optional) Capture fwd-drops
acl_drops	(Optional) Capture acl-drops
flow_count	(Optional) Drop type flow count
latency_threshold	(Optional) Latency threshold value
latency_unit	(Optional) Unit for latency threshold measurement
latency_flow_count	(Optional) Latency type flow count
rcv_window_zero	(Optional) Capture Receive Window Zero events
ip_df	(Optional) Capture IpDf events
tos_value	(Optional) Type of Service value
ttl_value	(Optional) Time To Live value
max_burst_value	(Optional) Max Burst value

Command Mode

/exec

show flow exporter

show flow exporter [ name ] [ <exporter> ] [ __readonly__ { TABLE_flow_exporter <exporter> [ <description> ] [ <dest_intf> ] [ <dest> ] [ <vrf> ] [ <vrf_id> ] [ <vrf_resolved> ] [ <dest_udp> ] [ <events_dest_udp> ] [ <source_intf> ] [ <source_ip> ] [ <dscp> ] [ <exp_vers> ] [ <seqnum> ] [ <samp_table_to> ] [ <if_table_to> ] [ <stats_to> ] [ <temp_to> ] [ <rec_sent> ] [ <temp_sent> ] [ <pkts_sent> ] [ <bytes_sent> ] [ <dest_unreach> ] [ <buff_events> ] [ <pkts_drop_no_route> ] [ <pkts_drop_other> ] [ <pkts_drop_lc_rp> ] [ <pkts_drop_op_drops> ] [ <time_last_cleared> ] } ]

Syntax Description


show	Show running system information
flow	Show NetFlow information
exporter	Show NetFlow Exporter Configuration and Statistics
name	(Optional) Show a specific Flow Exporter
exporter	(Optional) Specify an exporter
__readonly__	(Optional)
TABLE_flow_exporter	(Optional)
exporter	(Optional)
description	(Optional)
dest_intf	(Optional)
dest	(Optional)
vrf	(Optional)
vrf_id	(Optional)
vrf_resolved	(Optional)
dest_udp	(Optional)
events_dest_udp	(Optional)
source_intf	(Optional)
source_ip	(Optional)
dscp	(Optional)
seqnum	(Optional)
exp_vers	(Optional)
samp_table_to	(Optional)
if_table_to	(Optional)
stats_to	(Optional)
temp_to	(Optional)
rec_sent	(Optional)
temp_sent	(Optional)
pkts_sent	(Optional)
bytes_sent	(Optional)
dest_unreach	(Optional)
buff_events	(Optional)
pkts_drop_no_route	(Optional)
pkts_drop_other	(Optional)
pkts_drop_lc_rp	(Optional)
pkts_drop_op_drops	(Optional)
time_last_cleared	(Optional)

Command Mode

/exec

show flow filter

show flow filter [ __readonly__ [ { TABLE_flow_filter <name> <ipv4acl> <ipv6acl> } ] ]

Syntax Description


show	Show running system information
flow	Show Analytics information
filter	Show filter Configuration
__readonly__	(Optional)
TABLE_flow_filter	(Optional) flow filter data
name	(Optional) Filter Name
ipv4acl	(Optional) IPv4 ACL
ipv6acl	(Optional) IPv4 ACL

Command Mode

/exec

show flow interface

show flow { interface [ <intf> ] | vlan [ <vlan> ] } [ __readonly__ [ { TABLE_flow_interface [ <intf_name> ] [ <vlan_id> ] [ <filter> ] [ <v4in_mon_name> ] [ <v4in_direction> ] [ <v4in_profile_id> ] [ <v6in_mon_name> ] [ <v6in_direction> ] [ <v6in_profile_id> ] [ <l2in_mon_name> ] [ <l2in_direction> ] [ <l2in_profile_id> ] } ] ]

Syntax Description


show	Show running system information
flow	Show NetFlow information
interface	Flow interface information
intf	(Optional) Interface
vlan	Flow vlan information
vlan	(Optional) Vlan number
__readonly__	(Optional)
TABLE_flow_interface	(Optional) flow interface data
intf_name	(Optional) Interface
vlan_id	(Optional) VLAN ID
filter	(Optional) Filter name
v4in_mon_name	(Optional) IPv4 Input monitor name
v4in_direction	(Optional) IPv4 Input direction
v4in_profile_id	(Optional) IPv4 Input profile id
v6in_mon_name	(Optional) IPv6 Input monitor name
v6in_direction	(Optional) IPv6 Input direction
v6in_profile_id	(Optional) IPv6 Input profile id
l2in_mon_name	(Optional) l2 Input monitor name
l2in_direction	(Optional) l2 Input direction
l2in_profile_id	(Optional) l2 Input profile id

Command Mode

/exec

show flow monitor

show flow monitor [ name ] [ <monitor> [ cache [ detailed ] ] ] [ __readonly__ [ { TABLE_flow_monitor <monitor> [ <description> ] <use_count> [ <record> ] [ <bucket_id> ] [ <exporter1> ] [ <exporter2> ] [ <src_addr> ] [ <dest_addr> ] [ <direction> ] [ <pkt_count> ] [ <byte_count> ] } ] ]

Syntax Description


show	Show running system information
flow	Show NetFlow information
monitor	Show Monitor Configuration
name	(Optional) Show a specific Flow Monitor
monitor	(Optional) Specify a monitor
cache	(Optional) Flow monitor cache contents
detailed	(Optional) Show the entire cache contents
__readonly__	(Optional)
TABLE_flow_monitor	(Optional)
monitor	(Optional)
use_count	(Optional)
description	(Optional)
record	(Optional)
exporter1	(Optional)
exporter2	(Optional)
bucket_id	(Optional)
src_addr	(Optional)
dest_addr	(Optional)
direction	(Optional)
pkt_count	(Optional)
byte_count	(Optional)

Command Mode

/exec

show flow profile

show flow profile [ <profile> ] [ __readonly__ [ { TABLE_flow_profile <name> [ <desc> ] <number-of-users> <export-intvl> <source-port> <packet-id-shift> <burst-intvl-shift> <mtu> [ <guess-threshold-lo> ] [ <guess-threshold-hi> ] [ { TABLE_payload_bin <payload-bin-num> <payload-bin-lo> <payload-bin-hi> } ] [ { TABLE_tcpopthdr_bin <tcpopthdr-bin-num> <tcpopthdr-bin-lo> <tcpopthdr-bin-hi> } ] [ { TABLE_rcvwinsize_bin <rcvwinsize-bin-num> <rcvwinsize-bin-lo> <rcvwinsize-bin-hi> } ] } ] ]

Syntax Description


show	Show running system information
flow	Show Analytics information
profile	Show profile Configuration
profile	(Optional) Specify a profile
__readonly__	(Optional)
TABLE_flow_profile	(Optional) HW flow profile
name	(Optional) HW profile name
desc	(Optional) Description of HW profile
number-of-users	(Optional) No. of users
export-intvl	(Optional) Export Interval
source-port	(Optional) Source Port
packet-id-shift	(Optional) IP Packet ID Shift
burst-intvl-shift	(Optional) Burst Interval Shift
mtu	(Optional) MTU
guess-threshold-lo	(Optional) Sequence Number Guess Threshold Lo
guess-threshold-hi	(Optional) Sequence Number Guess Threshold Hi
TABLE_payload_bin	(Optional) Payload Bin
payload-bin-num	(Optional) Bin Number
payload-bin-lo	(Optional) Bin Lo
payload-bin-hi	(Optional) Bin Hi
TABLE_tcpopthdr_bin	(Optional) TCP Opt Hdr Bin
tcpopthdr-bin-num	(Optional) Bin Number
tcpopthdr-bin-lo	(Optional) Bin Lo
tcpopthdr-bin-hi	(Optional) Bin Hi
TABLE_rcvwinsize_bin	(Optional) Receive Windows Size Bin
rcvwinsize-bin-num	(Optional) Bin Number
rcvwinsize-bin-lo	(Optional) Bin Lo
rcvwinsize-bin-hi	(Optional) Bin Hi

Command Mode

/exec

show flow record

show flow record [ name ] [ { <record> } | { netflow-original } | { netflow { protocol-port | layer2-switched { input } | { ipv4 | ipv6 | l2 } { original-input } } } ] [ __readonly__ [ { TABLE_flow_record <record> [ <description> ] <use_count> <template> [ <match_ip_src> ] [ <match_ip_dst> ] [ <match_proto> ] [ <match_tos> ] [ <match_l4_src> ] [ <match_l4_dst> ] [ <match_ingress> ] [ <match_egress> ] [ <match_src_as_peer> ] [ <match_dst_as_peer> ] [ <match_ipv6_src> ] [ <match_ipv6_dst> ] [ <match_ipv6_flow> ] [ <match_ipv6_option> ] [ <match_ipv6_traffic> ] [ <match_l2_src> ] [ <match_l2_dst> ] [ <match_l2_src_vlan> ] [ <match_l2_dst_vlan> ] [ <match_l2_1q> ] [ <match_l2_cos> ] [ <match_l2_etype> ] [ <match_flow_dir_match> ] [ <match_ipv4v6_src> ] [ <match_ipv4v6_dst> ] [ <collect_src_as> ] [ <collect_dst_as> ] [ <collect_src_as_peer> ] [ <collect_dst_as_peer> ] [ <collect_fwd_status> ] [ <collect_ipv4_next_hop> ] [ <collect_ipv4_bgp_next> ] [ <collect_ipv6_next_hop> ] [ <collect_ipv6_bgp_next> ] [ <collect_tcp_flags> ] [ <collect_flow_dir> ] [ <collect_bytes> ] [ <collect_bytes_long> ] [ <collect_packets> ] [ <collect_packets_long> ] [ <collect_time_first> ] [ <collect_time_last> ] [ <collect_ingress_coll> ] [ <collect_egress_coll> ] [ <collect_sampler_id> ] [ <collect_ip_ver> ] [ <collect_packet_disp> ] } ] ]

Syntax Description


show	Show running system information
flow	Show NetFlow information
record	Show Record Configuration
name	(Optional) Show the configuration for a specific Flow Record
record	(Optional) Specify a record
netflow-original	(Optional) Traditional IPv4 input NetFlow with origin ASs
netflow	(Optional) Traditional NetFlow collection schemes
ipv4	(Optional) IPv4 collection schemes
ipv6	(Optional) IPv6 collection schemes
l2	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
layer2-switched	(Optional) Layer2-Switched collection schemes
original-input	(Optional) Input NetFlow
input	(Optional) Input NetFlow
protocol-port	(Optional) Protocol and Ports aggregation scheme
__readonly__	(Optional)
TABLE_flow_record	(Optional) flow record data
record	(Optional)
description	(Optional)
use_count	(Optional)
template	(Optional)
match_ip_src	(Optional)
match_ip_dst	(Optional)
match_proto	(Optional)
match_tos	(Optional)
match_l4_src	(Optional)
match_l4_dst	(Optional)
match_ingress	(Optional)
match_egress	(Optional)
match_src_as_peer	(Optional)
match_dst_as_peer	(Optional)
match_ipv6_src	(Optional)
match_ipv6_dst	(Optional)
match_ipv6_flow	(Optional)
match_ipv6_option	(Optional)
match_ipv6_traffic	(Optional)
match_l2_src	(Optional)
match_l2_dst	(Optional)
match_l2_src_vlan	(Optional)
match_l2_dst_vlan	(Optional)
match_l2_1q	(Optional)
match_l2_cos	(Optional)
match_l2_etype	(Optional)
match_flow_dir_match	(Optional)
match_ipv4v6_src	(Optional)
match_ipv4v6_dst	(Optional)
collect_src_as	(Optional)
collect_dst_as	(Optional)
collect_src_as_peer	(Optional)
collect_dst_as_peer	(Optional)
collect_fwd_status	(Optional)
collect_ipv4_next_hop	(Optional)
collect_ipv4_bgp_next	(Optional)
collect_ipv6_next_hop	(Optional)
collect_ipv6_bgp_next	(Optional)
collect_tcp_flags	(Optional)
collect_flow_dir	(Optional)
collect_bytes	(Optional)
collect_bytes_long	(Optional)
collect_packets	(Optional)
collect_packets_long	(Optional)
collect_time_first	(Optional)
collect_time_last	(Optional)
collect_ingress_coll	(Optional)
collect_egress_coll	(Optional)
collect_sampler_id	(Optional)
collect_ip_ver	(Optional)
collect_packet_disp	(Optional)

Command Mode

/exec

show flow rtp

show flow rtp { errors { active | history } | details } [ ipv4 | ipv6 ] [ __readonly__ [ <flow-timeout> ] [ { TABLE_flow_rtp <flow-rtp-index> [ <flow-type> ] [ <source-ip> ] [ <destination-ip> ] [ <bridge-domain-id> ] [ <source-port> ] [ <destination-port> ] [ <protocol> ] [ <packet-count> ] [ <bytes-per-sec> ] [ <bits-per-sec> ] [ <start-time> ] [ <if-name> ] [ <vrf-name> ] [ { TABLE_flow_rtp_errors <loss-start> [ <loss-end> ] [ <packet-loss> ] } ] } ] ]

Syntax Description


show	Show running system information
flow	Show NetFlow information
rtp	Real-time Transport Protocol
errors	Show NetFlow RTP flows error information
active	Show RTP flows with active losses
history	Show RTP flows with loss history
details	Show NetFlow RTP detailed information
ipv4	(Optional) Show ipv4 RTP entries
ipv6	(Optional) Show ipv6 RTP entries
__readonly__	(Optional)
TABLE_flow_rtp	(Optional) The XML flow rtp table
flow-timeout	(Optional) Flow Timeout
flow-rtp-index	(Optional) Flow RTP Index
flow-type	(Optional) Flow type - v4,v6
source-ip	(Optional) Source IP
destination-ip	(Optional) Destination IP
bridge-domain-id	(Optional) Bridge Domain ID
source-port	(Optional) Source Port
destination-port	(Optional) Destination Port
protocol	(Optional) Protocol
packet-count	(Optional) Packet Count
bytes-per-sec	(Optional) Bytes Per Second
bits-per-sec	(Optional) Bits Per Second
start-time	(Optional) Flow Start Time
if-name	(Optional) IF/Vlan
vrf-name	(Optional) VRF
TABLE_flow_rtp_errors	(Optional) The XML flow rtp errors table
loss-start	(Optional) Loss Start Time
loss-end	(Optional) Loss End Time
packet-loss	(Optional) Packet loss

Command Mode

/exec

show flow rtp timeout

show flow rtp timeout [ __readonly__ { <flush_cache_to> } ]

Syntax Description


show	Show running system information
flow	Show NetFlow information
rtp	Real-time Transport Protocol
timeout	Show NetFlow RTP flow error monitoring timeout values
__readonly__	(Optional)
flush_cache_to	(Optional)

Command Mode

/exec

show flow system

show flow system [ __readonly__ <system_exporter_id> [ <switch_latency> ] [ { TABLE_flow_interface [ <intf_name> ] [ <exporter_id> ] [ <profile_name> ] [ <v4in_mon_name> ] [ <v4in_direction> ] [ <v6in_mon_name> ] [ <v6in_direction> ] [ <filter_name> ] [ <event_name> ] [ <ipv4_hit> ] [ <ipv4_create> ] [ <ipv6_hit> ] [ <ipv6_create> ] [ <ce_hit> ] [ <ce_create> ] [ <packets_seen> ] [ <skip_collect> ] [ <export_count> ] } ] ]

Syntax Description


show	Show running system information
flow	Show Analytics information
system	Show system Configuration
__readonly__	(Optional)
system_exporter_id	(Optional) System Exporter ID
switch_latency	(Optional) System Switch Latency Enabled
TABLE_flow_interface	(Optional) flow interface data
intf_name	(Optional) Interface
exporter_id	(Optional) Exporter ID
profile_name	(Optional) HW Profile Name
v4in_mon_name	(Optional) IPv4 Input monitor name
v4in_direction	(Optional) IPv4 Input direction
v6in_mon_name	(Optional) IPv6 Input monitor name
v6in_direction	(Optional) IPv6 Input direction
filter_name	(Optional) User Filter Name
event_name	(Optional) User Event name
ipv4_hit	(Optional) Number of packets that hit an Ipv4 hash entry
ipv4_create	(Optional) Number of packets that created a new Ipv4 hash entry
ipv6_hit	(Optional) Number of packets that hit an Ipv6 hash entry
ipv6_create	(Optional) Number of packets that created a new Ipv6 hash entry
ce_hit	(Optional) Number of packets that hit an ce hash entry
ce_create	(Optional) Number of packets that created a new ce hash entry
packets_seen	(Optional) Number of packets seen
skip_collect	(Optional) Number of packets that skipped the analytics collect
export_count	(Optional) Number of Analytics packets exported

Command Mode

/exec

show flow timeout

show flow timeout [ __readonly__ [ <active_to> ] [ <inactive_to> ] [ <fast_to> ] [ <th_pkts> ] [ <agg_age_to> ] <flush_cache_to> ]

Syntax Description


show	Show running system information
flow	Show NetFlow information
timeout	Show NetFlow flow cache timeout values
__readonly__	(Optional)
active_to	(Optional)
inactive_to	(Optional)
fast_to	(Optional)
th_pkts	(Optional)
agg_age_to	(Optional)
flush_cache_to	(Optional)

Command Mode

/exec

show flow tracer

show flow tracer [ __readonly__ [ { TABLE_flow_tracer <flow-tracer-index> [ <source-ip> ] [ <destination-ip> ] [ <bridge-domain-id> ] [ <source-port> ] [ <destination-port> ] [ <protocol> ] [ <packet-count> ] [ <if-name> ] [ <fwd-drop> ] [ <rpf-fail> ] [ <policing-drop> ] [ <ids-drop> ] [ <policy-drop> ] [ <buffer-drop> ] } ] ]

Syntax Description


show	Show running system information
flow	Show NetFlow information
tracer	Show packet tracer information
__readonly__	(Optional)
TABLE_flow_tracer	(Optional)
flow-tracer-index	(Optional) Flow Index
source-ip	(Optional) Source IP
destination-ip	(Optional) Destination IP
bridge-domain-id	(Optional) Bridge Domain ID
source-port	(Optional) Source Port
destination-port	(Optional) Destination Port
protocol	(Optional) Protocol
packet-count	(Optional) Packet Count
if-name	(Optional) Ingress Interface
fwd-drop	(Optional) Fowarding Drops
rpf-fail	(Optional) RPF Port Sec Failures
policing-drop	(Optional) Policing Drops
ids-drop	(Optional) Ids Drops
policy-drop	(Optional) ACL Drops
buffer-drop	(Optional) Buffer Drops

Command Mode

/exec

show flow vrf

show flow vrf [ <vrf_name> ] [ __readonly__ [ { TABLE_flow_vrf [ <vrf_name> ] [ <v4in_mon_name> ] [ <v4in_direction> ] [ <v6in_mon_name> ] [ <v6in_direction> ] [ <filter_name> ] } ] ]

Syntax Description


show	Show running system information
flow	Show Analytics information
vrf	Show VRF Configuration
vrf_name	(Optional) Specify a vrf
__readonly__	(Optional)
TABLE_flow_vrf	(Optional) flow vrf data
vrf_name	(Optional) VRF name
v4in_mon_name	(Optional) IPv4 Input monitor name
v4in_direction	(Optional) IPv4 Input direction
v6in_mon_name	(Optional) IPv6 Input monitor name
v6in_direction	(Optional) IPv6 Input direction
filter_name	(Optional) User Filter Name

Command Mode

/exec

show forwarding

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } | table <table_id> ] [ ipv4 ] [ route | rnhdb ] [ recursive ] [ summary | [ [ detail | platform | partial | ipsg ] [ max-display-count <display_count> ] ] | [ <prefix> [ longer-prefixes ] [ detail | platform ] | <address> [ detail | platform ] |

Syntax Description


show
forwarding	display fib information
vrf	(Optional) display info per VRF
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
vrf-all	(Optional) Display information for all VRFs
table	(Optional) display info per vpn-id
table_id	(Optional) table id in hex
ipv4	(Optional) ipv4
route	(Optional) display IP routing table
ipsg	(Optional) display IPv4 IPSG routes
rnhdb	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
recursive	(Optional) display routes with recursive next hops
partial	(Optional) display routes with partial ECMPs
summary	(Optional) display route counts
prefix	(Optional) display single exact match route
longer-prefixes	(Optional) display longer prefixes
address	(Optional) display single longest match route
detail	(Optional) show detailed information about the routes
platform	(Optional) one command to show pi and pd info together
max-display-count	(Optional) displays max # of routes
display_count	(Optional) count

Command Mode

/exec

show forwarding adjacency

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ipv4 ] adjacency [ mpls ] [ lisp ] [ nve ] [ <aif> ] [ <anh> ] [ detail | stats | platform ] [ module <module> ] [ __readonly__ [ <adj-count> ] [ TABLE_adj { [ <fec> ] [ <nexthop> ] [ <intf> ] [ <rewinfo> ] [ <interface> ] [ <bgp_rnh> ] [ <bgp_orig_as> ] [ <bgp_peer_as> ] [ <pkts> ] [ <bytes> ] [ <exp> ] [ <src_addr> ] [ <dest_addr> ] [ <lisp_flags> ] [ <lisp_inst_id> ] [ <pltfm_key> ] [ <hh> ] [ <refcount> ] } ] [ TABLE_ip_adjacency { [ <nh> ] [ <rwinfo> ] [ <intf> ] [ <intf_idx> ] [ <hhandle> ] [ <refcnt> ] [ <flags> ] [ <holder> ] [ <pbr_cnt> ] [ <wccp_cnt> ] [ <rewrite-p> ] [ TABLE_index { [ <hw_adj> ] [ <cmn-idx> ] [ <lif> ] [ <buf-idx> ] } ] } ] ]

Syntax Description


show
forwarding	display fib information
ipv4	(Optional) ipv4
adjacency	display adjacency information
platform	(Optional) one command to show pi and pd info together
vrf	(Optional) display info per VRF
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
vrf-all	(Optional) Display information for all VRFs
mpls	(Optional) mpls adjacency information
lisp	(Optional) LISP adjacency information
nve	(Optional) VxLAN tunnel adjacency information
aif	(Optional) adjacency output interface
anh	(Optional) adjacency next hop
detail	(Optional) detail
stats	(Optional) adjacency statistics
module	(Optional) slot
module	(Optional) slot number
__readonly__	(Optional)
adj-count	(Optional) total adj count
TABLE_adj	(Optional) Table Adjacency
fec	(Optional) FEC info
nexthop	(Optional) next hop address
intf	(Optional) output interface
rewinfo	(Optional) rewrite information
interface	(Optional) output interface
bgp_rnh	(Optional) next hop address
bgp_orig_as	(Optional) bgp orig as
bgp_peer_as	(Optional) bgp peer as
exp	(Optional) exp mapping
pkts	(Optional) packet stats
bytes	(Optional) bytes stats
src_addr	(Optional) src address
dest_addr	(Optional) dest address
lisp_flags	(Optional) lisp flags
lisp_inst_id	(Optional) lisp instance id
pltfm_key	(Optional) platform key
hh	(Optional) Hardware Handle
refcount	(Optional) reference count
TABLE_ip_adjacency	(Optional) Table ip adjacency
nh	(Optional) next hop address
rwinfo	(Optional) rewrite information
intf	(Optional) output interface
intf_idx	(Optional) Interface index
hhandle	(Optional) Hw Handle
refcnt	(Optional) reference count
flags	(Optional) Adjacency flags
holder	(Optional) Holder bitmap
pbr_cnt	(Optional) PBR count
wccp_cnt	(Optional) WCCP count
rewrite-p	(Optional) Rewrite pointer
TABLE_index	(Optional) HW index table
hw_adj	(Optional) v4 adj hw index
cmn-idx	(Optional) CMN Index
lif	(Optional) LIF
buf-idx	(Optional) Buffer index

Command Mode

/exec

show forwarding consistency-fretta l2

show forwarding consistency-fretta l2 <module>

Syntax Description


show	Show running system information
forwarding	Forwarding information
consistency-fretta	consistency
l2	Verify l2 mac programming in the hardware
module	Enter module number

Command Mode

/exec

show forwarding distribution clients

show forwarding distribution clients [ __readonly__ <id><pid><name><shms><shme><shmn> ]

Syntax Description


show
forwarding	Display Forwarding Information
distribution	fib distribution info
clients	unicast client information
__readonly__	(Optional)

Command Mode

/exec

show forwarding distribution evpn storm-control

show forwarding distribution evpn storm-control [ __readonly__ <header> [ TABLE_storm_control_level <type> <status> <level> ] [ TABLE_interface_bandwidth <interface> <type> <bandwidth> ] [ TABLE_total_bandwidth <type> <bandwidth> ] ]

Syntax Description


show	Show running system information
forwarding	forwarding information
distribution	fib distribution info
evpn	evpn distribution info
storm-control	storm-control information
__readonly__	(Optional)
header	(Optional) Header
TABLE_storm_control_level	(Optional) Table storm control level
type	(Optional) Traffic type
status	(Optional) Status
level	(Optional) Level
TABLE_interface_bandwidth	(Optional) Table interface bandwidth
interface	(Optional) Interface
type	(Optional) Type
bandwidth	(Optional) Bandwidth
TABLE_total_bandwidth	(Optional) Table total bandwidth
type	(Optional) Type
bandwidth	(Optional) Bandwidth

Command Mode

/exec

show forwarding distribution fib-state

show forwarding distribution fib-state [ __readonly__ <slot> <state><ttc><tprc><tv4ac><tv6ac> { TABLE_fib_state <tid><tafi><prc><pc><tname> } ]

Syntax Description


show
forwarding	Display Forwarding Information
distribution	fib distribution info
fib-state	unicast fib state info
__readonly__	(Optional)
slot	(Optional) slot number
TABLE_fib_state	(Optional) fib-state table

Command Mode

/exec

show forwarding distribution ip igmp snooping

show forwarding distribution ip igmp snooping [ vlan <vlan-id> [ group [ <grpaddr> | <mac-grpaddr> ] [ source <srcaddr> ] ] ] [ detail ] [ __readonly__ <refcount> <oiflist_id> <last_oiflist_id> <ftag-id> ]

Syntax Description


show
forwarding	Display Forwarding Information
distribution	FIB distribution information
ip	IPV4 information
igmp	MFDM IGMP information
snooping	L2 mcast snooping related information
vlan	(Optional) Info specific to a vlan
vlan-id	(Optional) Vlan id value
group	(Optional) Group specific information
grpaddr	(Optional) Group address
mac-grpaddr	(Optional) Group MAC address
source	(Optional) (G,S) specific information
srcaddr	(Optional) Source address
detail	(Optional) Detailed display
__readonly__	(Optional)
refcount	(Optional) Reference Count
oiflist_id	(Optional) OIF list Identifier
last_oiflist_id	(Optional) Last OIF list Identifier
ftag-id	(Optional) ftag Id

Command Mode

/exec

show forwarding distribution ipv6 multicast route

show forwarding distribution ipv6 multicast route [ table <table_id> | vrf { <vrf-name> | all } ] [ [ group { <group> } [ source { <source> } ] ] | summary ] [ __readonly__ TABLE_vrf [ <vrf-name> ] [ <table-name> ] [ <table-id> ] [ <total-num-groups> ] [ TABLE_route_summary [ <vrf-name> ] [ <total-num-routes> ] [ <num-star-g-route> ] [ <num-sg-route> ] [ <num-star-g-prfx> ] [ <num-group-count> ] ] [ TABLE_one_route [ <source-addrs> ] [ <source-len> ] [ <group-addrs> ] [ <group-len> ] [ <df-ordinal> ] [ <rpf-intf> ] [ <flags> ] [ <upstream-addrs> ] [ <stats-pkts> ] [ <stats-bytes> ] [ <oif-count> ] [ <oiflist-index> ] [ TABLE_oif [ <oif-name> ] [ <mti-src-intf> ] [ <mti-grp-ip> ] [ <mti-src-ip> ] ] ] ]

Syntax Description


show
forwarding	Display Forwarding Information
distribution	display fib distribution information
ipv6	IPV6 related information
multicast	display IPv6 multicast information
route	display routing table
vrf	(Optional) display routes for a specific VRF
vrf-name	(Optional) VRF name
all	(Optional) Display information for all VRFs
table	(Optional) table
table_id	(Optional) table number
group	(Optional) Multicast IPv6 Group Address
source	(Optional) Multicast IPv6 Source Address
summary	(Optional) display route counts
__readonly__	(Optional)
TABLE_vrf	(Optional)
vrf-name	(Optional)
table-name	(Optional)
table-id	(Optional)
total-num-groups	(Optional)
TABLE_route_summary	(Optional)
total-num-routes	(Optional)
num-star-g-route	(Optional)
num-sg-route	(Optional)
num-star-g-prfx	(Optional)
num-group-count	(Optional)
TABLE_one_route	(Optional)
source-addrs	(Optional)
source-len	(Optional)
group-addrs	(Optional)
group-len	(Optional)
df-ordinal	(Optional)
rpf-intf	(Optional)
flags	(Optional)
stats-pkts	(Optional)
stats-bytes	(Optional)
oif-count	(Optional)
oiflist-index	(Optional)
TABLE_oif	(Optional)
oif-name	(Optional)
mti-src-intf	(Optional)
mti-grp-ip	(Optional)
mti-src-ip	(Optional)

Command Mode

/exec

show forwarding distribution l2 multicast

show forwarding distribution l2 multicast [ ip-based | mac-based ] [ [ vni <vni-id> ] | [ vlan <vlan-id> [ { group { <grpaddr> | <v6grpaddr> } [ source { <srcaddr> | <v6srcaddr> } ] } | destination-mac <dmac> ] ] ] [ summary ] [ __readonly__ [ TABLE_sum [ <mode> ] [ <num_vlan> ] [ <num_starg> ] [ <num_sg> ] [ <num_aggstarg> ] [ TABLE_sum_info [ <ftag_id> ] [ <vlan_id> ] [ <routable_flag> ] [ <v6_routable_flag> ] [ <num_starg> ] [ <num_sg> ] [ <num_aggstarg> ] [ <total_route> ] ] ] [ TABLE_route [ <vlan> ] [ <grp_str> ] [ <v6grp_str> ] [ <src_str> ] [ <v6src_str> ] [ <grp_mac> ] [ <src_mac> ] [ TABLE_oif [ <oiflist_id> ] [ <refcount> ] [ <l3_usage> ] [ <plt_index> ] [ <num_oif> ] [ <oif_name> ] [ <flags> ] [ <dvif> ] ] ] ]

Syntax Description


show
forwarding	Display Forwarding Information
distribution	FIB distribution information
l2	L2 information
multicast	L2 multicast information
ip-based	(Optional) IPv4 based
mac-based	(Optional) MAC based
vlan	(Optional) Info specific to a vlan
vlan-id	(Optional) Vlan id value
vni	(Optional) Info specific to a vni
vni-id	(Optional) Vni id value
group	(Optional) Group specific information
grpaddr	(Optional) Group address
source	(Optional) (G,S) specific information
srcaddr	(Optional) Source address
destination-mac	(Optional) Destination MAC specific information
dmac	(Optional) Destination MAC address
summary	(Optional) display route counts
__readonly__	(Optional)
TABLE_sum	(Optional)
mode	(Optional) Mode
num_vlan	(Optional) Num of VLAN
num_starg	(Optional) Num of Starg routes
num_sg	(Optional) Num of SG routes
num_aggstarg	(Optional) Num of Aggregated Starg routes
TABLE_sum_info	(Optional)
vlan_id	(Optional) vlan id
ftag_id	(Optional) ftag id
routable_flag	(Optional) Routable flag
v6_routable_flag	(Optional) Routable flag
num_starg	(Optional) Num of starg routes
num_sg	(Optional) Num of sg routes
num_aggstarg	(Optional) Num of Aggregated Starg routes
total_route	(Optional) Total Routes
TABLE_route	(Optional)
vlan	(Optional) vlan
grp_str	(Optional) Group Address
v6grp_str	(Optional) v6 Group address
src_str	(Optional) Source Address
v6src_str	(Optional) v6 Group address
grp_mac	(Optional) Group Mac
src_mac	(Optional) Source Mac
TABLE_oif	(Optional)
oiflist_id	(Optional) oiflist index
refcount	(Optional) reference count
l3_usage	(Optional) l3 usage
plt_index	(Optional) platform index
num_oif	(Optional) Num of outging interface
oif_name	(Optional) Oif details
flags	(Optional)
dvif	(Optional)

Command Mode

/exec

show forwarding distribution lisp counters

show forwarding distribution lisp counters [ __readonly__ <count> ]

Syntax Description


show
forwarding	Display Forwarding Information
distribution	fib distribution information
lisp	for lisp application
counters	counters
__readonly__	(Optional)
count	(Optional) count

Command Mode

/exec

show forwarding distribution lisp vrf enabled

show forwarding distribution lisp vrf enabled [ __readonly__ { TABLE_lisp_vrf_enabled <vrf> <lisp_enabled> <req_id> <operation> } ]

Syntax Description


show
forwarding	Display Forwarding Information
distribution	fib distribution information
lisp	for lisp application
vrf	vrf
enabled	enabled
__readonly__	(Optional)
TABLE_lisp_vrf_enabled	(Optional)
vrf	(Optional) vrf key
lisp_enabled	(Optional) lisp enabled status
req_id	(Optional) req id
operation	(Optional) operation

Command Mode

/exec

show forwarding distribution multicast

show forwarding distribution multicast [ messages ] [ __readonly__ <num_accepting_routes> <slot> <fibstate> ]

Syntax Description


show
forwarding	Display Forwarding Information
distribution	FIB distribution information
multicast	Multicast FIB distribution information
messages	(Optional) Outstanding Message Information
__readonly__	(Optional)
num_accepting_routes	(Optional) Number of fibs accepting routes
slot	(Optional) Slot
fibstate	(Optional) IP Multicast FIB process state

Command Mode

/exec

show forwarding distribution multicast client-ack-db

show forwarding distribution multicast client-ack-db [ __readonly__ <xid> <num_recepients> <num_responses> ]

Syntax Description


show	show
forwarding	Display Forwarding Information
distribution	FIB distribution information
multicast	Multicast
client-ack-db	Displays the client ack db
__readonly__	(Optional)
xid	(Optional) XID
num_recepients	(Optional) Number of recepients
num_responses	(Optional) Number of responses

Command Mode

/exec

show forwarding distribution multicast client

show forwarding distribution multicast client [ __readonly__ <num-clients> <client-name> <client-id> <shmem-name> ]

Syntax Description


show
forwarding	Display Forwarding Information
distribution	FIB distribution information
multicast	Multicast information
client	Show multicast distribution client information
__readonly__	(Optional)
num-clients	(Optional) Number of Clients registered
client-name	(Optional) Client Name
client-id	(Optional) Client-id
shmem-name	(Optional) Shared Memory Segment Name

Command Mode

/exec

show forwarding distribution multicast download

show forwarding distribution multicast download [ __readonly__ [ TABLE_MFDM_DOWNLOAD_INFO <db_type> [ TABLE_MFDM_PENDING_INFO [ <table_id> ] ] ] ]

Syntax Description


show
forwarding	forwarding information
distribution	FIB distribution information
multicast	Multicast FIB distribution information
download	show download queues
__readonly__	(Optional)
TABLE_MFDM_DOWNLOAD_INFO	(Optional) MFDM download info
db_type	(Optional) Database type
TABLE_MFDM_PENDING_INFO	(Optional) Routes Pending info
table_id	(Optional) Table ID

Command Mode

/exec

show forwarding distribution multicast mfib

show forwarding distribution multicast { mfib-txlist [ vrf <vrf-name> ] | mfib-buffers } [ __readonly__ <no-free-buffers> <no-used-buffers> ]

Syntax Description


show
forwarding	Display Forwarding Information
distribution	FIB distribution information
multicast	Multicast information
mfib-txlist	Show MFIB transmission-list information
vrf	(Optional) Specify VRF
vrf-name	(Optional) Specify VRF name
mfib-buffers	Show MFIB route buffer information
__readonly__	(Optional)
no-free-buffers	(Optional) Number of Free txlist MFIB buffers
no-used-buffers	(Optional) Number of Used txlist MFIB buffers

Command Mode

/exec

show forwarding distribution multicast outgoing-interface-list L2_PRIME

show forwarding distribution multicast outgoing-interface-list L2_PRIME [ __readonly__ <index> <dvif> <platform_index> <ref_count> <l2-oifs> <port_set> ]

Syntax Description


show
forwarding	Display Forwarding Information
distribution	FIB distribution information
multicast	Multicast FIB distribution information
outgoing-interface-list	Outgoing interface list
L2_PRIME	Layer 2 oiflist
index	(Optional) Outgoing Interface List index
__readonly__	(Optional)
dvif	(Optional) Destination VIF
platform_index	(Optional) Platform index
ref_count	(Optional) Reference count
l2-oifs	(Optional) L2 oifs
port_set	(Optional) Port set

Command Mode

/exec

show forwarding distribution multicast resp-ack-timer-msgs

Syntax Description


show
forwarding	Display Forwarding Information
distribution	FIB distribution information
multicast	Multicast information
resp-ack-timer-msgs	show response ack timers for MFDM

Command Mode

/exec

show forwarding distribution multicast route

show forwarding distribution [ ip ] multicast route [ table <id> | vrf { <vrf_name> | <vrf-known-name> | all } ] [ [ group { <gaddr> [ <mask> ] | <gprefix> } [ source { <saddr> [ <smask> ] | <sprefix> } ] ] | summary ] [ __readonly__ TABLE_vrf [ <vrf-name> ] [ <table-name> ] [ <table-id> ] [ <table-wildcard> ] [ <total-num-groups> ] [ TABLE_route_summary [ <vrf-name> ] [ <total-num-routes> ] [ <num-star-g-route> ] [ <num-sg-route> ] [ <num-star-g-prfx> ] [ <num-group-count> ] ] [ TABLE_one_route [ <source-addrs> ] [ <source-len> ] [ <group-addrs> ] [ <group-len> ] [ <df-ordinal> ] [ <rpf-intf> ] [ <flags> ] [ <upstream-addrs> ] [ <stats-state> ] [ <stats-pkts> ] [ <stats-bytes> ] [ <oif-count> ] [ <oiflist-index> ] [ TABLE_oif [ <oif-name> ] [ <mti-src-intf> ] [ <mti-grp-ip> ] [ <mti-src-ip> ] [ <next-hop> ] ] ] ]

Syntax Description


show
forwarding	Display Forwarding Information
distribution	FIB distribution information
ip	(Optional) IPV4 information
multicast	Multicast information
route	Multicast route related information
vrf	(Optional) Specify VRF
vrf_name	(Optional) Specify VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
table	(Optional) Specify Multicast Routing Table
id	(Optional) Multicast Routing Table Identifier
group	(Optional) IPv4 Multicast Group specific
gaddr	(Optional) IPv4 Multicast Group Address
mask	(Optional) mask for group ip address
gprefix	(Optional) IPv4 Multicast Group Prefix
source	(Optional) IPv4 Multicast Source specific
saddr	(Optional) IPv4 Source Address
smask	(Optional) mask for group ip address
sprefix	(Optional) IPv4 Multicast Source Prefix
summary	(Optional) display route counts
__readonly__	(Optional)
TABLE_vrf	(Optional)
vrf-name	(Optional)
table-name	(Optional)
table-id	(Optional)
table-wildcard	(Optional)
total-num-groups	(Optional)
TABLE_route_summary	(Optional)
total-num-routes	(Optional)
num-star-g-route	(Optional)
num-sg-route	(Optional)
num-star-g-prfx	(Optional)
num-group-count	(Optional)
TABLE_one_route	(Optional)
source-addrs	(Optional)
source-len	(Optional)
group-addrs	(Optional)
group-len	(Optional)
df-ordinal	(Optional)
rpf-intf	(Optional)
upstream-addrs	(Optional)
flags	(Optional)
stats-state	(Optional)
stats-pkts	(Optional)
stats-bytes	(Optional)
oif-count	(Optional)
oiflist-index	(Optional)
TABLE_oif	(Optional)
oif-name	(Optional)
mti-src-intf	(Optional)
mti-grp-ip	(Optional)
mti-src-ip	(Optional)
next-hop	(Optional)

Command Mode

/exec

show forwarding distribution multicast route sr um-nat

show forwarding distribution multicast route sr um-nat [ __readonly__ TABLE_one_route <pre-translated-source-addrs><pre-translated-dest-addrs> <post-translated-source-addrs><post-translated-dest-addrs> <post-translated-source-udp-port><post-translated-dest-udp-port> <mti-src-intf><vrf-name> ]

Syntax Description


show
forwarding	Display Forwarding Information
distribution	FIB distribution information
multicast	Multicast information
route	Multicast route related information
sr	sr related information
um-nat	UM NAT route translation information
__readonly__	(Optional)
TABLE_one_route	(Optional)

Command Mode

/exec

show forwarding distribution multicast sr hash-db

Syntax Description


show	show
forwarding	Display Forwarding Information
distribution	FIB distribution information
multicast	Multicast
sr	Service reflect rules
hash-db	Hash database

Command Mode

/exec

show forwarding distribution multicast vxlan dsg-db

Syntax Description


show	show
forwarding	Display Forwarding Information
distribution	FIB distribution information
multicast	Multicast
vxlan	vxlan
dsg-db	delivery group/source db

Command Mode

/exec

show forwarding distribution multicast vxlan vlan-db

Syntax Description


show	show
forwarding	Display Forwarding Information
distribution	FIB distribution information
multicast	Multicast
vxlan	vxlan
vlan-db	Vlan database

Command Mode

/exec

show forwarding distribution nve overlay-vlan

show forwarding distribution nve overlay-vlan [ __readonly__ TABLE_overlay_vlan_peer_id <Vlan> <SVP> <install> <Origin> <VFP-region> <peercount> <peer_id> + ]

Syntax Description


show	Show running system information
forwarding	forwarding information
distribution	fib distribution info
nve	nve distribution info
overlay-vlan	overlay-vlan adjacency info
__readonly__	(Optional)
TABLE_overlay_vlan_peer_id	(Optional) overlay vlan peer id table
Vlan	(Optional) VLAN
SVP	(Optional) SVP
install	(Optional) install
Origin	(Optional) Origin
VFP-region	(Optional) VFP-region
peercount	(Optional) Total count of Peers
peer_id	(Optional) Peer-ID

Command Mode

/exec

show forwarding distribution peer-id

show forwarding distribution peer-id [ vpls | otv ] [ __readonly__ <header> TABLE_peer_id <app> <vlan> <id> <peer_id> ]

Syntax Description


show	Show running system information
forwarding	forwarding information
distribution	fib distribution info
peer-id	HW Peer-id allocation info
vpls	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
otv	(Optional) OTV
__readonly__	(Optional)
header	(Optional) Header
TABLE_peer_id	(Optional) Peer ID table
app	(Optional) OTV/VPLS
vlan	(Optional) VLAN
id	(Optional) ID
peer_id	(Optional) Peer-ID

Command Mode

/exec

show forwarding distribution srv6 local-sid bd-mapping

show forwarding distribution srv6 local-sid bd-mapping [ __readonly__ { local_sid_bd_map <sid_bd_map> } [ { TABLE_local_sid <local_sid> <Table_id> <func_type> <bd> <locator> <function> <args> } ] ]

Syntax Description


show	Show running system information
forwarding	forwarding information
distribution	fib distribution info
srv6	Srv6 related
local-sid	Local SID
bd-mapping	Local Sid to BD mappings
__readonly__	(Optional)
local_sid_bd_map	(Optional) Local-sid to BD mapping
sid_bd_map	(Optional) Local-sid to BD mappingi number
TABLE_local_sid	(Optional) Table with local SID's
local_sid	(Optional) V6 prefix associated with local-sid
Table_id	(Optional) Table ID
func_type	(Optional) Function behavior type
bd	(Optional) Bridge domain
locator	(Optional) Locator V6 address
function	(Optional) function
args	(Optional) args

Command Mode

/exec

show forwarding distribution trace

Syntax Description


show
forwarding	Display Forwarding Information
distribution	fib distribution info
trace	unicast trace information

Command Mode

/exec

show forwarding ecmp

show forwarding ecmp [ { [ vrf { <vrf-name> | <vrf-known-name> } ] lisp } ] [ platform ] [ module <module> ] [ partial ] [ __readonly__ [ <header> <ecmp_hash> <intf> <nh> <v6nh> <hw_index> <num_mpls> <holder> <refcount> <num_paths> <sw_ptr> <ecmp_partial> ] [ TABLE_ecmp { [ <hash> ] [ <num_paths> ] [ <hwindex> ] [ <ecmppartial> ] [ TABLE_index { [ <ecmp_idx> ] [ <cmn_idx> ] } ] [ <refcnt> ] [ <ecmp_holder> ] } [ TABLE_adjacency { [ <intf> ] [ <nh> ] [ <v6nh> ] [ <hw_adj_idx> ] [ <hw_cmn_idx> ] [ <lif> ] [ <hw_nve_adj_idx> ] [ <hw_nve_cmn_idx> ] [ <nve_lif> ] } ] [ <vobj_count> ] [ <vxlan_vobj_count> ] [ <vxlan> ] [ <vobj_list_header> ] [ <vobj-id> ] ] ]

Syntax Description


show
forwarding	Display fib information
ecmp	Show information about ECMPs
vrf	(Optional) display info per VRF
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
lisp	(Optional) Show information about LISP ECMPs
platform	(Optional) one command to show pi and pd info together
module	(Optional) slot
module	(Optional) slot number
partial	(Optional) Show partially installed ECMPs
__readonly__	(Optional)
header	(Optional) o/p header
ecmp_hash	(Optional) ecmp hash
intf	(Optional) interface
nh	(Optional) next hop
v6nh	(Optional) V6 next hop
hw_index	(Optional) Hw index
num_mpls	(Optional) No of MPLS ecmp
holder	(Optional) holder bitmap
refcount	(Optional) refcount
sw_ptr	(Optional) Software pointer
num_paths	(Optional) No of paths
ecmp_partial	(Optional) partial ecmp
TABLE_ecmp	(Optional) ecmp table
hash	(Optional) ecmp hash
num_paths	(Optional) No of paths
hwindex	(Optional) Hw index
ecmppartial	(Optional) partial ecmp
TABLE_index	(Optional) index table
ecmp_idx	(Optional) hw ecmp index
cmn_idx	(Optional) cmn index
refcnt	(Optional) refcount
ecmp_holder	(Optional) holder bitmap
TABLE_adjacency	(Optional) adjacency table
intf	(Optional) interface
nh	(Optional) next hop
v6nh	(Optional) v6 next hop
hw_adj_idx	(Optional) hw adj index
hw_cmn_idx	(Optional) hw cmn index
lif	(Optional) lif
hw_nve_adj_idx	(Optional) nve adj index
hw_nve_cmn_idx	(Optional) nve cmn index
nve_lif	(Optional) nve lif
vobj_count	(Optional) vobj count
vxlan_vobj_count	(Optional) vxlan vobj count
vxlan	(Optional) vxlan
vobj_list_header	(Optional) vobj list header
vobj-id	(Optional) vobj id

Command Mode

/exec

show forwarding ecmp recursive

show forwarding ecmp recursive [ platform ] [ srv6 ] [ max-display-count <display_count> ] [ module <module> ] [ partial ] [ __readonly__ [ TABLE_vobj { [ <header_vobj> ] [ <header_ecmp> ] } [ TABLE_vobj_idx { [ <hw_vobj_index> ] [ <cmn_index> ] } ] [ <num_pfxs> ] [ <ecmp_partial> ] [ <activepath_hdr> ] [ <ecmp_hw_prog_fail> ] [ TABLE_active { [ TABLE_activepath { [ <ap_nh> ] [ <ap_v6nh> ] [ <ap_rnh_len> ] [ <ap_nh_vpn_label> ] [ <ap_rnh_table_id> ] [ <ap_nh_weight> ] } ] } ] [ <backuppath_hdr> ] [ TABLE_backuppath { [ <bp_nh> ] [ <bp_v6nh> ] [ <bp_nh_vpn_label> ] [ <bp_rnh_table_id> ] [ <bp_nh_weight> ] } ] [ <cnh_hdr> ] [ TABLE_cnh { [ <nh> ] [ <v6nh> ] [ <intf> ] [ TABLE_cnh_adj { [ <hw_adj> ] [ <hw_cmn_index> ] [ <lif> ] } ] } ] [ <hw_inst_n> ] [ <ls_count_n> ] [ <hw_inst_o> ] [ <ls_count_o> ] [ <fec_type> ] [ <header_fec_ecmp> ] [ <hw_vobj_fec_idx> ] [ <cmn_idx> ] [ <vobj_hw_inst_n> ] [ <vobj_ls_count_n> ] [ <vobj_hw_inst_o> ] [ <vobj_ls_count_o> ] [ <vobj_refcount> ] [ <vobj_function> ] [ TABLE_vobj_ecmp { [ <ec_hash> ] [ <ec_num_paths> ] [ <ec_hwindex> ] [ <ec_ecmppartial> ] [ <ec_refcnt> ] [ <ec_ecmp_holder> ] } [ TABLE_adjacency_ec { [ <ec_intf> ] [ <ec_nh> ] [ <ec_v6nh> ] [ <ec_hw_adj_idx> ] [ <ec_hw_cmn_idx> ] [ <ec_lif> ] [ <ec_hw_nve_adj_idx> ] [ <ec_hw_nve_cmn_idx> ] [ <ec_nve_lif> ] } ] [ <ec_vobj_count> ] [ <ec_vxlan_vobj_count> ] [ <ec_vxlan> ] [ <ec_vobj_list_header> ] ] ] [ <header> <num_pfxs> <rnh_table_id> <nh> <rnh_len> <v6nh> <hw_instance> <nh_vpn_label> <nh_weight> <cnh_intf> <ecmp_partial> ] [ TABLE_ecmp { [ <hash> ] [ <num_paths> ] [ <hwindex> ] [ <ecmppartial> ] [ TABLE_index { [ <ecmp_idx> ] [ <cmn_idx> ] } ] [ <refcnt> ] [ <ecmp_holder> ] } [ TABLE_adjacency { [ <intf> ] [ <nh> ] [ <v6nh> ] [ <hw_adj_idx> ] [ <hw_cmn_idx> ] [ <lif> ] [ <hw_nve_adj_idx> ] [ <hw_nve_cmn_idx> ] [ <nve_lif> ] } ] [ <vobj_count> ] [ <vxlan_vobj_count> ] [ <vxlan> ] [ <vobj_list_header> ] [ TABLE_vobj_id { [ <vobj-id> ] } ] [ <vobj_function> ] ] ]

Syntax Description


show
forwarding	Display fib information
ecmp	Show information about ECMPs
recursive	Show information about recursive ECMPs
platform	(Optional) one command to show pi and pd info together
srv6	(Optional) Show information about SRV6 encap
module	(Optional) slot
partial	(Optional) Show partially installed ECMPs
module	(Optional) slot number
max-display-count	(Optional) displays max # of routes
display_count	(Optional) count
__readonly__	(Optional)
TABLE_vobj	(Optional) Table vobj
header_vobj	(Optional) vobj o/p header
header_ecmp	(Optional) ecmp o/p header
TABLE_vobj_idx	(Optional) Table vobj index
hw_vobj_index	(Optional) HW VOBJ Index
cmn_index	(Optional) cmn index
num_pfxs	(Optional) Number of prefixes using this virtual object
ecmp_partial	(Optional) partial ecmp
ecmp_hw_prog_fail	(Optional) Ecmp Hardware Program failure
activepath_hdr	(Optional) o/p header
TABLE_active	(Optional) table active
TABLE_activepath	(Optional) table active path
ap_nh	(Optional) Next hop info
ap_v6nh	(Optional) v6 Next hop info
ap_rnh_len	(Optional) Next hop mask length
ap_nh_vpn_label	(Optional) NH VPN label
ap_rnh_table_id	(Optional) The table id where the RNHs are present
ap_nh_weight	(Optional) weighted ecmp info
backuppath_hdr	(Optional) o/p header
TABLE_backuppath	(Optional) backup path table
bp_nh	(Optional) Next hop info
bp_v6nh	(Optional) v6 Next hop info
bp_nh_vpn_label	(Optional) NH VPN label
bp_rnh_table_id	(Optional) The table id where the RNHs are present
bp_nh_weight	(Optional) weighted ecmp info
cnh_hdr	(Optional) o/p header
TABLE_cnh	(Optional) cnh table
nh	(Optional) Next hop info
v6nh	(Optional) v6 Next hop info
intf	(Optional) cnh output interface
TABLE_cnh_adj	(Optional) Table cnh adjacency
hw_adj	(Optional) cnh hw adjacency
hw_cmn_index	(Optional) cnh hw cmn idx
lif	(Optional) lif
hw_inst_n	(Optional) Hardware instance info new
ls_count_n	(Optional) ls count new
hw_inst_o	(Optional) Hardware instance info old
ls_count_o	(Optional) ls count old
fec_type	(Optional) fec type
header_fec_ecmp	(Optional) o/p header
hw_vobj_fec_idx	(Optional) hw fec idx
cmn_idx	(Optional) cmn idx
vobj_hw_inst_n	(Optional) vobj hw instance
vobj_ls_count_n	(Optional) ls count new
vobj_hw_inst_o	(Optional) hw instnace info old
vobj_ls_count_o	(Optional) ls count old
vobj_refcount	(Optional) vobj refcount
vobj_function	(Optional) vobj function
TABLE_vobj_ecmp	(Optional) ecmp table
ec_hash	(Optional) ecmp hash
ec_num_paths	(Optional) No of paths
ec_hwindex	(Optional) Hw index
ec_ecmppartial	(Optional) partial ecmp
ec_refcnt	(Optional) refcount
ec_ecmp_holder	(Optional) holder bitmap
TABLE_adjacency_ec	(Optional) adjacency table
ec_intf	(Optional) interface
ec_nh	(Optional) next hop
ec_v6nh	(Optional) v6 next hop
ec_hw_adj_idx	(Optional) hw adj index
ec_hw_cmn_idx	(Optional) hw cmn index
ec_lif	(Optional) lif
ec_hw_nve_adj_idx	(Optional) nve adj index
ec_hw_nve_cmn_idx	(Optional) nve cmn index
ec_nve_lif	(Optional) nve lif
ec_vobj_count	(Optional) vobj count
ec_vxlan_vobj_count	(Optional) vxlan vobj count
ec_vxlan	(Optional) vxlan
ec_vobj_list_header	(Optional) vobj list header
vobj_function	(Optional) vobj function
header	(Optional) o/p header
num_pfxs	(Optional) Number of prefixes using this virtual object
rnh_table_id	(Optional) The table id where the RNHs are present
nh	(Optional) Next hop info
rnh_len	(Optional) Next hop mask length
v6nh	(Optional) V6 Next hop info
hw_instance	(Optional) Hardware instance info
nh_vpn_label	(Optional) NH VPN label
nh_weight	(Optional) weighted ecmp info
cnh_intf	(Optional) cnh output interface
ecmp_partial	(Optional) partial ecmp
TABLE_ecmp	(Optional) ecmp table
hash	(Optional) ecmp hash
num_paths	(Optional) No of paths
hwindex	(Optional) Hw index
ecmppartial	(Optional) partial ecmp
TABLE_index	(Optional) index table
ecmp_idx	(Optional) hw ecmp index
cmn_idx	(Optional) cmn index
refcnt	(Optional) refcount
ecmp_holder	(Optional) holder bitmap
TABLE_adjacency	(Optional) adjacency table
intf	(Optional) interface
nh	(Optional) next hop
v6nh	(Optional) v6 next hop
hw_adj_idx	(Optional) hw adj index
hw_cmn_idx	(Optional) hw cmn index
lif	(Optional) lif
hw_nve_adj_idx	(Optional) nve adj index
hw_nve_cmn_idx	(Optional) nve cmn index
nve_lif	(Optional) nve lif
vobj_count	(Optional) vobj count
vxlan_vobj_count	(Optional) vxlan vobj count
vxlan	(Optional) vxlan
vobj_list_header	(Optional) vobj list header
TABLE_vobj_id	(Optional) vobj_id table
vobj-id	(Optional) vobj id

