Release Notes for Cisco Remote PHY for Cisco 1x2 / Compact Shelf RPD Software 2.2

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Release Notes for Cisco Remote PHY for Cisco 1x2 / Compact Shelf RPD Software 2.2

Chapter Title

Introduction

Results

Updated:
August 14, 2018

Chapter: Introduction

Introduction

This release notes contain information about downloading and installing Cisco 1x2 / Compact Shelf RPD Software 2.2 and its maintenance releases. It also provides new and changed information, hardware support, limitations and restrictions, and caveats for Cisco 1x2 / Compact Shelf RPD Software 2.2 and its maintenance releases.

We recommend that you view the field notices for this release to see if your software or hardware platforms are affected. If you have an account on Cisco.com, you can find field notices at http://www.cisco.com/en/US/customer/support/tsd_products_field_notice_summary.html .

If you do not have a Cisco.com login account, you can find field notices at http://www.cisco.com/en/US/support/tsd_products_field_notice_summary.html .


Note
Cisco 1x2 / Compact Shelf RPD Software 2.2 is generally available for field deployment. However, we recommend that you validate and qualify Cisco 1x2 / Compact Shelf RPD Software 2.2 in a limited field trial with your specific network configuration requirements in order to ensure a smoother, faster, and successful field deployment.

This chapter includes the following sections:

System Requirements

These sections describe the system requirements for Cisco 1x2 / Compact Shelf RPD Software and its maintenance releases:

Memory Requirements for Cisco 1x2 / Compact Shelf RPD Software 2.2


Note
Memory is not configurable for the Cisco Remote-PHY device.
Table 1. Memory Recommendations for the Cisco Remote-PHY Device

Feature Set

Cisco RPHY Processor

Software Image

Fixed Memory

Runs From

CISCO RPHY 2.2

NXP LS1043A

RPD-V2-2.itb.SSA

1G Bytes

Bootflash:

Determining the Software Version for Cisco 1x2 / Compact Shelf RPD Software 2.2

To determine the version of the Cisco 1x2 RPD software running on your Cisco Remote-PHY Device, log in and enter the show version EXEC command: 

R-PHY#show ver
Cisco RPD Software, version v2.2, build by rpd-release, on 2017-10-24 09:06:29
Branch information:
        RPD branch: (detached from RPD_V2_2_20171024)
        OpenRPD branch: (detached from RPD_V2_2_20171024)
        SeresRPD branch: (detached from RPD_V2_2_20171024)
 
System image file is:
current image is /bootflash/RPD-V2-2.itb.SSA.act
 
Bootloader version:
Primary:  U-Boot 2016.01 (Apr 12 2017 - 09:13:28 +0800) *
Golden:   U-Boot 2016.01 (Apr 12 2017 - 09:13:28 +0800)
 
IOFPGA version:
IOFPGA: 0x0351
SECVER: 0x17042101
 
System uptime:
05:15:34 up 4 min,  load average: 0.76, 0.63, 0.26
 
System CPU information:
processor       : 0
Features        : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant     : 0x0
CPU part        : 0xd03
CPU revision    : 4
 
processor       : 1
Features        : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant     : 0x0
CPU part        : 0xd03
CPU revision    : 4
 
processor       : 2
Features        : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant     : 0x0
CPU part        : 0xd03
CPU revision    : 4
 
processor       : 3
Features        : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant     : 0x0
CPU part        : 0xd03
CPU revision    : 4
 
 
System memory information:
MemTotal:         898128 kB
MemFree:          210184 kB
MemAvailable:     277148 kB
Buffers:            2260 kB
Cached:            71732 kB
 
Hardware Information:
Hardware Version               : 1.1
Product Number (PID)           : RPHY-RPD
PCA Serial Number              : CAT2109E1C9
Asset ID                       : P1B-13
System MAC Address             : 10:04:9f:b1:13:00
R-PHY#

Note

System image file name for a factory installed image is /bootflash/RPD-V2-2.itb. System image file name for a Secure Software Download(SSD) from the Cisco software download page is /bootflash/RPD-V2-2.itb.SSA.

New and Changed Information

The following sections list the new hardware and software features supported on the Cisco cBR Series Converged Broadband Routers in this release:

New Software Features in Cisco 1x2 / Compact Shelf RPD Software 2.2

There are no new software features in Cisco 1x2 / Compact Shelf RPD Software 2.2.

Modified Software Features in Cisco 1x2 / Compact Shelf RPD Software 2.2

There are no modified software features in Cisco 1x2 / Compact Shelf RPD Software 2.2.

Integrated Software Features in Cisco 1x2 / Compact Shelf RPD Software 2.2

There are no integrated features in Cisco 1x2 / Compact Shelf RPD Software 2.2 release.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco