Cisco Nexus 9000 Series NX-OS Virtual Machine Tracker Configuration Guide, Release 10.1(x)
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- September 11, 2023
Chapter: Index
Contents
Index
A
allowed-vlans 1allowed-vlans add 1allowed-vlans all 1allowed-vlans except 1allowed-vlans remove 1autovlan enable 1C
connect 1F
feature vmtracker 1P
password 1R
remote ip address 1remote port 1remote vrf 1S
set interval find-new-host 1set interval sync-full-info 1show logging level vmtracker 1show running-config vmtracker 1show running-config vmtracker all 1show vmtracker connection 1show vmtracker event-history 1show vmtracker info 1show vmtracker info detail 1show vmtracker info host 1show vmtracker info interface 1show vmtracker info port-group 1show vmtracker info summary 1show vmtracker info vm 1show vmtracker status 1show vpc consistency-parameters global 1U
username 1V
vmtracker enable 1
Feedback