Command Mode

/exec

show forwarding inconsistency

show forwarding [ ip | ipv4 ] [ unicast ] inconsistency [ suppress-transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] [ __readonly__ [ <err_str> ] [ <cc_header> ] [ <table_id> ] [ <slot_id> ] [ <exec_time> ] [ <elapsed_time> ] [ <inconsis_adjs> ] [ TABLE_inconsistency_adjs { <id> <slot> [ <unit> ] <vrf> [ <ipaddr> ] [ <ipprefix> ] [ <interface> ] <reason> } ] [ <inconsis_routes> ] [ TABLE_inconsistency_routes { <id> <slot> [ <unit> ] <vrf> [ <ipaddr> ] [ <ipprefix> ] [ <interface> ] <reason> } ] [ <run_status> ] ]

Syntax Description


show	show
forwarding	Display Forwarding Information
ip	(Optional) ipv4
ipv4	(Optional) ipv4
unicast	(Optional) unicast
inconsistency	route inconsistency check
suppress-transient	(Optional) Supress Transient state
vrf	(Optional) check routes for a specific VRF
vrf-name	(Optional) VRF name
module	(Optional) check routes for a specific module
module	(Optional) module number
all_modules	(Optional) all module's
all_vrfs	(Optional) all vrf's
__readonly__	(Optional)
err_str	(Optional)
cc_header	(Optional)
table_id	(Optional)
slot_id	(Optional)
exec_time	(Optional)
elapsed_time	(Optional)
inconsis_adjs	(Optional)
TABLE_inconsistency_adjs	(Optional)
id	(Optional)
slot	(Optional)
unit	(Optional)
vrf	(Optional)
ipaddr	(Optional)
ipprefix	(Optional)
interface	(Optional)
reason	(Optional)
inconsis_routes	(Optional)
TABLE_inconsistency_routes	(Optional)
id	(Optional)
slot	(Optional)
unit	(Optional)
vrf	(Optional)
ipaddr	(Optional)
ipprefix	(Optional)
interface	(Optional)
reason	(Optional)
run_status	(Optional)

Command Mode

/exec

show forwarding interfaces

show forwarding interfaces [ module <module> ] [ __readonly__ TABLE_intf_str <intf> <v4adjcnt> <v6adjcnt> <v4rpfmode> <v6rpfmode> <mac> ]

Syntax Description


show
forwarding	fib information
interfaces	show fib interface info
__readonly__	(Optional)
TABLE_intf_str	(Optional) show interface string
intf	(Optional) interface name
module	(Optional) slot
module	(Optional) slot number
v4adjcnt	(Optional) count of v4 adjacencies
v6adjcnt	(Optional) count of v6 adjacencies
mac	(Optional) mac address
v4rpfmode	(Optional) v4 uRPF mode
v6rpfmode	(Optional) v6 uRPF mode

Command Mode

/exec

show forwarding ipv6

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } | table <table_id> ] ipv6 [ route | rnhdb ] [ recursive ] [ detail | summary | platform | partial | <prefix> [ longer-prefixes ] [ detail | platform ] | <address> [ detail | platform ] | interface <interface> | next-hop <nh> | attached | unresolved | adjacency { <aif> <anh> | drop | glean | punt } ] [ max-display-count <display_count> ] [ module <module> | vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] + [ __readonly__ [ <prefix_count> ] [ TABLE_vrf { [ <vrfname> ] [ <tblname> ] [ <tableid> ] [ TABLE_prefix { [ <pfx> ] [ <num_paths> ] [ <vobj-id> ] [ TABLE_path { [ <nexthop> | <special> ] [ <intf> ] [ <route_updates> ] [ <route_inserts> ] [ <route_deletes> ] [ <route_count> ] [ <path_count> ] [ TABLE_mask { [ <mask_length> ] [ <routes_per_mask> ] } ] } ] [ <hw_handle> ] [ <flags> ] [ <holder> ] [ <nxt_obj_type> ] [ <hw_idx_v6adj> ] [ <cmn-idx> ] [ <lif> ] [ <buf-idx> ] } ] } ] [ <packet_cnt> ] [ <byte_cnt> ] ]

Syntax Description


show
forwarding	display fib information
vrf	(Optional) display info per VRF
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
vrf-all	(Optional) Display information for all VRFs
table	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
table_id	(Optional) table id in hex
ipv6	ipv6
route	(Optional) display IP routing table
platform	(Optional) one command to show pi and pd info together
rnhdb	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
recursive	(Optional) display routes with recursive next hops
detail	(Optional) show detailed information about the routes
summary	(Optional) display route counts
partial	(Optional) display routes with partial ECMPs
longer-prefixes	(Optional) display longer prefixes
interface	(Optional) display routes with this output i/f only
interface	(Optional) output interface
next-hop	(Optional) display routes with this next-hop only
attached	(Optional) display directly connected routes
unresolved	(Optional) display unresolved routes
adjacency	(Optional) display adjacency information
aif	(Optional) adjacency output interface
drop	(Optional) display routes via drop adjacency
glean	(Optional) display routes via glean adjacency
punt	(Optional) display routes via punt adjacency
module	(Optional) slot
module	(Optional) slot number
max-display-count	(Optional) displays max # of routes
display_count	(Optional) count
__readonly__	(Optional)
TABLE_vrf	(Optional) vrf table
vrfname	(Optional) VRF name
tblname	(Optional) table name
tableid	(Optional) table id
prefix_count	(Optional) total number of prefix in VRF
TABLE_prefix	(Optional) all xml prefix entries
pfx	(Optional) ipv6 prefix
num_paths	(Optional) no of paths
vobj-id	(Optional) vobj-id
TABLE_path	(Optional) path table
nexthop	(Optional) next hop address
special	(Optional) special adjacencies
intf	(Optional) output interface
route_updates	(Optional) route update in VRF
route_inserts	(Optional) route insert in VRF
route_deletes	(Optional) route delete in VRF
route_count	(Optional) total number of routes in VRF
path_count	(Optional) total number of paths in VRF
TABLE_mask	(Optional) mask table
mask_length	(Optional) length of mask
routes_per_mask	(Optional) routes per mask
hw_handle	(Optional) hw handle
flags	(Optional) flags
holder	(Optional) holder
nxt_obj_type	(Optional) next obj type
hw_idx_v6adj	(Optional) v6 adj hw idx
cmn-idx	(Optional) cmn idx
lif	(Optional) lif
buf-idx	(Optional) Buffer index
packet_cnt	(Optional) Packet count
byte_cnt	(Optional) Byte count

Command Mode

/exec

show forwarding ipv6 adjacency

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 adjacency [ mpls ] [ nve ] [ <aif> ] [ <anh> ] [ detail | stats | platform ] [ module <module> ] [ __readonly__ [ <adj-count> ] [ TABLE_adj { [ <fec> ] <nexthop> <rewinfo> [ <interface> ] [ <pkts> ] [ <bytes> ] [ <bgp_rnh> ] [ <bgp_orig_as> ] [ <bgp_peer_as> ] [ <hh> ] [ <refcount> ] } ] [ TABLE_v6_adj { [ <nh> ] [ <rwinfo> ] [ <intf> ] [ <intf_idx> ] [ <hh> ] [ <refcnt> ] [ <flags> ] [ <holder> ] [ <pbr_cnt> ] [ <wccp_cnt> ] [ TABLE_index { [ <hw_adj> ] [ <cmn-idx> ] [ <lif> ] } ] } ] ]

Syntax Description


show
forwarding	display fib information
ipv6	ipv6
adjacency	display adjacency information
platform	(Optional) one command to show pi and pd info together
vrf	(Optional) display info per VRF
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
vrf-all	(Optional) Display information for all VRFs
mpls	(Optional) mpls adjacency information
nve	(Optional) nve adjacency information
aif	(Optional) adjacency output interface
detail	(Optional) detail
stats	(Optional) adjacency statistics
module	(Optional) slot
module	(Optional) slot number
__readonly__	(Optional)
adj-count	(Optional) total adj count
TABLE_adj	(Optional) Table Adjacency
fec	(Optional) FEC info
nexthop	(Optional) next hop address
rewinfo	(Optional) rewrite information
interface	(Optional) output interface
pkts	(Optional) packet stats
bytes	(Optional) bytes stats
bgp_rnh	(Optional) next hop address
bgp_orig_as	(Optional) bgp orig as
bgp_peer_as	(Optional) bgp peer as
hh	(Optional) Hardware Handle
refcount	(Optional) reference count
TABLE_v6_adj	(Optional) Table Adjacency
nh	(Optional) next hop address
rwinfo	(Optional) rewrite information
intf	(Optional) output interface
intf_idx	(Optional) Interface index
hh	(Optional) Hardware Handle
refcnt	(Optional) reference count
flags	(Optional) Adjacency flags
holder	(Optional) Holder bitmap
pbr_cnt	(Optional) PBR count
wccp_cnt	(Optional) WCCP count
TABLE_index	(Optional) HW index table
hw_adj	(Optional) v4 adj hw index
cmn-idx	(Optional) CMN Index
lif	(Optional) LIF

Command Mode

/exec

show forwarding ipv6 inconsistency

show forwarding ipv6 [ unicast ] inconsistency [ suppress-transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] [ __readonly__ [ <err_str> ] [ <cc_header> ] [ <table_id> ] [ <slot_id> ] [ <exec_time> ] [ <elapsed_time> ] [ <inconsis_adjs> ] [ TABLE_inconsistency_adjs { <idipv6> <slotipv6> [ <unitipv6> ] <vrfipv6> [ <ipv6addr> ] [ <ipv6prefix> ] [ <interfaceipv6> ] <reasonipv6> } ] [ <inconsis_routes> ] [ TABLE_inconsistency_routes { <idipv6> <slotipv6> [ <unitipv6> ] <vrfipv6> [ <ipv6addr> ] [ <ipv6prefix> ] [ <interfaceipv6> ] <reasonipv6> } ] [ <run_status> ] ]

Syntax Description


show	show
forwarding	Display Forwarding Information
ipv6	ipv6
unicast	(Optional) unicast
inconsistency	route inconsistency check
suppress-transient	(Optional) Supress Transient state
vrf	(Optional) check routes for a specific VRF
vrf-name	(Optional) VRF name
module	(Optional) check routes for a specific module
module	(Optional) module number
all_modules	(Optional) all module's
all_vrfs	(Optional) all vrf's
__readonly__	(Optional)
err_str	(Optional)
cc_header	(Optional)
table_id	(Optional)
slot_id	(Optional)
exec_time	(Optional)
elapsed_time	(Optional)
inconsis_adjs	(Optional)
TABLE_inconsistency_adjs	(Optional)
idipv6	(Optional)
slotipv6	(Optional)
unitipv6	(Optional)
vrfipv6	(Optional)
interfaceipv6	(Optional)
reasonipv6	(Optional)
inconsis_routes	(Optional)
TABLE_inconsistency_routes	(Optional)
idipv6	(Optional)
slotipv6	(Optional)
unitipv6	(Optional)
vrfipv6	(Optional)
interfaceipv6	(Optional)
reasonipv6	(Optional)
run_status	(Optional)

Command Mode

/exec

show forwarding ipv6 multicast route

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | all } | table <tab_id> ] ipv6 multicast route { [ group { <group> | <group_addr> } [ source { <source> | <source_addr> } ] | module <module> | vrf { <vrf-name> | all } ] + | summary [ module <module> | vrf { <vrf-name> | <vrf-known-name> | all } ] + } [ __readonly__ [ <table_type> ] [ <vrfname> ] [ <table_id> ] [ <num_routes> <num_starg_routes> <num_sg_routes> <num_gprefix_routes> ] [ <num_groups> ] [ <num_sources> ] [ <num_prefix_insert_fail> ] [ [ TABLE_MROUTE_INFO <address> [ <src_len> <grp_len> ] [ <df_ordinal> ] [ <rpfif> ] [ <rpf_ifindex> ] <flag> [ <flag_value> ] <route_pkts> <route_bytes> <oiflist_id> <oif_count> <oiflist_flag> [ TABLE_OIF_INFO <oifindex> [ <vlan> ] [ TABLE_MCAST_OIF_INTF_INFO [ <oifname> ] [ <dvif> ] ] [ <platform_id> ] [ <encap_id> ] [ <hw_index> ] ] ] ] ]

Syntax Description


show
forwarding	display fib information
ipv6	ipv6
multicast	IPV6 related Multicast information
route	Multicast route information
vrf	(Optional) display info per VRF
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
table	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
tab_id	(Optional) table number
group	(Optional) Multicast IPv6 Group Address
source	(Optional) Multicast IPv6 Source Address
summary	display route counts
module	(Optional) slot
module	(Optional) slot number
__readonly__	(Optional)
table_type	(Optional) Table Type
vrfname	(Optional) VRF name
table_id	(Optional) Table ID
num_routes	(Optional) Number of routes
num_starg_routes	(Optional) Number of (*,G) routes
num_sg_routes	(Optional) Number of (S,G) routes
num_gprefix_routes	(Optional) Number of (*,G-prefix) routes
num_groups	(Optional) Number of group entries in the table
num_prefix_insert_fail	(Optional) Prefix insert fail count
num_sources	(Optional) Number of (S, G) entries for the group address
TABLE_MROUTE_INFO	(Optional) Mroute info
address	(Optional) Mcast address
src_len	(Optional) Source Address Mask
grp_len	(Optional) Group address Mask
df_ordinal	(Optional) DF ordinal
rpfif	(Optional) RPF interface
rpf_ifindex	(Optional) RPF Interface ifIndex
flag	(Optional) Route type flag
flag_value	(Optional) hex value of route flag
route_pkts	(Optional) Route packet count
route_bytes	(Optional) Route bytes
oiflist_id	(Optional) OIF list Identifier
oif_count	(Optional) Number of OIFs
oiflist_flag	(Optional) OIF List flag
TABLE_OIF_INFO	(Optional) OIF Info
oifindex	(Optional) OIF Interface ifIndex
vlan	(Optional) Vlan id
TABLE_MCAST_OIF_INTF_INFO	(Optional) OIF Interfaces
oifname	(Optional) OIF Interface name
dvif	(Optional) DVIF
platform_id	(Optional) Platform-index
encap_id	(Optional) Encap ID
hw_index	(Optional) Harware index

Command Mode

/exec

show forwarding kvfib cache on

show forwarding kvfib cache { on | off }

Syntax Description


show
forwarding	fib information
kvfib	kvfib
cache	cache
on	set variable
off	reset variable

Command Mode

/exec

show forwarding l2 multicast

show forwarding l2 multicast { [ { vlan <vlan-id> [ { group <grpaddr> source <srcaddr> } | { group <v6grpaddr> source <v6srcaddr> } | destination-mac <dstmac> ] } ] } [ vdc <vdc-id> ] [ module <num> ] [ __readonly__ [ TABLE_L2_MCAST_INFO <vlan_id> [ <group> ] [ <group_v6> ] [ <source> ] [ <source_v6> ] [ <dmac> ] <epoch> <resource_id> <dest_index> [ <hw_handle> ] [ <text> ] [ <value> ] ] ]

Syntax Description


show	Show running system information
forwarding	Forwarding information
l2	L2 related information
multicast	Multicast related information
vlan	(Optional) Information Specific to a Vlan
vlan-id	(Optional) Vlan id value
group	(Optional) (S,G) specific information
grpaddr	(Optional) Group address
source	(Optional) source specific information
srcaddr	(Optional) Source address
destination-mac	(Optional) Destination MAC address
dstmac	(Optional) Ethernet MAC address
vdc	(Optional) VDC
vdc-id	(Optional) VDC id
module	(Optional) Slot
num	(Optional) Slot number
__readonly__	(Optional)
TABLE_L2_MCAST_INFO	(Optional) L2 Multicast Info
vlan_id	(Optional) Vlan Identifier
group	(Optional) Multicast IPv4 Group Address
group_v6	(Optional) Multicast IPv6 Group Address
source	(Optional) Multicast IPv4 Source Address
source_v6	(Optional) Multicast IPv6 Source Address
dmac	(Optional) Destination MAC address
epoch	(Optional) Epoch number
resource_id	(Optional) Resource Identifier
dest_index	(Optional) Destination Index Identifier
hw_handle	(Optional) Hardware Handle
text	(Optional) String
value	(Optional) Value

Command Mode

/exec

show forwarding l2vpn label vpls

show forwarding l2vpn label [ <label_id> ] vpls [ module module ] [ __readonly__ <label_id> ]

Syntax Description


show	show
forwarding	forwarding
l2vpn	l2vpn forwarding
label	VC label
label_id	(Optional) VC label
vpls	VPLS
module	(Optional) slot
module	(Optional) slot number
__readonly__	(Optional)
label_id	(Optional) Label ID

Command Mode

/exec

show forwarding l2vpn label xconnect

show forwarding l2vpn label [ <label_id> ] xconnect [ module module ] [ __readonly__ <label_id> ]

Syntax Description


show	show
forwarding	forwarding
l2vpn	l2vpn forwarding
label	VC label
label_id	(Optional) VC label
xconnect	xconnect or VPWS
module	(Optional) slot
module	(Optional) slot number
__readonly__	(Optional)
label_id	(Optional) Label ID

Command Mode

/exec

show forwarding l2vpn vlan

show forwarding l2vpn vlan [ <vlan_id> ] [ module <module> ] [ __readonly__ <vlan> ]

Syntax Description


show	show
forwarding	forwarding
l2vpn	l2vpn forwarding
vlan	vlan
vlan_id	(Optional) vlan id
module	(Optional) slot
module	(Optional) slot number
__readonly__	(Optional)
vlan	(Optional) vlan

Command Mode

/exec

show forwarding mpls

show forwarding mpls [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } [ label <label-id> | <prefix> | <v6prefix> ] | table <table_id> [ label <label-id> | <prefix> | <v6prefix> ] | label-space <label-space-id> | label <label-id> | <prefix> | <v6prefix> ] [ stats ] [ module <module> ] [ implicit ] [ platform ] [ __readonly__ [ { TABLE_mpls <label> [ { TABLE_table_id [ <out-table-id> ] [ <fec> ] [ <out-ip> ] [ <out-intf> ] [ <out-label> ] [ <out-op> ] [ <hh> ] [ <ref-count> ] [ <hw-index> ] } ] [ <in-pkts> ] [ <in-bytes> ] [ <swap-out-pkts> ] [ <swap-out-bytes> ] [ <tunnel-out-pkts> ] [ <tunnel-out-bytes> ] } ] ]

Syntax Description


show	show
forwarding	forwarding
mpls	mpls forwarding
vrf	(Optional) display info per VRF
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known vrf name
vrf-all	(Optional) Display information for all VRFs
table	(Optional) display info per vpn-id
table_id	(Optional) table number
label-space	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
label-space-id	(Optional) label space id
label	(Optional) mpls labels
label-id	(Optional) mpls label value
prefix	(Optional) Labels for single exact match route
module	(Optional) slot
module	(Optional) slot number
stats	(Optional) Label Statistics
implicit	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
platform	(Optional) Display platform information
__readonly__	(Optional)
TABLE_mpls	(Optional)
label	(Optional) mpls label value
TABLE_table_id	(Optional) Table table id
out-table-id	(Optional) Output table-id
fec	(Optional) Prefix/Tunnel ID
out-ip	(Optional) Output Next Hop
out-intf	(Optional) Output Interface
out-label	(Optional) Output Label
out-op	(Optional) Output Label op
hh	(Optional) Hardware Handle
ref-count	(Optional) Ref Count
hw-index	(Optional) HW index for adj
in-pkts	(Optional) Label Input Packet Stats
in-bytes	(Optional) Label Input Bytes Stats
swap-out-pkts	(Optional) Label Swap Output Packet Stats
swap-out-bytes	(Optional) Label Swap Output Bytes Stats
tunnel-out-pkts	(Optional) Label Tunnel Output Packet Stats
tunnel-out-bytes	(Optional) Label Tunnel Output Bytes Stats

Command Mode

/exec

show forwarding mpls drop-stats

show forwarding mpls drop-stats [ platform | label0-fwd-stats ] [ __readonly__ [ { TABLE_drop_stats <unit-number> <pkts> <bytes> } ] ]

Syntax Description


show	show
forwarding	forwarding
mpls	mpls forwarding
drop-stats	MPLS dropped packets
platform	(Optional) command to display stats per chip
label0-fwd-stats	(Optional) command to display stats for label0
__readonly__	(Optional)
TABLE_drop_stats	(Optional) Table for mpls drop stats
unit-number	(Optional) unit number
pkts	(Optional) Label Packet Stats
bytes	(Optional) Label Bytes Stats

Command Mode

/exec

show forwarding mpls ecmp

show forwarding mpls ecmp [ module <module> ] [ platform ] [ __readonly__ [ { TABLE_ecmp [ <type> ] [ <num_paths> ] [ <ip_paths> ] [ <mpls_paths> ] [ <ecmp_hash> ] [ <holder> ] [ <refcount> ] [ <hw_index> ] [ <fec> ] [ { TABLE_ecmp_paths [ <out-intf> ] [ <out-ip> ] [ <label-info> ] [ <refcount> ] [ <hh> ] [ <ecmp-type> ] } ] } ] ]

Syntax Description


show	show
forwarding	display fib information
mpls	mpls forwarding
ecmp	mpls ecmps
module	(Optional) slot
module	(Optional) slot number
platform	(Optional) show pd info
__readonly__	(Optional)
TABLE_ecmp	(Optional)
type	(Optional) ecmp type
num_paths	(Optional) No of paths
ip_paths	(Optional) No of ip paths
mpls_paths	(Optional) No of mpls paths
ecmp_hash	(Optional) ecmp hash
holder	(Optional) holder bitmap
refcount	(Optional) refcount
hw_index	(Optional) Hw index
fec	(Optional) FEC
TABLE_ecmp_paths	(Optional)
out-intf	(Optional) Output Interface
out-ip	(Optional) Output Next Hop
label-info	(Optional) label info
refcount	(Optional) refcount
hh	(Optional) Hardware Handle
ecmp-type	(Optional) type for per path in ecmp

Command Mode

/exec

show forwarding mpls eompls

show forwarding mpls eompls [ peers { <addr> | all } ] [ __readonly__ [ { TABLE_peer_ip <peer_ip> <peer_id> <vlan_bmp> <rx_pkts> <rx_bytes> } ] ]

Syntax Description


show	Show
forwarding	Forwarding information
mpls	mpls forwarding
eompls	eompls
peers	(Optional) nve peers
addr	(Optional) peer ipaddress
all	(Optional) Display peer info for all peers
__readonly__	(Optional)
TABLE_peer_ip	(Optional)
peer_ip	(Optional) peer address
peer_id	(Optional) peer id
vlan_bmp	(Optional) vlan bitmap
rx_pkts	(Optional) packet stats
rx_bytes	(Optional) bytes stats

Command Mode

/exec

show forwarding mpls eompls ir

show forwarding mpls eompls ir { [ vlan [ all | <vlan_id> ] ] | [ peer [ all | <peer_ip> ] ] } [ __readonly__ [ { TABLE_VLAN <vlan_id> <vni> <ifindex> <plt_space> <bitmap> <peer> + <marked> + } ] [ { TABLE_ONE_PEER <peer> <id> <repl_id> <oif> <path_intf> + <vcount> <vlan_id> + <plt_space> } ] ]

Syntax Description


show	Show running system information
forwarding	Forwarding information
mpls	mpls
eompls	eompls
ir	ir
vlan	(Optional) vlans all
all	(Optional) all
vlan_id	(Optional) vlan-id
peer	(Optional) peers-all
all	(Optional) all
peer_ip	(Optional) show detailed info for peer
__readonly__	(Optional)
TABLE_VLAN	(Optional) vlan peer ids table
vlan_id	(Optional) vlan id
vni	(Optional) vni
ifindex	(Optional) ifindex
plt_space	(Optional) platform space
bitmap	(Optional) peer bitmap
peer	(Optional) peer_address
marked	(Optional) marked
TABLE_ONE_PEER	(Optional) vlan peer ids table
peer	(Optional) vlan id
id	(Optional) vni
repl_id	(Optional) repli id
oif	(Optional) ifindex
path_intf	(Optional) pathintf name
vcount	(Optional) vlan count
vlan_id	(Optional) vlanid
plt_space	(Optional) platform space

Command Mode

/exec

show forwarding mpls option_b

show forwarding mpls option_b [ label <label> ] [ module <module> ] [ platform ] [ __readonly__ [ { TABLE_mpls_opt_b <label> [ <prefix> ] [ <v6prefix> ] [ <nxhop> ] [ <out-interface> ] [ <out-op> ] } ] ]

Syntax Description


show	show
forwarding	forwarding
mpls	mpls forwarding
option_b	Option B
label	(Optional) mpls labels
label	(Optional) mpls label value
module	(Optional) slot
module	(Optional) slot number
platform	(Optional) show pd info
__readonly__	(Optional)
TABLE_mpls_opt_b	(Optional)
label	(Optional) mpls label value
prefix	(Optional) Output Interface
nxhop	(Optional) Output Next Hop
out-interface	(Optional) Output Label op
out-op	(Optional) Output Label op

Command Mode

/exec

show forwarding mpls srte module

show forwarding mpls srte module [ <module> ] [ __readonly__ [ { TABLE_srte <table-id> [ { TABLE_binding_label <binding-label> <parent-table-id> <parent-vobj-id> [ { TABLE_prefix <prefix> <vrf> } ] } ] } ] ]

Syntax Description


show	Show
forwarding	Forwarding information
mpls	mpls forwaring
srte	SR Traffic Engineering
module	slot
module	(Optional) slot number
__readonly__	(Optional)
TABLE_srte	(Optional)
table-id	(Optional) table id
TABLE_binding_label	(Optional)
binding-label	(Optional) binding label
parent-table-id	(Optional) parent table id
parent-vobj-id	(Optional) parent vobj id
TABLE_prefix	(Optional)
prefix	(Optional) prefix
vrf	(Optional) vrf

Command Mode

/exec

show forwarding mpls summary

show forwarding mpls summary [ module <module> ] [ __readonly__ [ { TABLE_labels <space> <count> } <total_deagg_labels> <feature_evpn_status> ] ]

Syntax Description


show	show
forwarding	display fib information
mpls	mpls forwarding
summary	summary
module	(Optional) slot
module	(Optional) slot number
__readonly__	(Optional)
TABLE_labels	(Optional)
space	(Optional) label space
count	(Optional) number of labels
total_deagg_labels	(Optional) total deagg labels
feature_evpn_status	(Optional) feature evpn status

Command Mode

/exec

show forwarding multicast-sr loopback interface

show forwarding multicast-sr loopback interface [ __readonly__ [ <port-num> ] ]

Syntax Description


show
forwarding	display fib information
multicast-sr	multicast service reflect information
interface	loopback interface
loopback	loopback interface
__readonly__	(Optional)
port-num	(Optional) Port number

Command Mode

/exec

show forwarding multicast-sr mac-trap-db

show forwarding multicast-sr mac-trap-db [ __readonly__ { [ TABLE_mac_trap_db <mac-addr> <mac-trap-id> <ref-cnt> ] <total-count> } ]

Syntax Description


show	Show running system information
forwarding	display platform fib information
multicast-sr	multicast service reflect information
mac-trap-db	display internal mac-trap db
__readonly__	(Optional)
TABLE_mac_trap_db	(Optional) display internal mac-trap db
mac-addr	(Optional) MAC address
mac-trap-id	(Optional) MAC trap ID
ref-cnt	(Optional) Reference Count
total-count	(Optional) total count

Command Mode

/exec

show forwarding multicast outgoing-interface-list

show forwarding multicast outgoing-interface-list { L2 | L3 | vxlan-encap | vxlan-ir-dci-encap | mvpn } [ platform ] [ module <module> ] [ <index> ] [ __readonly__ [ <refcount> ] [ <total_l2_oiflist> ] [ <total_l3_oiflist> ] [ <slot> ] [ TABLE_MCAST_OIF_INFO [ <oiflist_idx> ] [ <vlan> ] [ <num_oif> ] [ TABLE_MCAST_OIF_INTF_INFO [ <intf> ] [ <dvif> ] ] [ <encap_id> ] [ <hw_oiflist_idx> ] [ <mcidx> ] ] ]

Syntax Description


show
forwarding	Forwarding information
multicast	Multicast IPv4 information
outgoing-interface-list	show outgoing interface list info
L2	Layer 2 oiflist
L3	Layer 3 oiflist
vxlan-encap	vxlan-encap oiflist
vxlan-ir-dci-encap	vxlan-ir-dci-encap oiflist
mvpn	MVPN oiflist
platform	(Optional) Display PI/PD
module	(Optional) slot
module	(Optional) slot number
index	(Optional) Outgoing Interface List Index
__readonly__	(Optional)
refcount	(Optional) Reference count
total_l2_oiflist	(Optional) total l2 oiflist
total_l3_oiflist	(Optional) total l3 oiflist
slot	(Optional) slot number
TABLE_MCAST_OIF_INFO	(Optional) Mcast OIF Info
oiflist_idx	(Optional) Outgoing Interface List Index
vlan	(Optional) Vlan id
num_oif	(Optional) Number of outgoing interfaces
TABLE_MCAST_OIF_INTF_INFO	(Optional) OIF Interfaces
intf	(Optional) OIF name
dvif	(Optional) DVIF
encap_id	(Optional) encap_id
hw_oiflist_idx	(Optional) Hardware Outgoing Interface List Index
mcidx	(Optional) MC Index

Command Mode

/exec

show forwarding multicast pvlan replicated-routes

show forwarding multicast pvlan replicated-routes [ { group <group_addr> [ [ source <source_addr> [ vlan <vlan_id> ] ] | vlan <vlan_id> ] | vlan <vlan_id> } ] [ __readonly__ [ { TABLE_entry <sh_vlan> <sh_group> <sh_source> } ] ]

Syntax Description


show
forwarding	display fib information
multicast	Multicast IPv4 information
pvlan	PVLAN information
replicated-routes	Display replicated route database
group	(Optional) group address
group_addr	(Optional) group address
source	(Optional) source address
source_addr	(Optional) source address
vlan	(Optional) vlan id
vlan_id	(Optional) vlan id
__readonly__	(Optional)
TABLE_entry	(Optional)
sh_vlan	(Optional) vlan id
sh_group	(Optional) group address
sh_source	(Optional) source address

Command Mode

/exec

show forwarding multicast route

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | all } | table <table_id> ] [ ipv4 ] multicast route [ platform ] { [ group { <gaddr> [ <mask> ] | <gprefix> } [ source { <saddr> [ <smask> ] | <sprefix> } ] | module <module> | vrf { <vrf-name> | <vrf-known-name> | all } ] + | summary [ module <module> | vrf { <vrf-name> | <vrf-known-name> | all } ] + } [ __readonly__ [ <table_type> ] [ <vrfname> ] [ <table_id> ] [ <num_routes> <num_starg_routes> <num_sg_routes> <num_gprefix_routes> ] [ <num_groups> ] [ <num_sources> ] [ <num_prefix_insert_fail> ] [ [ TABLE_MROUTE_INFO <mcast_addr> [ <src_len> <grp_len> ] [ <df_ordinal> ] [ <rpfif> ] [ <rpf_ifindex> ] <flag> [ <flag_value> ] <route_pkts> <route_bytes> <oiflist_id> <oif_count> [ <refcount> ] <oiflist_flag> [ TABLE_OIF_INFO <oifindex> [ TABLE_MCAST_VLAN_INFO [ <vlan> ] [ TABLE_MCAST_OIF_INFO [ <oifname> ] [ <dvif> ] ] ] [ <platform_id> ] [ <encap_id> ] [ TABLE_MCAST_CORE_OIF_INFO [ <core_oifname> ] ] [ <hw_index> ] [ <oif_pkts> <oif_bytes> ] ] ] ] ]

Syntax Description


show
forwarding	Forwarding information
ipv4	(Optional) ipv4
multicast	Multicast IPv4 information
route	Mcast route information
platform	(Optional) Platform Details
table	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
table_id	(Optional) table number
vrf	(Optional) display info per VRF
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
group	(Optional) Multicast IPv4 Group specific info
gaddr	(Optional) Multicast IPv4 Group Address
mask	(Optional) Multicast IPv4 Group Address mask
gprefix	(Optional) Multicast IPv4 Group Prefix
source	(Optional) Multicast IPv4 Source specific info
saddr	(Optional) Multicast IPv4 Source Address
smask	(Optional) Multicast IPv4 Source Address mask
sprefix	(Optional) Multicast IPv4 Source Prefix
summary	display route counts
module	(Optional) slot
module	(Optional) slot number
__readonly__	(Optional)
table_type	(Optional) Table Type
vrfname	(Optional) VRF name
table_id	(Optional) Table ID
num_routes	(Optional) Number of routes
num_starg_routes	(Optional) Number of (*,G) routes
num_sg_routes	(Optional) Number of (S,G) routes
num_gprefix_routes	(Optional) Number of (*,G-prefix) routes
num_groups	(Optional) Number of group entries in the table
num_prefix_insert_fail	(Optional) Prefix insert fail count
num_sources	(Optional) Number of (S, G) entries for the group address
TABLE_MROUTE_INFO	(Optional) Mroute info
mcast_addr	(Optional) Mcast address
src_len	(Optional) Source Address Mask
grp_len	(Optional) Group address Mask
df_ordinal	(Optional) DF ordinal
rpfif	(Optional) RPF interface
rpf_ifindex	(Optional) RPF Interface ifIndex
flag	(Optional) Route type flag
flag_value	(Optional) hex value of route flag
route_pkts	(Optional) Route packet count
route_bytes	(Optional) Route bytes
oiflist_id	(Optional) OIF list Identifier
oif_count	(Optional) Number of OIFs
oiflist_flag	(Optional) OIF List flag
refcount	(Optional) OIF list Reference Count
TABLE_OIF_INFO	(Optional) OIF Info
oifindex	(Optional) OIF Interface ifIndex
TABLE_MCAST_VLAN_INFO	(Optional) Vlan Interfaces
vlan	(Optional) Vlan id
TABLE_MCAST_OIF_INFO	(Optional) OIF Interfaces
oifname	(Optional) OIF Interface name
dvif	(Optional) DVIF
TABLE_MCAST_CORE_OIF_INFO	(Optional) Core-facing OIF Interfaces
core_oifname	(Optional) Core-facing OIF Interface name
platform_id	(Optional) Platform-index
encap_id	(Optional) Encap ID
hw_index	(Optional) Harware index
oif_pkts	(Optional) OIF packets
oif_bytes	(Optional) OIF bytes

Command Mode

/exec

show forwarding nve l2 ingress-replication-peers

show forwarding nve l2 ingress-replication-peers [ ipv4 <peer_ip> | ipv6 <v6_peer_ip> ] + [ __readonly__ [ { TABLE_VLAN <vlan_id> <vni> <ifindex> <plt_space> <peer_bmp> <peer> + } { TABLE_PSS_VLAN <vlan_pss_id> <VNI> <vtep> <peercnt> <pss_peer_bmp> { <pss_peer> <marked> } + } ] + [ [ <peer> <id> <repl_id> <oif> <hash_algo> <path_intf> + <vcount> <vlan_id> + <resync_vcount> <resync_vlan_id> + [ <path> <hash> <flags> <nh> <intf> + ] ] [ <pss_peer> <pss_id> <pss_repl_id> <pss_oif> <pss_hash_algo> <pss_path_intf> + <pss_vcount> <vlan_pss_id> + [ <pss_path> <pss_hash> <pss_flags> <pss_nh> <pss_intf> + ] ] ] ]

Syntax Description


show	show
forwarding	display fib information
nve	nve related info
l2	L2 info
ingress-replication-peers	ingress replication peer info
ipv4	(Optional) ipv4 peer
peer_ip	(Optional) show detailed info of a peer
ipv6	(Optional) ipv6 peer
__readonly__	(Optional)
TABLE_VLAN	(Optional) vlan peer ids table
vlan_id	(Optional) vlan id
vni	(Optional) vni
ifindex	(Optional) ifindex
plt_space	(Optional) platform space
peer_bmp	(Optional) peer bitmap
peer	(Optional) peer_address
TABLE_PSS_VLAN	(Optional) vlan-peer in pss
vlan_pss_id	(Optional) pss_peer_id
VNI	(Optional) vni
vtep	(Optional) vtep
peercnt	(Optional) peer count
pss_peer_bmp	(Optional) PSS peer bitmap
pss_peer	(Optional) peer address
marked	(Optional) marked
peer	(Optional) peer
id	(Optional) id
repl_id	(Optional) repl_id
oif	(Optional) oif
path_intf	(Optional) path intf name
hash_algo	(Optional) hash algo used
vcount	(Optional) vlan count
vlan_id	(Optional) vlan id
resync_vcount	(Optional) resync vlan count
resync_vlan_id	(Optional) resync vlan id
path	(Optional) ecmp path
hash	(Optional) ecmp hash
flags	(Optional) ecmp flags
nh	(Optional) ecmp nh
intf	(Optional) ecmp interfaces
pss_peer	(Optional) peer
pss_id	(Optional) id
pss_repl_id	(Optional) repl_id
pss_oif	(Optional) oif
pss_path_intf	(Optional) path intf name
pss_hash_algo	(Optional) hash algo used
pss_vcount	(Optional) vlan count
vlan_pss_id	(Optional) vlan id
pss_path	(Optional) pss path
pss_hash	(Optional) pss hash
pss_flags	(Optional) pss flags
pss_nh	(Optional) pss nh
pss_intf	(Optional) pss intf

Command Mode

/exec

show forwarding nve l3 adjacency tunnel

show forwarding nve l3 adjacency tunnel [ <tunnel_id> | all ] [ bd <bd_id> | detail | module <module> | table <table_id> ] [ __readonly__ TABLE_nvel3adj <tunnel_id> <bd_id> <table_id> <VNI> <DownStream> <Drop> <Refcount> <Origin> <State> <Del> [ <sw_index> <hw_index0> <hw_index1> <hw_index2> ] ]

Syntax Description


show
forwarding	display fib information
nve	nve related info
l3	Layer 3
adjacency	Adjacency info
tunnel	VXLAN tunnel
tunnel_id	(Optional) tunnel_id
all	(Optional) show adjacency info for all peers
bd	(Optional) BD info
bd_id	(Optional) bd id
detail	(Optional) Show detailed information
module	(Optional) Slot/module
module	(Optional) Slot/module number
table	(Optional) Tenant table-id
table_id	(Optional) tenant table-id
__readonly__	(Optional)
TABLE_nvel3adj	(Optional)
tunnel_id	(Optional) tunnel_id
bd_id	(Optional) bd id
table_id	(Optional) tenant table-id
VNI	(Optional) vni
DownStream	(Optional) DownStream
Drop	(Optional) Drop
Refcount	(Optional) Refcount
Origin	(Optional) origin
State	(Optional) state
Del	(Optional) del
sw_index	(Optional)
hw_index0	(Optional)
hw_index1	(Optional)
hw_index2	(Optional)

Command Mode

/exec

show forwarding nve l3 adjacency v6-tunnel

show forwarding nve l3 adjacency v6-tunnel [ <peer-ip> | all ] [ bd <bd_id> | detail | module <num> | table <table_id> ] [ __readonly__ TABLE_nvel3adj <peer-ip> <bd_id> <table_id> <VNI> <Drop> <Refcount> <Origin> <State> <Del> <sw_index> <hw_index0> <hw_index1> <hw_index2> ]

Syntax Description


show
forwarding	display fib information
nve	nve related info
l3	Layer 3
adjacency	Adjacency info
v6-tunnel	VXLAN V6 tunnel
all	(Optional) Show adjacency for all peers
bd	(Optional) BD info
bd_id	(Optional) bd id
detail	(Optional) Show detailed information
module	(Optional) Slot/module
num	(Optional) Slot/module number
table	(Optional) Tenant table-id
table_id	(Optional) tenant table-id
__readonly__	(Optional)
TABLE_nvel3adj	(Optional)
bd_id	(Optional) bd id
table_id	(Optional) tenant table-id
VNI	(Optional) vni
Drop	(Optional) Drop
Refcount	(Optional) Refcount
Origin	(Optional) origin
State	(Optional) state
Del	(Optional) del
sw_index	(Optional)
hw_index0	(Optional)
hw_index1	(Optional)
hw_index2	(Optional)

Command Mode

/exec

show forwarding nve l3 ecmp

show forwarding nve l3 ecmp [ __readonly__ { TABLE_nvel3ecmp <hw_index> <ecmp_hash> <num_paths> <table_id> <flags> <adj_flags> <ref_count> { TABLE_tunnel_info [ <tunnel_id> | <tunnel_ip> ] <segment_id> } <hw_ecmp_index0> <hw_ecmp_index1> <hw_ecmp_index2> } ]

Syntax Description


show
forwarding	display fib information
nve	nve related info
l3	Layer 3
ecmp	nve ecmp info
__readonly__	(Optional)
TABLE_nvel3ecmp	(Optional) nve l3 ecmp table
hw_index	(Optional) hw_index address pointer
ecmp_hash	(Optional) ecmp hash
num_paths	(Optional) numer of members in ECMP
table_id	(Optional) table id
flags	(Optional) flags
adj_flags	(Optional) adj flags
ref_count	(Optional) num of references
TABLE_tunnel_info	(Optional)
tunnel_id	(Optional) tunnel id
tunnel_ip	(Optional) v6 tunnel ip
segment_id	(Optional) segment id
hw_ecmp_index0	(Optional) HW ECMP Index Unit 0
hw_ecmp_index1	(Optional) HW ECMP Index Unit 1
hw_ecmp_index2	(Optional) HW ECMP Index Unit 2

Command Mode

/exec

show forwarding nve l3 peers

show forwarding nve l3 peers [ peers <peer_id> | tunnel <tunnel_id> | detail | module <module> ] + [ __readonly__ { TABLE_l3peers <tunnel_id> <peer_id> <peer_address> <interface> <rmac> <origin> <state> <del> <count> } ]

Syntax Description


show	show
forwarding	display fib information
nve	nve related info
l3	Layer 3
peers	nve peers
peer_id	(Optional) nve peer-id
tunnel	(Optional) VXLAN tunnel
tunnel_id	(Optional) Unique identifier for the tunnel
detail	(Optional) Show detailed information
module	(Optional) Slot/module
module	(Optional) Slot/module number
__readonly__	(Optional)
TABLE_l3peers	(Optional) all l3 nve peers
tunnel_id	(Optional) tunnel_id
peer_id	(Optional) peer_id
peer_address	(Optional) peer_address
interface	(Optional) interface
rmac	(Optional) rmac
origin	(Optional) origin
state	(Optional) state
del	(Optional) del
count	(Optional) count

Command Mode

/exec

show forwarding nve underlay-interfaces

show forwarding nve underlay-interfaces [ __readonly__ { <broadcast_status> <broadcast_level> <multicast_status> <multicast_level> <unicast_status> <unicast_level> <no_of_uplink_interfaces> } [ { TABLE_uplinks <ifindex> <peerid_bmp> <is_dci> [ <phy_if> ] } ] ]

Syntax Description


show	show
forwarding	display fib information
nve	NVE related info
underlay-interfaces	underlay interfaces info
__readonly__	(Optional)
broadcast_status	(Optional) status
broadcast_level	(Optional) broadcast level
multicast_status	(Optional) multicast status
multicast_level	(Optional) multicast level
unicast_status	(Optional) unitcast status
unicast_level	(Optional) unicast level
no_of_uplink_interfaces	(Optional) Number of uplink interfaces
TABLE_uplinks	(Optional)
ifindex	(Optional) uplink ifindex
phy_if	(Optional) uplink physical interface
peerid_bmp	(Optional) peerid bitmap
is_dci	(Optional) dci flag

Command Mode

/exec

show forwarding otv

show forwarding otv <intf> [ peer <peer-id> ] [ module <module> ] [ __readonly__ <vlan> <peer-id> <peer_vlan_count><tunnel_ifindex><tunnel_ifname> ]

Syntax Description


show
forwarding	fib information
otv	overlay-transport-virtualization
intf	overlay interface
peer	(Optional) overlay peer
peer-id	(Optional) overlay peer-id
module	(Optional) slot
module	(Optional) slot number
__readonly__	(Optional)
vlan	(Optional) Vlan information
peer-id	(Optional) peer-id

Command Mode

/exec

show forwarding otv ipv6 multicast route

show forwarding otv ipv6 multicast route [ vlan <vlan_id> ] [ module <module> ] [ __readonly__ [ <table_type> ] [ <vlan-id> ] [ <replicator> ] [ <num_routes> ] [ <num_starg_routes> ] [ <num_sg_routes> ] [ <num_gprefix_routes> ] [ <num_prefix_insert_fail> ] [ <num_groups> ] [ <num_sources> ] [ { TABLE_otv_mroute [ <src_addr> ] [ <src_len> ] [ <grp_addr> ] [ <grp_len> ] [ <df_ordinal> ] [ <rpfif> ] [ <flag> ] [ <route_pkts> ] [ <route_bytes> ] [ <otv_route_pkts> ] [ <otv_route_bytes> ] [ { TABLE_OIF <oif_count> [ <oiflist_id> ] [ <index> ] [ <refcount> ] [ { TABLE_OIFLIST <oifindex> [ <oif_pkts> ] [ <oif_bytes> ] [ <src_addr> ] [ <src_len> ] [ <oifname> ] [ <vlanid> ] [ <grp_addr> ] [ <grp_len> ] [ <otv_src_addr> ] [ <otv_grp_addr> ] } ] } ] } ] ]

Syntax Description


show	show
forwarding	forwarding
otv	over-the-top virtualization
ipv6	ipv6
multicast	Multicast IPv6 information
route	Mcast route information
vlan	(Optional) vlan
vlan_id	(Optional) vlan id
module	(Optional) slot
module	(Optional) slot number
__readonly__	(Optional)
table_type	(Optional) Table Type
vlan-id	(Optional) vlan id
replicator	(Optional) replicator name
num_routes	(Optional) Number of routes
num_starg_routes	(Optional) Number of (*,G) routes
num_sg_routes	(Optional) Number of (S,G) routes
num_gprefix_routes	(Optional) Number of (*,G-prefix) routes
num_prefix_insert_fail	(Optional) Prefix insert fail count
num_groups	(Optional) Number of group entries in the table
num_sources	(Optional) Number of (S, G) entries for the group address
TABLE_otv_mroute	(Optional)
src_addr	(Optional) Ipv6 address string
src_len	(Optional) Source Address Mask
grp_addr	(Optional) Ipv6 address string
grp_len	(Optional) Group address Mask
df_ordinal	(Optional) DF ordinal
rpfif	(Optional) RPF interface
flag	(Optional) Route type flag
route_pkts	(Optional) Route packet count
route_bytes	(Optional) Route bytes
otv_route_pkts	(Optional) OTV Route packet count
otv_route_bytes	(Optional) OTV Route bytes
TABLE_OIF	(Optional)
oif_count	(Optional) Number of OIFs
oiflist_id	(Optional) OIF list Identifier
index	(Optional) outgoing interface list index
refcount	(Optional) reference count
TABLE_OIFLIST	(Optional)
oifindex	(Optional) OIF Interface ifIndex
oif_pkts	(Optional) OIF packets
oif_bytes	(Optional) OIF bytes
src_addr	(Optional) Multicast IPv4 Source Address
src_len	(Optional) Source Address Mask
oifname	(Optional) OIF Interface name
vlanid	(Optional) vlan id of the route
grp_addr	(Optional) Multicast IPv4 Group Address
grp_len	(Optional) Group address Mask
otv_src_addr	(Optional) Multicast IPv4 Source Address
otv_grp_addr	(Optional) Multicast IPv4 Group Address

Command Mode

/exec

show forwarding otv multicast outgoing-interface-list

show forwarding otv multicast outgoing-interface-list [ __readonly__ { TABLE_OIF <index> [ <refcount> ] [ <intf> ] [ { TABLE_OIFLIST <oifindex> [ <src_addr> ] [ <src_len> ] [ <oifname> ] [ <vlanid> ] [ <grp_addr> ] [ <grp_len> ] } ] } ]

Syntax Description


show
forwarding	Forwarding information
otv	over-the-top virtualization
multicast	Multicast IPv4 information
outgoing-interface-list	show outgoing interface list info
__readonly__	(Optional)
TABLE_OIF	(Optional) outgoing interface list table
index	(Optional) outgoing interface list index
refcount	(Optional) reference count
intf	(Optional) interface name
TABLE_OIFLIST	(Optional) outgoing interface list table
oifindex	(Optional) OIF Interface ifIndex
src_addr	(Optional) Multicast IPv4 Source Address
src_len	(Optional) Source Address Mask
oifname	(Optional) OIF Interface name
vlanid	(Optional) vlan id of the route
grp_addr	(Optional) Multicast IPv4 Group Address
grp_len	(Optional) Group address Mask

Command Mode

/exec

show forwarding otv multicast route

show forwarding otv multicast route [ [ vlan <vlan-id> ] | [ softwarebd <software-bd> ] ] [ module <module> ] [ __readonly__ <replicator> ]

Syntax Description


show	show
forwarding	forwarding
otv	over-the-top virtualization
multicast	Multicast IPv4 information
route	Mcast route information
vlan	(Optional) vlan
vlan-id	(Optional) vlan id
softwarebd	(Optional) Software Bridge Domain
software-bd	(Optional) Software bd
module	(Optional) slot
module	(Optional) slot number
__readonly__	(Optional)
replicator	(Optional) replicator name

Command Mode

/exec

show forwarding otv vlan

show forwarding otv vlan [ <vlan_id> ] [ module <module> ] [ __readonly__ <vlan> ]

Syntax Description


show	show
forwarding	forwarding
otv	otv
vlan	vlan
vlan_id	(Optional) vlan id
module	(Optional) slot
module	(Optional) slot number
__readonly__	(Optional)
vlan	(Optional) vlan

Command Mode

/exec

show forwarding proactive-cc inconsistencies

show forwarding proactive-cc inconsistencies [ all ] [ __readonly__ [ <cc_status> ] [ TABLE_v4adj_hdr <incons_v4_adjs> [ TABLE_v4_adjs <id> <slot> <vrf> <ipaddr> <intf> <reason> <time> ] ] [ TABLE_v4route_hdr <incons_v4_routes> [ TABLE_v4_routes <id> <slot> <vrf> <ipprefix> <reason> <time> ] ] [ TABLE_v6adj_hdr <incons_v6_adjs> [ TABLE_v6_adjs <id> <slot> <vrf> <ipv6addr> <intf> <reason> <time> ] ] [ TABLE_v6route_hdr <incons_v6_routes> [ TABLE_v6_routes <id> <slot> <vrf> <ipv6prefix> <reason> <time> ] ] ]

Syntax Description


show	show
forwarding	Display Forwarding Information
proactive-cc	Proactive Consistency Checker
inconsistencies	Display latest CC run inconsistencies
all	(Optional) Display all previous CC run's inconsistencies
__readonly__	(Optional)
cc_status	(Optional) proactive cc status
TABLE_v4adj_hdr	(Optional) Table v4 adjacency header
incons_v4_adjs	(Optional) Inconsistent Adjacency header
TABLE_v4_adjs	(Optional) Table for v4 Adjacency
id	(Optional) Serial number
slot	(Optional) Slot number
vrf	(Optional) Vrf name
ipaddr	(Optional) Adjacency prefix
intf	(Optional) Interface
reason	(Optional) Inconsistency reason
time	(Optional) Timestamp
TABLE_v4route_hdr	(Optional) Table v4 route header
incons_v4_routes	(Optional) Inconsistent Route Header
TABLE_v4_routes	(Optional) Table for v4 routes
id	(Optional) Serial number
slot	(Optional) Slot number
vrf	(Optional) Vrf name
ipprefix	(Optional) Route Prefix
reason	(Optional) Inconsistency reason
time	(Optional) Timestamp
TABLE_v6adj_hdr	(Optional) Table v6 adjacency header
incons_v6_adjs	(Optional) Inconsistent v6 Adjacency header
TABLE_v6_adjs	(Optional) Table for v6 Adjacency
id	(Optional) Serial Number
slot	(Optional) Slot Number
vrf	(Optional) Vrf name
intf	(Optional) Interface
reason	(Optional) Inconsistency reason
time	(Optional) Timestamp
TABLE_v6route_hdr	(Optional) Table v6 Route header
incons_v6_routes	(Optional) Inconsistent route header
TABLE_v6_routes	(Optional) Table for v6 route
id	(Optional) Serial number
slot	(Optional) Slot number
vrf	(Optional) Vrf name
reason	(Optional) Inconsistency reason
time	(Optional) Timestamp

Command Mode

/exec

show forwarding security group-tag

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } | table <table_id> | vlan <vlan_id> ] [ ipv4 ] security group-tag [ <addr> ] [ module <module> | vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] + [ __readonly__ TABLE_sgt_vrf { <tid> <pfx-count> [ TABLE_sgt_prefix [ <ipa> ] [ <tag> ] [ <tv> ] ] } ]

Syntax Description


show
forwarding	display fib information
vrf	(Optional) display info per VRF
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
vrf-all	(Optional) Display information for all VRFs
table	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
table_id	(Optional) table number
vlan	(Optional) vlan
vlan_id	(Optional) vlan number
ipv4	(Optional) ipv4
security	display IP security information
group-tag	ip_address->security_group_tag
addr	(Optional) specific ip address
module	(Optional) slot
module	(Optional) slot number
__readonly__	(Optional)
TABLE_sgt_vrf	(Optional) vrf table
tid	(Optional) table identifier
pfx-count	(Optional) total prefix count in VRF
TABLE_sgt_prefix	(Optional) all xml prefix entries
ipa	(Optional) ip address
tag	(Optional) security group tag
tv	(Optional) sgt valid

Command Mode

/exec

show forwarding security mac

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } | table <table_id> ] [ ipv4 ] security mac [ <addr> ] [ module <module> | vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] + [ __readonly__ TABLE_sec_vrf { <tid> <pfx-count> [ TABLE_sec_prefix <ipa> <mac> <p> <m> <v> <intf> ] } ]

Syntax Description


show
forwarding	display fib information
vrf	(Optional) display info per VRF
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
vrf-all	(Optional) Display information for all VRFs
table	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
table_id	(Optional) table number
ipv4	(Optional) ipv4
security	display IP security information
mac	ip_address->mac_address
addr	(Optional) specific ip address
module	(Optional) slot
module	(Optional) slot number
__readonly__	(Optional)
TABLE_sec_vrf	(Optional) security vrf table
tid	(Optional) table identifier
pfx-count	(Optional) total prefix count in VRF
TABLE_sec_prefix	(Optional) all xml security prefix entries
ipa	(Optional) ip address
mac	(Optional) mac address
m	(Optional) 1 => ip->mac binding
v	(Optional) 1 => ip->vlan binding
p	(Optional) 1 => ip->port binding
intf	(Optional) ip->port interface

Command Mode

/exec

show forwarding srv6 adjacency decap

show forwarding srv6 adjacency decap [ table <table_id> ] [ module <num> ] [ __readonly__ { TABLE_adj_decap <locator> <function> <behavior> <tableid> <bd> <is_drop> } ]

Syntax Description


show	show
forwarding	display fib information
srv6	Segment routing V6
adjacency	SRV6 adjacency
decap	Decapsulation adjacency
table	(Optional) display info per vpn-id
table_id	(Optional) table number
bd	(Optional) Bridge domain
module	(Optional) Slot/module
num	(Optional) Slot/module number
__readonly__	(Optional)
TABLE_adj_decap	(Optional) all SRV6 decap adjacencies
locator	(Optional) Locator or binding sid
function	(Optional) Function
behavior	(Optional) Behavior
tableid	(Optional) tabled number
is_drop	(Optional) Indicates if adjacency is a drop

Command Mode

/exec

show forwarding srv6 adjacency encap

show forwarding srv6 adjacency encap [ table <table_id> ] [ module <num> ] [ __readonly__ { TABLE_adj_encap <loc_bsid> <source_ip> <function> <tableid> <is_drop> <bsid> } ]

Syntax Description


show	show
forwarding	display fib information
srv6	Segment routing V6
adjacency	SRV6 adjacency
encap	Encapsulation adjacency
table	(Optional) display info per vpn-id
table_id	(Optional) table number
module	(Optional) Slot/module
num	(Optional) Slot/module number
__readonly__	(Optional)
TABLE_adj_encap	(Optional) all SRV6 encap adjacencies
loc_bsid	(Optional) Locator or binding sid
source_ip	(Optional) Source IPV6 address
function	(Optional) Function
tableid	(Optional) tabled number
is_drop	(Optional) Indicates if adjacency is a drop
bsid	(Optional) binding sid

Command Mode

/exec

show forwarding srv6 bsid-peer

show forwarding srv6 bsid-peer [ <bsid_value> ] [ <endpoint> ] [ module <num> ] [ __readonly__ { TABLE_bsid_peer <bsid> <endpoint> <type> <table_id> <peer-id> } ]

Syntax Description


show	show
forwarding	display fib information
srv6	Segment routing V6
bsid-peer	Binding SID identifier
module	(Optional) Slot/module
num	(Optional) Slot/module number
__readonly__	(Optional)
TABLE_bsid_peer	(Optional) BSID peer table
bsid	(Optional) Bsid value
endpoint	(Optional) Endpoint
type	(Optional) BSID type
table_id	(Optional) Table ID
peer-id	(Optional) Peer ID

Command Mode

/exec

show forwarding srv6 bsid

show forwarding srv6 bsid [ <bsid_value> ] [ module <num> ] [ __readonly__ { TABLE_bsid <bsid> <type> <table_id> <num_sids> <sid_list> <list_count> } ]

Syntax Description


show	show
forwarding	display fib information
srv6	Segment routing V6
bsid	Binding SID
module	(Optional) Slot/module
num	(Optional) Slot/module number
__readonly__	(Optional)
TABLE_bsid	(Optional) BSID table
table_id	(Optional) Table ID
type	(Optional) BSID type
num_sids	(Optional) Number of SID's in list
bsid	(Optional) Bsid value
sid_list	(Optional) SID in list
list_count	(Optional) Number of dependent peer objects

Command Mode

/exec

show forwarding srv6 ecmp

show forwarding srv6 ecmp [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } | [ table <table_id> ] ] [ module <num> ] [ __readonly__ { TABLE_ecmp <num_paths> <table_id> { TABLE_adj <loc_bsid> <source_ip> <function> } } ]

Syntax Description


show	show
forwarding	display fib information
srv6	Segment routing V6
ecmp	SRV6 ecmp
vrf	(Optional) display info per VRF
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
vrf-all	(Optional) Display information for all VRFs
table	(Optional) display info per vpn-id
table_id	(Optional) table number
module	(Optional) Slot/module
num	(Optional) Slot/module number
__readonly__	(Optional)
TABLE_ecmp	(Optional) ecmp table
num_paths	(Optional) No of paths
table_id	(Optional) table number
TABLE_adj	(Optional) Adjacency table
loc_bsid	(Optional) Locator or binding sid
source_ip	(Optional) Source IPV6 address
function	(Optional) Function

Command Mode

/exec

show forwarding srv6 local-sid

show forwarding srv6 local-sid [ <sid_value> ] [ detail ] [ module <num> ] [ __readonly__ { TABLE_local_sid <locator> <source_ip> <function> <behavior> <sid> } ]

Syntax Description


show	show
forwarding	display fib information
srv6	Segment routing V6
local-sid	local segment identifier
detail	(Optional) Details about SID
module	(Optional) Slot/module
num	(Optional) Slot/module number
__readonly__	(Optional)
TABLE_local_sid	(Optional) Local SID info
locator	(Optional) Locator
source_ip	(Optional) Source IPV6 address
function	(Optional) function
behavior	(Optional) Behavior
sid	(Optional) Segment identifier

Command Mode

/exec

show forwarding srv6 peers

show forwarding srv6 peers [ module <num> ] [ __readonly__ { TABLE_peers <peer_id> <locator> <source_ip> <vobj_count> } ]

Syntax Description


show	show
forwarding	display fib information
srv6	Segment routing V6
peers	SRV6 peer
module	(Optional) Slot/module
num	(Optional) Slot/module number
__readonly__	(Optional)
TABLE_peers	(Optional) all SRV6 peers
peer_id	(Optional) peer_id
locator	(Optional) Locator
source_ip	(Optional) Source IPV6 address
vobj_count	(Optional) Number of VOBJs dependent on this peer

Command Mode

/exec

show forwarding trace

show forwarding trace [ clear ] [ module <module> ] [ __readonly__ <op> ]

Syntax Description


show
forwarding	display fib information
trace	display trace buffer
clear	(Optional) clear the trace buffer
module	(Optional) slot
module	(Optional) slot number
__readonly__	(Optional)
op	(Optional) output

Command Mode

/exec

show forwarding trace profile

Syntax Description


show
forwarding	display fib information
trace	display trace buffer
profile	show the collection profiling information

Command Mode

/exec

show forwarding trace profile funcstats

show forwarding trace profile funcstats [ enable | disable ] [ module <module> ] [ __readonly__ <op> ]

Syntax Description


show
forwarding	display fib information
trace	display trace buffer
profile	show the collection profiling information
funcstats	function statistics
enable	(Optional) enable function statistics
disable	(Optional) disable function statistics
module	(Optional) slot
module	(Optional) slot number
__readonly__	(Optional)
op	(Optional) output

Command Mode

/exec

show frequency synchronization clock-interface brief

show frequency synchronization clock-interface brief [ __readonly__ [ TABLE_fsync <clock_name> <source_class> <clock_node> <clock_id> <clock_state> <assigned_for_selection> <ssm_support> <ssm_enabled> <loop_back> <squelched> <input_disabled> <output_disabled> <ql_rcv_option> <ql_rcv> <ql_use_option> <ql_use> <priority> <ql_snt_option> <ql_snt> <selected_source_class> <selected_source_ifh> <selected_source_clock_node> <selected_source_clock_id> <selected_source_clock_name> ] <fsync-end> ]

Syntax Description


show	Show running system information
frequency	Frequency Synchronization Manager
synchronization	Frequency Synchronization Manager
clock-interface	Display clock-interface information
brief	Displays all interfaces
__readonly__	(Optional) Read Only
TABLE_fsync	(Optional) fsync_mgr table
source_class	(Optional) class of the source
clock_node	(Optional) clock's node id
clock_id	(Optional) clock's id
clock_name	(Optional) clock name
clock_state	(Optional) clock state
assigned_for_selection	(Optional) whether assigned as selection input
ssm_support	(Optional) ssm support - enabled or disabled
ssm_enabled	(Optional) ssm enabled - enabled or disabled
loop_back	(Optional) loopback enabled or disabled
squelched	(Optional) output is squelched or not
input_disabled	(Optional) input disabled or enabled
output_disabled	(Optional) output disabled or enabled
ql_rcv_option	(Optional) ql rcv option
ql_rcv	(Optional) ql rcv
ql_use_option	(Optional) ql use option
ql_use	(Optional) ql use
priority	(Optional) priority of synce port
ql_snt_option	(Optional) ql snt option
ql_snt	(Optional) ql snt
selected_source_class	(Optional) selected source class type
selected_source_ifh	(Optional) selected source ifh
selected_source_clock_node	(Optional) selected source clock node
selected_source_clock_id	(Optional) selected source clock id
selected_source_clock_name	(Optional) selected sourced clock name
fsync-end	(Optional) End of table

Command Mode

/exec

show frequency synchronization clock-interface detail

show frequency synchronization clock-interface detail [ __readonly__ [ TABLE_fsync <clock_name> <source_class> <clock_node> <clock_id> <clock_state> <clock_type> <pd_down_reason> <selection_input> <wtr_time> <ssm_state> <ssm_support> <input_disabled> <input_damping_state> <input_damping_time> <cfgd_in_ql_min_option> <cfgd_in_ql_min> <cfgd_in_ql_max_option> <cfgd_in_ql_max> <cfgd_in_ql_exact_option> <cfgd_in_ql_exact> <effective_in_ql_option> <effective_in_ql> <priority> <tod_priority> <supp_freq> <supp_time> <loop_back> <output_disabled> <selected_source_class> <selected_source_ifh> <selected_source_clock_node> <selected_source_clock_id> <selected_source_clock_name> <selected_source_ql_option> <selected_source_ql> <cfgd_out_ql_min_option> <cfgd_out_ql_min> <cfgd_out_ql_max_option> <cfgd_out_ql_max> <cfgd_out_ql_exact_option> <cfgd_out_ql_exact> <effective_out_ql_option> <effective_out_ql> <squelched> <num_next_seln_points> <next_selection_points> + <current_clock_end> ] <fsync-end> ]

Syntax Description


show	Show running system information
frequency	Frequency Synchronization Manager
synchronization	Frequency Synchronization Manager
clock-interface	Display clock-interface information
detail	details
__readonly__	(Optional) Read Only
TABLE_fsync	(Optional) fsync_mgr table
source_class	(Optional) class of the source
clock_node	(Optional) clock's node id
clock_id	(Optional) clock's id
clock_name	(Optional) clock name
clock_state	(Optional) clock state
clock_type	(Optional) clock's type
pd_down_reason	(Optional) clock pd down reason
selection_input	(Optional) whether assigned as selection input
wtr_time	(Optional) wait to restore timer value
ssm_state	(Optional) ssm state - enabled or disabled
ssm_support	(Optional) ssm supprt
input_disabled	(Optional) input disabled or enabled
input_damping_state	(Optional) input dampiung state
input_damping_time	(Optional) input damping time
cfgd_in_ql_min_option	(Optional) cfg in min ql option
cfgd_in_ql_min	(Optional) cfg in min ql option
cfgd_in_ql_max_option	(Optional) cfg in max ql option
cfgd_in_ql_max	(Optional) cfg in max ql option
cfgd_in_ql_exact_option	(Optional) cfg in exact ql option
cfgd_in_ql_exact	(Optional) cfg in exact ql option
effective_in_ql_option	(Optional) cfg in ql option
effective_in_ql	(Optional) cfg in ql option
priority	(Optional) priority
tod_priority	(Optional) time of day priority
supp_freq	(Optional) supporting freq sync or time sync
supp_time	(Optional) supporting time sync
loop_back	(Optional) loopback enabled or disabled
output_disabled	(Optional) output disabled or enabled
selected_source_class	(Optional) selected source class type
selected_source_ifh	(Optional) selected source ifh
selected_source_clock_node	(Optional) selected source clock node
selected_source_clock_id	(Optional) selected source clock id
selected_source_clock_name	(Optional) selected sourced clock name
selected_source_ql_option	(Optional) selected source ql option
selected_source_ql	(Optional) effective out ql option
cfgd_out_ql_min_option	(Optional) cfg out min ql option
cfgd_out_ql_min	(Optional) cfg out min ql option
cfgd_out_ql_max_option	(Optional) cfg out max ql option
cfgd_out_ql_max	(Optional) cfg out max ql option
cfgd_out_ql_exact_option	(Optional) cfg out exact ql option
cfgd_out_ql_exact	(Optional) cfg out exact ql option
effective_out_ql_option	(Optional) effective out ql option
effective_out_ql	(Optional) effective out ql option
squelched	(Optional) output is squelched or not
num_next_seln_points	(Optional) num of next seln points
next_selection_points	(Optional) next selection points
current_clock_end	(Optional) cuurent clock end
fsync-end	(Optional) End of table

Command Mode

/exec

show frequency synchronization configuration errors

show frequency synchronization configuration errors [ __readonly__ [ TABLE_fsync <fsync_src> <enable_err> <input_min_err> <input_exact_err> <input_max_err> <output_min_err> <output_exact_err> <output_max_err> <ext_ql_input_min_err> <ext_ql_input_exact_err> <ext_ql_input_max_err> <ext_ql_output_min_err> <ext_ql_output_exact_err> <ext_ql_output_max_err> <input_output_mismatch> <input_min_ql_option> <input_min_ql> <input_exact_ql_option> <input_exact_ql> <input_max_ql_option> <input_max_ql> <output_min_ql_option> <output_min_ql> <output_exact_ql_option> <output_exact_ql> <output_max_ql_option> <output_max_ql> <cmd_src_index> ] <fsync-end> ]

Syntax Description


show	Show running system information
frequency	Frequency Synchronization Manager
synchronization	Frequency Synchronization Manager
configuration	configuration
errors	errors
__readonly__	(Optional) Read Only
TABLE_fsync	(Optional) fsync_mgr table
fsync_src	(Optional) Interface Index
enable_err	(Optional) freq sync enable error
input_min_err	(Optional) Minimum input QL option config error
input_exact_err	(Optional) Exact input QL config error
input_max_err	(Optional) Maximum input QL option config error
output_min_err	(Optional) Minimum output QL option config error
output_exact_err	(Optional) Exact output QL option config error
output_max_err	(Optional) Maximum output QL option config error
ext_ql_input_min_err	(Optional) minimum input extended Ql config error
ext_ql_input_exact_err	(Optional) exact input extended Ql config error
ext_ql_input_max_err	(Optional) maximun input extended Ql config error
ext_ql_output_min_err	(Optional) min output extended ql config error
ext_ql_output_exact_err	(Optional) exact output extended ql config error
ext_ql_output_max_err	(Optional) max output extended ql config error
input_output_mismatch	(Optional) input/output mismatch error
input_min_ql_option	(Optional) input min ql option
input_min_ql	(Optional) configured min input ql
input_exact_ql_option	(Optional) input exact ql option
input_exact_ql	(Optional) configured exact input ql
input_max_ql_option	(Optional) input exact ql option
input_max_ql	(Optional) configured max input ql
output_min_ql_option	(Optional) output min ql option
output_min_ql	(Optional) configured min output ql
output_exact_ql_option	(Optional) output exact ql option
output_exact_ql	(Optional) configured exact output ql
output_max_ql_option	(Optional) output exact ql option
output_max_ql	(Optional) configured max output ql
cmd_src_index	(Optional) index for source array
fsync-end	(Optional) End of table

Command Mode

/exec

show frequency synchronization interface

show frequency synchronization interface <if0> [ __readonly__ <if_state> <selection_input> <wtr_time> <ssm_state> <esmc_peer_state> <esmc_peer_time_secs> <esmc_peer_time_nsecs> <last_ssm_time_secs> <last_ssm_time_nsecs> <peer_up_count> <peer_timeout_count> <esmc_infos_sent> <esmc_events_sent> <esmc_dnus_sent> <esmc_infos_rcvd> <esmc_events_rcvd> <esmc_dnus_rcvd> <esmc_malformed_rcvd> <esmc_rcvd_error> <input_damping_state> <input_damping_time> [ <last_rcvd_ql_option> ] [ <last_rcvd_ql> ] <cfgd_in_ql_min_option> <cfgd_in_ql_min> <cfgd_in_ql_max_option> <cfgd_in_ql_max> <cfgd_in_ql_exact_option> <cfgd_in_ql_exact> [ <effective_in_ql_option> ] [ <effective_in_ql> ] <priority> <tod_priority> [ <ql_data_rcvd_has_ext_data> ] [ <ql_data_rcvd_orig_clock_id> ] [ <ql_data_rcvd_synce_steps> ] [ <ql_data_rcvd_esynce_steps> ] [ <ql_data_rcvd_all_steps_synce> ] [ <ql_data_rcvd_chain_complete> ] <supp_freq> <supp_time> [ <selected_source_class> ] [ <selected_source_ifh> ] [ <selected_source_clock_node> ] [ <selected_source_clock_id> ] [ <selected_source_clock_name> ] [ <selected_source_ql_option> ] [ <selected_source_ql> ] <cfgd_out_ql_min_option> <cfgd_out_ql_min> <cfgd_out_ql_max_option> <cfgd_out_ql_max> <cfgd_out_ql_exact_option> <cfgd_out_ql_exact> [ <effective_out_ql_option> ] [ <effective_out_ql> ] [ <ql_data_to_send_has_ext_data> ] [ <ql_data_to_send_orig_clock_id> ] [ <ql_data_to_send_synce_steps> ] [ <ql_data_to_send_esynce_steps> ] [ <ql_data_to_send_all_steps_synce> ] [ <ql_data_to_send_chain_complete> ] <squelched> <num_next_seln_points> <next_selection_points> + ]

Syntax Description


show	Show running system information
frequency	Frequency Synchronization Manager
synchronization	Frequency Synchronization Manager
interface	Display interface information
if0
__readonly__	(Optional) Read Only
if_state	(Optional) interface state
selection_input	(Optional) whether assigned as selection input
wtr_time	(Optional) wait to restore timer value
ssm_state	(Optional) ssm state - enabled or disabled
esmc_peer_state	(Optional) esmc peer state
esmc_peer_time_secs	(Optional) peer up or down time recorded secs
esmc_peer_time_nsecs	(Optional) peer up or down time recorded nsecs
last_ssm_time_secs	(Optional) last ssm received time in secs
last_ssm_time_nsecs	(Optional) last ssm received time in nsecs
peer_up_count	(Optional) no of times peer went up
peer_timeout_count	(Optional) no of times peer timed out
esmc_infos_sent	(Optional) esmc infos sent
esmc_events_sent	(Optional) esmc events sent
esmc_dnus_sent	(Optional) esmc dnus sent
esmc_infos_rcvd	(Optional) esmc infos rcvd
esmc_events_rcvd	(Optional) esmc events rcvd
esmc_dnus_rcvd	(Optional) esmc dnus recvd
esmc_malformed_rcvd	(Optional) esmc malformed rcvd frames
esmc_rcvd_error	(Optional) esmc recv frame errors
input_damping_state	(Optional) input dampiung state
input_damping_time	(Optional) input damping time
last_rcvd_ql_option	(Optional) last ql rcv option
last_rcvd_ql	(Optional) last rcvd ql
cfgd_in_ql_min_option	(Optional) cfgd in ql min option
cfgd_in_ql_min	(Optional) cfg in ql min
cfgd_in_ql_max_option	(Optional) cfgd in ql mAX option
cfgd_in_ql_max	(Optional) cfgd in max ql
cfgd_in_ql_exact_option	(Optional) cfgd in ql exact option
cfgd_in_ql_exact	(Optional) cfgd in exact ql
effective_in_ql_option	(Optional) effe in ql option
effective_in_ql	(Optional) eff in ql
priority	(Optional) priority
tod_priority	(Optional) time of day priority
ql_data_rcvd_has_ext_data	(Optional) ql data rcvd extended data or not
ql_data_rcvd_synce_steps	(Optional) ql data rcvd synce steps
ql_data_rcvd_esynce_steps	(Optional) ql data rcvd extended synce steps
ql_data_rcvd_all_steps_synce	(Optional) ql data rcvd all steps synce or not
ql_data_rcvd_chain_complete	(Optional) ql data rcvd chain complete
supp_freq	(Optional) supporting freq sync or time sync
supp_time	(Optional) supporting time sync
selected_source_class	(Optional) selected source class type
selected_source_ifh	(Optional) selected source ifh
selected_source_clock_node	(Optional) selected source clock node
selected_source_clock_id	(Optional) selected source clock id
selected_source_clock_name	(Optional) selected sourced clock name
selected_source_ql_option	(Optional) selevted source ql option
selected_source_ql	(Optional) selected source ql
cfgd_out_ql_min_option	(Optional) cfgd out ql min option
cfgd_out_ql_min	(Optional) cfg out ql min
cfgd_out_ql_max_option	(Optional) cfgd out ql mAX option
cfgd_out_ql_max	(Optional) cfgd out max ql
cfgd_out_ql_exact_option	(Optional) cfgd out ql exact option
cfgd_out_ql_exact	(Optional) cfgd out exact ql
effective_out_ql_option	(Optional) eff out ql option
effective_out_ql	(Optional) effec out ql
ql_data_to_send_has_ext_data	(Optional) ql data to send extended data or not
ql_data_to_send_synce_steps	(Optional) ql data send synce steps
ql_data_to_send_esynce_steps	(Optional) ql data send extended synce steps
ql_data_to_send_all_steps_synce	(Optional) ql data send all steps synce or not
ql_data_to_send_chain_complete	(Optional) ql data send chain complete
squelched	(Optional) output is squelched or not
num_next_seln_points	(Optional) num of next seln points
next_selection_points	(Optional) next selection points

Command Mode

/exec

show frequency synchronization interface brief

show frequency synchronization interface brief [ __readonly__ [ TABLE_fsync <fsync_port> <if_state> <assigned_for_selection> <ssm_state> <esmc_peer_state> <squelched> [ <ql_rcv_option> ] [ <ql_rcv> ] [ <ql_use_option> ] [ <ql_use> ] <priority> [ <ql_snt_option> ] [ <ql_snt> ] [ <selected_source_class> ] [ <selected_source_ifh> ] [ <selected_source_clock_node> ] [ <selected_source_clock_id> ] [ <selected_source_clock_name> ] <port_end> ] <fsync-end> ]

Syntax Description


show	Show running system information
frequency	Frequency Synchronization Manager
synchronization	Frequency Synchronization Manager
interface	Display interface information
brief	Displays all interfaces
__readonly__	(Optional) Read Only
TABLE_fsync	(Optional) fsync_mgr table
fsync_port	(Optional) Interface Index
if_state	(Optional) interface state
assigned_for_selection	(Optional) whether assigned as selection input
ssm_state	(Optional) ssm state - enabled or disabled
esmc_peer_state	(Optional) esmc peer state
squelched	(Optional) output is squelched or not
ql_rcv_option	(Optional) ql rcv option
ql_rcv	(Optional) ql rcv
ql_use_option	(Optional) ql use option
ql_use	(Optional) ql use
priority	(Optional) priority of synce port
ql_snt_option	(Optional) ql snt option
ql_snt	(Optional) ql snt
selected_source_class	(Optional) selected source class type
selected_source_ifh	(Optional) selected source ifh
selected_source_clock_node	(Optional) selected source clock node
selected_source_clock_id	(Optional) selected source clock id
selected_source_clock_name	(Optional) selected sourced clock name
port_end	(Optional) end of current port
fsync-end	(Optional) End of table

Command Mode

/exec

show frequency synchronization selection

show frequency synchronization selection [ __readonly__ [ TABLE_sp <seln_pt> <num_inputs> <num_inputs_selected> <last_programmed_secs> <last_programmed_nsecs> <last_selection_secs> <last_selection_nsecs> [ <spa_selection_points> + ] [ <spa_selection_points_num> ] [ <node_selection_points> + ] [ <node_selection_points_num> ] [ <chassis_selection_points> + ] [ <chassis_selection_points_num> ] [ <router_selection_points> + ] [ <router_selection_points_num> ] <tod_sp> <local_line_output> <local_clock_output> <local_tod_output> <stream_table_start> [ TABLE_stream <output_id> <input> <last_sp> <ql> [ <tod_priority> ] <priority> <state> ] <stream-end> ] <sp-end> ]

Syntax Description


show	Show running system information
frequency	Frequency Synchronization Manager
synchronization	Frequency Synchronization Manager
selection	Display selection information
__readonly__	(Optional) Read Only
TABLE_sp	(Optional) fsync_mgr table
seln_pt	(Optional) selection points
num_inputs	(Optional) num of inputs
num_inputs_selected	(Optional) num of inputs
last_programmed_secs	(Optional) last programmed time:secs
last_programmed_nsecs	(Optional) last programmed time:nsecs
last_selection_secs	(Optional) last selection time:secs
last_selection_nsecs	(Optional) last selection time:nsecs
spa_selection_points	(Optional) SPA selection points
spa_selection_points_num	(Optional) Number of SPA selection points
node_selection_points	(Optional) Node selection points
node_selection_points_num	(Optional) Number of node selection points
chassis_selection_points	(Optional) chassis selection points
chassis_selection_points_num	(Optional) Number of chassis selection points
router_selection_points	(Optional) router selection points
router_selection_points_num	(Optional) Number of Router selection points
tod_sp	(Optional) Use Time of day selection point else freq sp
local_line_output	(Optional) used for local line output or not
local_clock_output	(Optional) used for local clock output or not
local_tod_output	(Optional) used for local time of day output or not
stream_table_start	(Optional) stream table start
TABLE_stream	(Optional) stream table
output_id	(Optional) output id of stream
input	(Optional) source input for the stream
last_sp	(Optional) last selection point string
ql	(Optional) QL of the selected source
tod_priority	(Optional) time of day priority
priority	(Optional) priority of source
state	(Optional) state of the stream
stream-end	(Optional) End of SP table
sp-end	(Optional) End of SP table

Command Mode

/exec

show fspf

Syntax Description


show	Show running system information

Command Mode

/exec

show fspf database

show fspf database [ vsan <i0> [ [ domain <i1> ] [ detail ] ] ]

Syntax Description


show	Show running system information
database	Show FSPF link state database
vsan	(Optional) Enter VSAN
i0	(Optional) VSAN id
domain	(Optional) Show LSR of a domain
i1	(Optional) domain index
detail	(Optional) Gives detailed information on the LSR

Command Mode

/exec

show fspf interface

Syntax Description


show	Show running system information
interface	Show FSPF related information about an interface

Command Mode

/exec

show fspf vsan

show fspf vsan <i0>

Syntax Description


show	Show running system information
vsan	Enter VSAN
i0	VSAN id

Command Mode

/exec

show fspf vsan interface

show fspf vsan <i0> interface [ <if0> ]

Syntax Description


show	Show running system information
vsan	Enter VSAN
i0	VSAN id
interface	Show FSPF related information about an interface
if0	(Optional) Show FSPF related information about an interface

Command Mode

/exec

show fte event

show fte event [ name ] [ { <eventname> } ] [ __readonly__ [ { TABLE_fte_event <event> [ <description> ] <use_count> [ { TABLE_fte_group <events> [ <buffer_drops> ] [ <fwd_drops> ] [ <acl_drops> ] [ <flow_count> ] [ <latency_threshold> ] [ <latency_unit> ] [ <latency_flow_count> ] } ] } ] ]

Syntax Description


show	Show running system information
fte	Show FTE information
event	Show Event Configuration
name	(Optional) Show the configuration for a specific FTE Event
eventname	(Optional) Specify a event
__readonly__	(Optional)
TABLE_fte_event	(Optional) Event Table
event	(Optional) Fte event
description	(Optional) Description of FTE event
use_count	(Optional) Use count of FTE event
TABLE_fte_group	(Optional)
events	(Optional) Drop or Latency type of events
buffer_drops	(Optional) Capture buffer-drops
fwd_drops	(Optional) Capture fwd-drops
acl_drops	(Optional) Capture acl-drops
flow_count	(Optional) Drop type flow count
latency_threshold	(Optional) Latency threshold value
latency_unit	(Optional) Unit for latency threshold measurement
latency_flow_count	(Optional) Latency type flow count

Command Mode

/exec

show fte exporter

show fte exporter [ name ] [ <exportername> ] [ __readonly__ <exporter> <description> <dest> <vrf> <vrf_id> <vrf_resolved> <dest_udp> <source_intf> <source_ip> <exporter-id> ]

Syntax Description


show	Show running system information
fte	Show FTE information
exporter	Show FTE Exporter Configuration
name	(Optional) Show a specific FTE Exporter
exportername	(Optional) Specify an exporter
__readonly__	(Optional)
exporter	(Optional)
description	(Optional)
dest	(Optional)
vrf	(Optional)
vrf_id	(Optional)
vrf_resolved	(Optional)
dest_udp	(Optional)
source_intf	(Optional)
source_ip	(Optional)
exporter-id	(Optional)

Command Mode

/exec

show fte monitor

show fte monitor [ name ] [ <monitorname> [ cache [ detailed ] ] ] [ __readonly__ <monitor> <use_count> <description> <record> <event> <exporter1> <exporter2> <bucket_id> <src_addr> <dest_addr> ]

Syntax Description


show	Show running system information
fte	Show FTE information
monitor	Show Monitor Configuration
name	(Optional) Show a specific FTE Monitor
monitorname	(Optional) Specify a monitor
cache	(Optional) Flow monitor cache contents
detailed	(Optional) Show the entire cache contents
__readonly__	(Optional)
monitor	(Optional)
use_count	(Optional)
description	(Optional)
record	(Optional)
event	(Optional)
exporter1	(Optional)
exporter2	(Optional)
bucket_id	(Optional)
src_addr	(Optional)
dest_addr	(Optional)

Command Mode

/exec

show fte record

show fte record [ name ] [ { <recordname> } | { fte-original } | { fte { protocol-port | layer2-switched { input } | { ipv4 | ipv6 | l2 } { original-input } } } ] [ __readonly__ [ { TABLE_fte_record <record> [ <description> ] <use_count> [ <match_ipv4_params> + ] [ <match_ipv6_params> + ] [ <match_datalink_params> + ] } ] ]

Syntax Description


show	Show running system information
fte	Show FTE information
record	Show Record Configuration
name	(Optional) Show the configuration for a specific FTE Record
recordname	(Optional) Specify a record
fte-original	(Optional) Traditional IPv4 input FTE with origin ASs
fte	(Optional) Traditional FTE collection schemes
ipv4	(Optional) IPv4 collection schemes
ipv6	(Optional) IPv6 collection schemes
l2	(Optional) L2 collection schemes
layer2-switched	(Optional) Layer2-Switched collection schemes
original-input	(Optional) Input FTE
input	(Optional) Input FTE
protocol-port	(Optional) Protocol and Ports aggregation scheme
__readonly__	(Optional)
TABLE_fte_record	(Optional) Record Table
record	(Optional) FTE Record
description	(Optional) Description for FTE description
use_count	(Optional) Use count for FTE record
match_ipv4_params	(Optional) Match IPv4 parameters under record
match_ipv6_params	(Optional) Match IPv6 parameters under record
match_datalink_params	(Optional) Match datalink parameters under record

Command Mode

/exec

Bias-Free Language

Results

Chapter: F Show Commands

F Show Commands

show fabric-binding database

show fabric-binding efmd statistics

show fabric-binding fip

show fabric-binding statistics

show fabric-binding status

show fabric-binding violations

show fabric database dci

show fabric database host

show fabric database host statistics

show fabric database host summary

show fabric database profile-map

show fabric database static-host

show fabric database statistics

show fabric forwarding host-db

show fabric forwarding ip local

show fabric forwarding ipv6 local

show fabric multicast globals

show fabric multicast ipv4 l2 vni

show fabric multicast statistics

show fabric multicast vrf

show fabric switch information

show fc2 bind

show fc2 classf

show fc2 exchange

show fc2 exchresp

show fc2 flogi

show fc2 nport

show fc2 plogi

show fc2 plogi_pwwn

show fc2 port brief

show fc2 port drops

show fc2 port state

show fc2 socket

show fc2 sockexch

show fc2 socknotify

show fc2 socknport

show fc2 vsan

show fcalias

show fcdomain

show fcdomain address-allocation

show fcdomain allowed

show fcdomain domain-list

show fcdomain fcid persistent

show fcdomain pending-diff

show fcdomain pending

show fcdomain session-status

show fcdomain statistics

show fcdomain status

show fcdomain vsan

show fcdroplatency

show fcid-allocation area

show fcid-allocation company-id-from-wwn

show fcns database

show fcns statistics

show fcoe-npv issu-impact

show fcoe

show fcoe database

show fcs database

show fcs ie

show fcs platform

show fcs port

show fcs statistics

show fcs vsan

show fctimer

show fctimer D_S_TOV

show fctimer E_D_TOV

show fctimer F_S_TOV

show fctimer R_A_TOV

show fctimer last action status

show fctimer pending-diff

show fctimer pending

show fctimer session status

show fctimer status

show fctimer vsan

show fdmi database